Thank you Anthony for posting these videos on the MKS-DLC32 v2.1 board! I am in the process of upgrading my K40 with this board and for me it has been a real slog. I am thinking of using FluidNC and your detailed videos have been very helpful to my understanding of the work that is required. They have given me a much better grasp of the board and FluidNC software.
Thanks for the video! I am fully supporting FluidNC, the 6 axis Universal CNC board and Bart Dring's work! Great stuff. Let's help get the DIY CNC community behind this concept.
Hey man, thanks a lot for sharing those videos! I am trying to run a core XY pen plotter with 2 TMC2209 and a MKS dlc32 2.1 but I am having some trouble with the servo to lift the pen up and down.
Hello, I have the same card. The Z axis is off and I can't move the motor. When I try to update the software to solve the problem, it does not see the card. Any idea how to fix the problem?
I have gone from standard grbl to fluid nc but I notice a change in the management of laser power... for engraving on methacrylate I previously used 200mm/sec 20 power and now I have to use only 5 power because with 20 it perforates the material, It seems to me that power management is not delicate... Can someone tell me how to solve this please.
Hi Anthony! Please tell me, what exactly makes FluidNC better for CNC than the default firmware? I want to build a small CNC milling machine for a hobby, and am wondering if I should reinstall the board firmware.
Thank you Anthony for posting these videos on the MKS-DLC32 v2.1 board! I am in the process of upgrading my K40 with this board and for me it has been a real slog. I am thinking of using FluidNC and your detailed videos have been very helpful to my understanding of the work that is required. They have given me a much better grasp of the board and FluidNC software.
Thanks for the video! I am fully supporting FluidNC, the 6 axis Universal CNC board and Bart Dring's work! Great stuff. Let's help get the DIY CNC community behind this concept.
I think this is the most helpful video about mks
Hey man, thanks a lot for sharing those videos! I am trying to run a core XY pen plotter with 2 TMC2209 and a MKS dlc32 2.1 but I am having some trouble with the servo to lift the pen up and down.
Hello, I have the same card. The Z axis is off and I can't move the motor. When I try to update the software to solve the problem, it does not see the card. Any idea how to fix the problem?
I've discovered that the ESP32 only needs pin 0 to be grounded the first time it is programmed, thereafter it can be programmed without grounding.
I have gone from standard grbl to fluid nc but I notice a change in the management of laser power... for engraving on methacrylate I previously used 200mm/sec 20 power and now I have to use only 5 power because with 20 it perforates the material, It seems to me that power management is not delicate... Can someone tell me how to solve this please.
Hi Anthony! Please tell me, what exactly makes FluidNC better for CNC than the default firmware? I want to build a small CNC milling machine for a hobby, and am wondering if I should reinstall the board firmware.
Are this board conpatible with ortur laser master 2??
Hi Could you help me monitoring a cnc using fluidNC?
Good video thank's for it. It's possible to get the Display to work?
A nice video. Can you tell me which board you used? The MKS DLC32 version 2.0 or 2.1? I can not see it in the video.
Will you still make videos of this topic (fluidnc, esp32, mks dlc32 2.1)?
È possibile usarla su cnc 3018 con fresa è non con il laser
Thanks for this great tutorial.
Hi, Nice video and well explained. I bought this board recently too with the same version. btw, what advantages of fluidNC over MKS default firmware?
Could this work for Plasma CNC table?
Mam problemy plik.yaml otwiera się jako plik tekstowy nie umiem wgrać wykasowane mam wszystko co robić jak zmienić
How hard would it be to use external stepper drives like Geckos?
Nice just ordered this board for laser engraver