How to Replace a Rear Differential Pinion Seal - Stop Leak (Ford Mustang F150 Ranger Expedition)
Vložit
- čas přidán 4. 04. 2020
- How to Replace a Rear Differential Pinion Seal - Stop Leak (Ford Mustang F150 Ranger Expedition) - Mustang GT 2003 in the video but same principles apply on almost any rear wheel drive, 4wd, awd or 4x4! See tools and parts below!
Gear oil:
Lucas 10122 75/140 Synthetic Gear Oil - 1 Gallon 75w140: amzn.to/39nObv7
Valvoline High Performance SAE 80W-90 GL-5 Conventional Gear Oil - 1 Gallon: amzn.to/2ybvwFY
Tools and parts:
Timken 3604 Pinion Seal: amzn.to/2xKyRM5
6" Gear Puller: amzn.to/2JHDJEx
12-Point Socket Set: amzn.to/2R6SAMT
Harmonic Balancer Removal Kit: amzn.to/2V3MCgY
Removable Locktite: amzn.to/2wePbEx
27mm Socket - 6 Point - 1/2 Drive: amzn.to/2yBB7pt
Fluid pump (cheap and good): amzn.to/3bBxX3i
Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 3.35 oz. Tube: amzn.to/3burJSy
6 Flexible Plastic Scrapers: amzn.to/2UsCqiU
White Paint Marker: amzn.to/2xLvcOf
Misc Tools:
GreatNeck BB18 1/2 Drive 18 Inch Breaker Bar (Cheap and good!!): amzn.to/2p7LOeX
Large metric socket set, includes 34" and more (Good quality!): amzn.to/32Ive3Z
Metric Wrench Set 8mm - 22mm: amzn.to/2xQn3ot
Socket Set 123pc Metric and Imperial - Good Quality: amzn.to/2NhqhL9
TEKTON 4966 3/8-Inch Drive Impact Extension Bar Set, Cr-V, 3-Piece: amzn.to/3byEkEo
Helper Tools:
Cheap 3 ton car jack stands: amzn.to/2B200bL
Cheap 2 ton jack: amzn.to/2IJggT8
Impacts:
AIR - AIRCAT 1150 "Killer Torque" 1/2-Inch (1,295 Feet-pounds (ft-lb) of loosening torque and Max. Torque 900 ft-lbs): amzn.to/2IQTCYJ
BATTERY - Milwaukee 2767-20 M18 Fuel High Torque 1/2-Inch (1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque.): amzn.to/33k3wf0
WATCH THE OTHER VIDEOS ON MY CHANNEL!!! I REPLACE: TIE RODS, LOWER BALL JOINTS, CV AXLES, SWAY BAR LINKS AND MORE!!!
SUBSCRIBE FOR MORE!
The car in the video is a Mustang GT 2003. However, the procedures shown in the video will apply to most vehicles and applications.
Video Title: How to Replace a Rear Differential Pinion Seal - Stop Leak (Ford Mustang F150 Ranger Expedition)
Video File Created Date: Saturday, April 4, 2020 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
-- Video uploaded and managed using CZcams Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your CZcams videos offline... Then upload!
-- ginkosolutions.com/youtube-bul...
-- GinkoSolutions.com
Video Tags:
how to replace, rear, differential, pinion seal, differential leak, ford, mustang, timken 3604, pinion seal replacement, pinion seal replacement ford f150, pinion seal replacement mustang, pinion seal replacement jeep, pinion seal leak, pinion seal ford 9 inch, pinion seal removal, pinion seal replacement ford ranger, pinion seal installer, pinion seal f150, how to replace a differential pinion seal, rear differential pinion seal, differential pinion seal, ford differential - Auta a dopravní prostředky
Like and subscribe for more! All parts, tools and more information in the video description.
If this video helped you, please support the channel by clicking "Thanks"!
We also have memberships to our channel with great perks! czcams.com/channels/0HkS2-1Tk1ULQJj3uGbjdw.htmljoin
Thanks for watching!
Thanks for a great step by step video, mine is leaking on my 06 gt , going to replace it and put on a new suspension kit next week
Thanks for showing how to do this job. I have a leaky seal on my 2000 Gt. I’m going to fix mine in a couple of weeks.
Great! Please like and sub if it helped! Thanks
TutorialGenius.com
Of course! You couldn’t of made this job more clearer. Thanks again.
Great video! Love the attention to detail. Subscribed
Great! Please like and sub if it helped! Thanks
Great DIY video. Mine is leaking in my S550 and I’m sure it’s a very similar procedure. Will go to Ford to see if they will powertrain warranty it, but might be denied do to modifications. If I get denied, then will do it myself. Again I appreciate the very good DIY 👍
Great video
Great video. I'm going to do this job and feel much better now I watched you do it. Ford 9 inch rear end, hope its the same or similar.
Never mind, its an 8.8. Even better.
Great video.. thanks 👍
No problem 👍
Fantastic video, looks like you have water contamination in the gear oil: is the vent tube clear and the other seals good, water is getting in somehow...
Thanks for this informative video. My car has 2 leaks in the back axel that’s been so saturated for so long the yoke is warped & also needs replaced.
You're welcome! Please like and sub if it helped! Thanks
sooooooo if you dont mark your drive shaft...... how do you know if its not were its supposed to be? i removed my drive shaft when i was doing my clutch swap and instead of marking it i just put it down the same way it was and tried to get it back up afterward, If its not were its supposed to go where could i take it to get it back in balance?
Yes, you could balance it, or, you could drive and see how it feels. If there is vibration, you know its x degrees off.
I hope you will subscribe to me soon!
My drive shaft isn't coming off from that end? Do I need to remove it all?
Did you get it? I hope you will subscribe to me soon!
I change mine now my diff it's making a noise only when I slow down. Any tips how to fix the problem 7.5 diff
When slowing: worn spider gears/clutches or incorrect/poor lubrication.
@@TutorialGenius you think maybe I didn't tighten enough the flage
What size is the bolt
Which one? haha!
Mine has a weird circle spring
That's interesting! I'm sure the same principle applies either way!
Seal isn't going in tried all methods
DId you get it? I hope you will subscribe to me soon!
Great video
Thank you! :) I hope you will subscribe to me soon!