Video

I don't get it. Your first measurements on stands showed a bass heavy curve, then you put then on that desk, and it became bass light? Or you also changed the acoustic treatment between measurements? Or before they were exciting more the corners, due to their positioning, and then, since they are a bit away from the corners bass response got more even? The big lesson here is that speaker positioning is key, and don't put it at (exciting) the corners. You should get REW software (free) and make a waterfall graph to see what is actually going on. Cheers, thanks for the vid!

Stay blessed 🙌

Did bruh use wu tang in this to?

Buy an mpc live 2 or one for less than that and have a box that does multiple things instead of a thousand bucks 1 trick pony

smh You make it look so easy lol Ive had my SP for two weeks and I'm still trying to get use to it coming from MPC"s

RCA output? lmao

Love your content 🔥🔥🔥🔥

I bought this interface and my 16rig is defective. It took Arturia almost 3 months to understand the issue and finally decide my unit was defective. Now they want to repair it so I'll be without an interface for a month more than likely... Really disappointing, but wanted to post here so other folks stayed away from this interface. Get an RME interface.

I have the kallax with 2 x 1210s and Xone mixer. Id like one of these ... but i cant find one?

This is dope. I Appreciate the shared knowledge

MPC Live II dont have a good song 90's

Track for track off a sample. Let's be clear. Drums, snare, bass drum, hi-hat , .....bass guitar, guitar, other samples,.... pull it apart and make it individual. Tearing global effects from insert effects yet it's samples and not effects being broken down individually. We did this with 45's at 8 bit many years ago. Nothing new just trying to make money on another format. We've been doing it before computers/DAWS. Gemini made an 8 bit rack mount sampler that would do about 8 seconds way back. Ask Kanye

fatar keybed ?

Hello! I have a question for users of this drum machine: So, the body of my unit from below heats up quite noticeably Is this normal? Also the encoders under the display sometimes give erroneous values, for example when adjusting the amount of reverb or filter etc Are there similar nuances in your Drumlogue? 1.2.0 software, also i initialize full reset of device rotate the encoders both very quickly and very slowly, and it happens that I rotate the encoder to the right to increase the value, but sometimes it, on the contrary, abruptly changes downward this is weird Does this happen to you? and this drum machine heats up noticeably in the area of ​​the plastic bottom, somewhat similar in temperature and sensation to heating a laptop

They should put the valve on it.

If you had to recommend a beat machine for a newbie, would you say something like this where it has pretty expansive functionality? Or something more limited where the learning curve wouldn’t be as steep? Any rec’s?

Love this great video and beat and appreciate the scratching too 🔥🔥🔥you look like you’re a master on the key 61. I’ve just bought one so looking forward to using it soon when I have time 😂

Can I use it with a yamaha p225 ?? 88 piano keys

Great stablemate for sp404mk2 but would only buy it at 500 🇬🇧 pounds

Sampling is an art form flat out whether people like it or not. The fact remains the same. Everyone in the music industry is sampling so it needs to get used to it.

👍🏿 nice

This is dope I recently bought a machine plus because now they have a price drop those records you’ve bought is fire 🔥 as well bruh nice job 👍

I think what happened at the end was awesome (the whole video was awesome) it solidified further to myself my one and only rule when I got back into producing music. If it sounds good, it’s good. But try to make music fun, use new gear, new sounds, new records, instruments, Daws, collaborate with musicians. That’s what it’s about.

Need a Mark II balanced TRS I/O

Isn't it supposed to be 'portable' think that's its selling point its size.

Could you load keyscape onto this?

Hey man, what’a the gear that you use in this video ?

Why does the samples sound so ringing/granny? Love it! Are you running the sp1200 mode on the Mpc One or is there any other kind of extra processing?

Talk talk talk....where the sound and all

The RAM issue is nothing for the truly creative. I’ve had my AK-37 for three days now and it simply smashes any other keyboard workstation out right now for a lot of reasons: workflow, functionality, sounds, expandability, inspiration, multi music genre applicability and more. Dollar for data this is the best gear buy for me in over 10 years. Props to Akai.

価格が問題。

Waaaaaaaaaaaaaaay too expensive

BIG NO FOR ME. They could have made a new electribe 3 with this. And they failed again . All most of us wanted for years was a new electribe with sample banks ,and the polyphony to match . I would have bought 2 but nope 👎

The only folks I’ve seen demoing it were sent it...RRRREEEEAAAALLLY intrigued by it as a live tool but it’s been hard to gauge its application and usage cases honestly so this was a refreshing later visit. Korg could do themselves some real favours allowing more open access to their design teams as they’re clearly brilliant but make such obtuse choices I’d LOVE to hear their thoughts and processes

I mean you can use the cue buttons as slices for a sample and you can save those slices and the sample to one pad. That intrigued me big time. The ability to have a sample and slices all on one pad…you can have a ton of samples and slices all accessible. If you are producing for sample heavy genres like Plunderphonics, that would be a dream.

cool scratching

learning the physics of sound is always amazing. I'm also looking to get all in 1 speakers and these seem the best option available. Great video production too, we appreciate that

i looked at the teenage engineering thing then the 404 then this then back to the 404 and im pretty damn happy especially with the looper patch.

