STC-3008 dual temperature controller
Vložit
- čas přidán 20. 05. 2019
- More info about STC-3008 temperature controller:
usefulldata.com/stc-3008-dual...
Setting method: Start value lower as stop value (program automatically determines working mode is heating mode)
Setting method: Start value higher as stop value (the program automatically determines the working mode is cooling mode) - Věda a technologie
Great, Thank you. Captions are great but some audio (voice) would be even better.
When you Like use both to cool or both to Heat.. try to play by invert high level temp and Low Level temp of each Channel. It works !
Hi, I want to use both to heat but I dont understand what you said. Can you explain better for me? Thanks!
I think he means if the low level temp is set higher than the high level temp, then the controller keeps the fan/heater within a very narrow boundary?
I have a water solar panels on the roof top and geyser tank at the bottom, using in-line pump to circulate the water during the day and off in the night can I use this temperature controller please advise thanks 😊
Can I use it so that it only activates when I go out of a specific temperature range?
sensor 1 < 10 degrees will activate the 1 relay
sensor 2 > 40 degrees activates the 2 relay
Can we use to control heat pump machine? For swimming pool water heating purpose
Hey guys and girls. We need to be clear. Surely, this is a thermostatic "relay" device. So, it has two sets of controls (upper and lower temp switching) each for 2 relays (connecters 7->8, connectors 9->10) (Max. 220V AC to a heater, Max. 220V AC to a fan, connectors numbered 7 and 8, 9 and 10). YOU MUST NOT PUT LIVE AND NEUTRAL INTO THE CONNECTORS. The relay only switches through like a normal single pole light switch!
The connectors 1 and 2 (power supply) must be 12V DC (A battery should be enough to power the device, the relays and the LCD display.
The connectors 3 and 4 (activating a heating element or fan) will be the low temp sensor, the connectors 5 and 6 will be the high temperature sensor (activating acooling fan or refrigeration unit).
This device must only switch a single wire to each unit. CONNECTING both wires (e.g. LIVE AND NEUTRAL) will damage or destroy the device - and presents a fire or electrocution hazard!
It would be great to hear back from people to either confirm or deny my analysis.
Thank you.
Hope to hear back from you.
What is the difference between the bule and red digital
Can you please help me how to connect it to my home made incubator ?
كيفية تركيب الاسلاك
لدي نفس الجهاز v 12
هل يشتغل علي 220 v
Salve, ho lo stesso apparecchio alimentato a 12v. E possibile su una uscita di un relè alimentare qualcosa a 220v o bisogna comunque collegarli prima un inverter di tensione? Ho bisogno di alimentare a 220v un riscaldatore per acquario che va a 220v, mentre per raffreddare uso ventole a 12v. Grazie anticipatamente.
how do you wire it?
hello great video, do you know if it is possible to set both outputs to heat? or does out 1 heat and out 2 cool?
Is sensor 1 red or blue display?
Добрый день.Если питание 12 вольт,где + и -? Нигде найти не могу,если кто знает,подскажите.
i cant get mine to deliver output. is there anything special one must do with the wiring
The is just a thermostatically controlled switch. By itself it doesn't output electricity. It is designed to complete a circuit or in this case two circuits based on temp.
As it's 12 dc , does it require 12dc power adaptor or can be connected directly to power.??
if you have 12V can you only power adapter or battery , dont not plug to 110V or 220V Ac power
Can you power it with 12v 18watts solar panel
Will this controller plug into 220 AC to temperature switch and control a 12v 100w ceramic motorhome heater?
Thanks very much.
OK. I think I've answered my own question. This controller DOES NOT have a 220V AC to 12V TRANSFORMER inside. It can only act as an ON/OFF relay connected by a single pole (probably LIVE, not NEUTRAL) of AC devices of 110V220V or AC devices of 12V or 24V!
Can you change the cooling function to a heating function?
This paremeter temperature controller change automaticaly by values on start temperature and stop temperature more info is in link on descriptions
COMO LIGA OS CABOS?
what about ZFX-ST3008
Is it possible to put the red temperature in the same mode as the blue temperature!?
yes red and blue can heating or cooling
Keduanya bisa buat pendinginan gk kak
Может кто знает, почему показания не стоят на одной величине, а бегает на 8-5 показаний то в плюс то в минус. Короче не держится на одном значении. Почему?
Спасибо!
Como faz pra ligar os fios atrás ?
Conseguiu a resposta em algum lugar ?
It is possible calibrate the temperature of the two probes when the value are wrong?
Yes i thnik can you calibrate , check manual link
Odwrotnie, czerwony chłodzi a niebieski grzeje.
Up button is the ON set temp... Down is the OFF set temp.
So you could have two heating functions?
Yes can you make two heating function
@@powersblog1 how would i do this?
@@powersblog1 how do I wire it?
this is manual usefulldata.com/stc-3008-dual-temperature-controller/
Язык зачем?
Can you use it for eggs incubation please
yes can use start temperature 36C and stop termperature 37C
I think there is 3802 or omething for that
come si accende
Quando for fazer um vídeo fale ninguem e surdo não
the temperature can not be calibrated on this one, right?
answering my own question: you press up and down and hold them to enter calibration.
He shows it from 3:55
I can also set both to cool
OK. But the same surely does not apply to heating - otherwise the device would never switch off. Surely, one thermostat sensor must be a minimum temperature ON, the other a maximum temperature OFF switch.
I can see how it doesn't matter for a cooling fan. But for a heating fan that would seem risky. Can you please clarify?
Thanks.
Как подключить нагрузку?
Агар Дэ будь добр подскажи какое ?
Can you show to us how to wire properly
no muestran cono se instalan los cables
Vc não fala nada
Hagan un vídeo en español por favor
Malo malo a pesimo
What’s wrong with your voice?
they most likely don't speak English, that's why? One can see in the translation "muss" instead of "must". Not everyone on the planet are anglophiles lol.