Brilliant CNC Machining Techniques of the past year at TITANS of CNC on DN Solutions machines using Kennametal tooling. #Machining #Machinist #Engineering #cnc
I did not know there was a splining broach; I learn something every time. Jessie should do a collab with Linus from LTT dropping expensive things 🙂 That upper came out amazing, especially the internal details.
8:40 we had similar pockets in parts for asg ris (which should be generally casted). I assumed special t-slot mill. We had generally brainstorm whether these pocket should be casted or machined.
@@TITANSofCNC you guys are really awesome! I'm well past my prime, but I have shared a ton of your videos with my youngest son. Hope he will get the hint!
I am just realizing that you still use the imperial system to make all these machine settings. A system based on variables to do some basic measurements like the weight of witches, whether to burn them or not and for farmers and retailers to sell their groceries because there was nothing else. It is like the English driving right handed and have to use their left hand for the center controles settings, like a self created handicap. So I have even more respect for the nice things you are creating and showing us.
I appreciate what you guys did to machine this part. It was a difficult part, but why did you just reupload a shortened version of video you guys released months ago? Did you think that not enough people would notice? In that case you were right. However it still just rubs me the wrong way to just reupload something you guys already did. Do more creative stuff like the jade endmill that was really creative and interesting.
Dear Sir ! If you don't mind can I ask you a question that how can I will reach in your factory for training and in your country if there is training college of CNC machines which gives training for students and sponsor the Visa process.i have a knowledge of CNC programming And CNC turning machine .And I want further training in your country because in Balouchistan there is no training center.Kindly can you tell me about the training institute which can sponsor Visa and gives the training of CNC machines..@@TITANSofCNC
12:00 I did almost the exact same thing but the even bigger problem was that it wasnt even a nice part that I made... I was just admiring the insane work of one of my coworkers I've never been more embarassed at work than that and never been as sorry - I was able to fix the dents but GOD DAMN I hated myself
I’m a simple man. I see a part of the AK-50, I click.
That's exactly why I didn't even get to read what the video was about, and why I'm here, too.
Crunk need ak fiddy!
LOVE love watching and learning about stuff these guys do. Big PLUS for doing AK-50 part!
💜
Me too
The part drop and kick at the end.....priceless.........I've dug a few parts out of the chip bin after using the tab function....😂
Happens with me most of the times 😂😂😂
Happens to the best of us.
I did not know there was a splining broach; I learn something every time. Jessie should do a collab with Linus from LTT dropping expensive things 🙂
That upper came out amazing, especially the internal details.
Awesome video with complete part and no second ops! That drop and kick at the end almost made me spray beer out my nose lol 😂
the part drop at the end 🤣
Where my ak-fitty, BRANDAN!?!?? LETS GOOOOO!!!!!
Great vid you guys! Love the music 🎶 of the machines 👊🔥
That's a handguards for a certain CZcams Ak-50!!!
8:40 we had similar pockets in parts for asg ris (which should be generally casted). I assumed special t-slot mill. We had generally brainstorm whether these pocket should be casted or machined.
That sound bring a tear to my eye
Thanks for the video. At the end of the video, I laughed heartily, especially when you kicked the finished product.
Inspiring. Thanks!
Pretty amazing work...
I see an AK-50 piece. You have my undivided attention.
3dp electrodes and edm/ecm can be handy for complex internal geometry. Drill/mill the windows then use nylon screws to hold electrodes in place.
I sure do miss machining.
Sounds looking like animal movie sound 😂 too satisfying
That is a beautiful piece of machining right there. Good job folks. I'm stuck in little old 3 axis land over here.
I wish my high school did more with cnc I kinda have to push for it and learn all on my own
More with CNC? Were do u live were ur learning any machining in HS?
@@verakoo6187 Michigan in the USA The only machine i have access to is a haas tm1p
Can't wait for those to be available.
I hope you have a very thick wallet 😁
@@phillhuddleston9445 I don't think it's thick enogh lol, after seeing the machining.
LET'S GO BRANDON.....!!!! The AK-50 Brandon.... Awesome video with a nice chuckle at the end.
Looks like Brandon's part. AK50 ?
Yep, we machined the most tight tolerances parts for him
@@TITANSofCNC you guys are really awesome! I'm well past my prime, but I have shared a ton of your videos with my youngest son. Hope he will get the hint!
Grand Rising TITAN'S.....
This is why Eye, I Subscribed...
You folk's invoke Creative expression.
Im working with Siemens and flexium
Can you share what tool and machine was used for the OD splines? TIA 😊
Call my grandma for advice, she knows all about broaches
I am just realizing that you still use the imperial system to make all these machine settings. A system based on variables to do some basic measurements like the weight of witches, whether to burn them or not and for farmers and retailers to sell their groceries because there was nothing else. It is like the English driving right handed and have to use their left hand for the center controles settings, like a self created handicap. So I have even more respect for the nice things you are creating and showing us.
I think driving right side is the way to go.
A volver a Empezar un golpe le quita el glamour. Lo bueno que sera mas rapido ya lo hiciste una vez
Teasing us with old footage.
Just make your own "key" cutter by necking down a normal end mill on the grinder. I do it all the time.
I appreciate what you guys did to machine this part. It was a difficult part, but why did you just reupload a shortened version of video you guys released months ago? Did you think that not enough people would notice? In that case you were right. However it still just rubs me the wrong way to just reupload something you guys already did. Do more creative stuff like the jade endmill that was really creative and interesting.
I wish I can machine these
You guys haven’t done any additive stuff for a while?
More coming soon. Also have a Binder Jetting Printer on order for. Markforged.
Dear Sir ! If you don't mind can I ask you a question that how can I will reach in your factory for training and in your country if there is training college of CNC machines which gives training for students and sponsor the Visa process.i have a knowledge of CNC programming And CNC turning machine .And I want further training in your country because in Balouchistan there is no training center.Kindly can you tell me about the training institute which can sponsor Visa and gives the training of CNC machines..@@TITANSofCNC
Nice
12:00 Accidents Happen
Lmao 🤣
Hey Titans i am from germany i love high speed work have you a Job for me
And work with Alpha Cam from Aachen germany
I did not see that 😂
I have a little AK project. Can y’all help make it happen ? If so let me know thank you.
11:56 🤣
I have a little project. Can y’all help make it happen ? If so let me know thank you.
You so funny 🤬🤬🤬🤬🤬
Mister butter fingers ❤
Just saying
That's called lazy programming. When you can use shorter tools ;)
12:00
I did almost the exact same thing but the even bigger problem was that it wasnt even a nice part that I made... I was just admiring the insane work of one of my coworkers I've never been more embarassed at work than that and never been as sorry - I was able to fix the dents but GOD DAMN I hated myself
Jessie, stop breaking stuff! :)
I have a little AK project. Can y’all help make it happen ? If so let me know thank you.