I purchased Arturia Audiofuse 16 Rig, worked solid for 3 weeks. Setup was straight forward, learning curve with AudioFuse Control Center wasn't too bad. Then last week it would no longer be recognized by AudioFuse Control Center, did a power cycle and it would not power back up. Attempted to contact Arturia support and the only way to contact them is via email. Sent email and they reply within 2 hrs with generic troubleshooting steps, power cycle, ensure it's connected to a functional power source, etc.. Ask that I send them a video Thank you for reaching out to us and sorry to read about these inconveniences. Did you out of curiosity tested the power adapter with a Voltmeter and if not, do you have any to just confirm the voltage currently outputted? If confirmed as faulty, we should be able to ship a replacement power supply as soon as possible. -Could you please just also confirm that you always ensure holding the "A" button at least one or two sec (as just pressing it really fast may not allow it to power on)? -Also, if you look at the back of your unit do you see any Red light coming from the ADAT ports or not at all? -Finally, if you hold during a few seconds (around 5 sec) the "A" button and then try to open the "AudioFuse Control Center" is it seeing the unit as being currently plugged in or not (and possibly asking for any firmware update)? If this persists, make sure to provide the following information: -- Your proof of purchase (Dated invoice / bill): -- Your full name: -- Your shipping address: -- Zip Code: -- Your phone number: -- Proof of defect: Video showing the currently observed behavior (and if possible, the outputted voltage or the fact that another power adapter is working fine if you have any compatible one). Please find below the adapter specifications: Voltage Internal Diameter External Diameter Length Polarity 15V DC 3A 2.5mm 5.5mm 10mm Center Positive Thank you by advance and looking forward to hearing from you! Best Regards, Léo - Arturia Support I send them back everything including the video that describes the problem in detail. I get a reply back saying. "Usually, technical requests get answered within 48h. However, this could take longer as some of our staff are enjoying the Christmas holidays with their families. If you haven't received any answer from us yet, please do not send us another one as this may add extra time in processing your request. Thanks for understanding, and happy holidays! ****** This email is a service from Arturia Support." I got this email a week ago. it's currently May 2024. This company must give extended time off for Christmas. I ended up sending this unit back to return. I would advise not to go with Arturia due to the lack of support that you will get. Investing in a product from a company you can't pick a phone up to call and appears as they don't care about customers.

Did you purchase the push 3 at the end?

First review to get it right. Your right about the price but since my KP-3 went belly up and I also got better price I bought it. I own more Korg products than the other manufacturers and they put some dubious products on the market, but at least they are trying something new. Disappointed they're no new effects. I wonder if they are going to release a new Kossiloter with the same form. If it has a proper arp they will have my money.

PREEEMOOOO!!!!!!

enjoy your way of presenting a great deal. model series is way more direct than other elektron gear, even digitakt. these small boxes made me realize that I do need knob per function. imo they really shine when you treat them as an instrument.

4:11 4:13 😮😮😮😮😮😮😮

Korg R&D needs to retire. Aint no one paying 1k for these especially with that antiquated i/o. Gonna be pushing as many as they can out to influencers though. At least someone is winning 😂

Hi, excellent video... I'm French and new here. I'm also a kind of what the future generation of luthiers will be like ==> I'm working on something really innovative, a new electric guitar/bass «system» ! A world that has little market interest today compared to keyboards or plug-in but which is still innovative (^^) AND… I’m here because I have a synth guitar project, specially based on this Korg Kaoss Pad DIY kit + few other specific stuffs. So thank you very much for this video ! 🙏🙏🙏🙏 Also I'd like to ask anyone in your community who might like to respond [ considering this instrument could be easier to use to make good sounds aslike "exploitable" than with a standard guitar plus the effect pedals usual on the market for guitarists // this for techno-electro or something ] ====> Do you think this might be of interest to some people who don't yet play guitar, for this kind of new experience I'm working on, or not ? Do you see this kind of demand around you, considering the guitarists or any kind of musicians ? If yes, how much important could you say it is, between 0 to 10 for each ? Much love to you all... ❤

Its ridiculously overpriced, and the i/o is such a turn off that it just exacerbates the price even more. Its like Korg is beligerantly trying to get a rise out of everybody by saying " we got something really cool here, for a ridiculous price, and even more ridiculous hardware outfitted on it, whatchya think?" Its like discovering a column-shift automatic on a tinted out 5.0 litre mustang done right up until you open the door.....

Hey man. I sent you a mail the other day (with a question). Did you get a chance to look at it? 🙏

I want to make a necklace with this in the middle 😅

I like it but all, but at what level in progress after 10 Years of using effects would you consider this useful and not just muddy effects on a master