This is a good video for a novice or expert for the installation of the law folding stock adapter. After watching the entire video I believe you will have no problem installing the law tactical folder.
I've got a Law Tactical AR folding stock adapter Gen 3-M still BNIB. I'm saving it for the 300aac 10.5" PDW im building next month. Currently throwing together a 4.5" AR9 that I've been tinkering with. Was going to use the law tactical on it initially. Then I stumbled onto a removable RAB-AD9 detachable buffer tube assembly adapter, and ordered it for the 9. Keep the footprint down as low as I can fttb.
Thanks, I appreciate that! Check out my channel, I may have some other install videos that may help you! Hoping I could earn your subscribe thanks again! 👍🏽
Yes, I did later on. I realized that screw was there after I made the video. So yeah, make sure you tighten that set screw. it’s just an extra set screw to ensure tightness. Thanks for pointing that out. Make sure to tighten it.
Could you tell me what the overall length of your weapon is while folded? I'm building a similar rifle and am also trying to figure out the correct size backpack to get. Thx!
@@black84z28camaro not sure what your saying. My weapon is working no issues. Maybe I have a different lower receiver than yours. Idk. I have an aero precision M4E1.
Hello from T-Town! I’ve been thinking of putting together this exact setup and stumbled across your video. Have you had a chance to shoot it with the folder? Just curious if you’ve had any issues. Thanks and great video!
Thank you I appreciate your feedback! And yes I’ve had a chance to shoot with this folder alot! Absolutely no issues so far! Although I don’t use a normal buffer and spring that you see in this video! I actually use the Geissele super 42 buffer and spring setup in all my guns!
That is because I have a different lower than you. my lower has a set screw for that pin so mine doesn’t ever come out unless I manually unscrew it most lowers like yours will have that and will pop out. Just make sure to put it back in.
Just mine together watching you video but the only issue with mine is the bolt carrier won’t fully pull back due to hitting the release button on the adapter. So imma take it apart and see what’s up
Yeah idk I took it apart again and put it right back together and it seems to be working just fine now. Bolt carrier is charging back fully now 👍🏽 I guess I just to break it in I guess but it’s working now 🙏🏽
I'm not sure if this would be legal in california. I got a 7.5 in barrel ar pistol with blade stabilizing brace. Not rim fired and doesn't have a fixed mag. Would love to know if it's legal or not before I do anything.
Tbh I’m not sure. I don’t know the restrictions for cali. If the website won’t ship the item to you then probably it’s restricted. If you’re able to get it shipped still then it’s probably ok. That’s my guess.
@@Redeemed_Team Thats my original guess too but California being shady, they probably made it legal to own the product, but illegal to install the product.
They make the tolerances tight on purpose to keep it nice and snug which I like. Great quality tho and it’s probably the best folding adapter in the market. Hands down. Enjoy.
I have the aero precision M4E1 lower receiver. They are built different. The takedown spring is still in there. It never came out because a small screw is holding it in place. So that’s why you didn’t see anything because it never came out. Look up M4E1 lower on the aero precision CZcams page if your still curious. Pretty cool design.
Since you need the bolt extension this isn’t compatible with a 9mm blowback AR since it has the extra weight in the back of the bolt. I didn’t find a solution for that yet
That’s a good question I never had that issue. I’m not sure why your Ruger is doing that my thoughts are maybe the retention spring is sitting too proud. I would have to look at it and see it for myself to really help you better.
@Redeemed_Team I figured it out after I asked the question. This kit comes with an additional pin and spring. I figured I could use that one and if it broke I would still have my original. it turns out that pin is too high and that is what the extension runs into. So I installed my Ruger pin and spring and it works fine. Thanks for the reply
It’s called a gun smith hammer thingy lol 😂 jk I believe it’s called an armorers wrench. I got it at sportsman warehouse! They sell a lot of these on Amazon too I believe.
I think this is the best tutorial for new gun owners. And I have seen many ones on youtube. Thank you.
Thanks for your feedback 🙏🏽
I agree
I’m sure a lot of people watching this were confused as to why their castle nut didn’t loosen with 6 ounces of pressure like yours did haha
😅😂🤣🤣 yeah sorry mine was already broke loose haha
This is a good video for a novice or expert for the installation of the law folding stock adapter. After watching the entire video I believe you will have no problem installing the law tactical folder.
Thanks for the feedback John!! Much appreciated!
Thanks for the video! Super helpful. I have one of these on the way.
No problem! Glad this helped!
👍great video your explanations were on point and easy to understand. Great job, thank you.
Thank you 🙏🏽
This is a great video on the install. One of the best I've seen.
Thank you feel free to check out some of my other install videos. Have a blessed day.!
Great illustration , thank you. I'm gonna try to install one now.
Thank you
This is best video I've seen on how to instol. ✌
Thank you! I appreciate it! I’m glad this helped! ❤️
Thank you for the video, very helpful!
No problem!
thank you very good job helping us
Excellent tutorial. Much obliged
Thanks for tuning in!
Excellent how-to! Might try this on my DDM4 PDW blackout. Just hope it works! Thanks bud
It will work! 👍🏽
Awesome. thank you!
Great video helps me to install mine
Glad this helped! 🙏🏽
Great job. Thanks
Thanks for watching !
good job, thanks
Your vid was perfect 👌👍
Thanks!
I've got a Law Tactical AR folding stock adapter Gen 3-M still BNIB. I'm saving it for the 300aac 10.5" PDW im building next month. Currently throwing together a 4.5" AR9 that I've been tinkering with. Was going to use the law tactical on it initially. Then I stumbled onto a removable RAB-AD9 detachable buffer tube assembly adapter, and ordered it for the 9. Keep the footprint down as low as I can fttb.
Sounds dope! 💯
decent voice over, and good camera view. saving for later.
Thanks man 🙏🏽
Great video. You did a whole lot better than brownsnell.
Thanks, I appreciate that! Check out my channel, I may have some other install videos that may help you! Hoping I could earn your subscribe thanks again! 👍🏽
Thank you
👍🏼❤️
Great vid. Have you had any rusting issues w the Law Tac?
I haven’t. I do take really good care of it though.
Where does the skinny spring that went into the buffer?
This was a nice video and all, but please stop giving me the ASMR treatment while you're at it lol
Lol
What’s the length of your upper? 11.5? 10.5? 😅 great video and like your setup simple yet functional
Thanks 👍🏽 and it’s 11.5
You press the butt inn.
Did you tighten the set screw on the receiver side of the Law folder? I didn't see that.
Yes, I did later on. I realized that screw was there after I made the video. So yeah, make sure you tighten that set screw. it’s just an extra set screw to ensure tightness. Thanks for pointing that out. Make sure to tighten it.
Could you tell me what the overall length of your weapon is while folded? I'm building a similar rifle and am also trying to figure out the correct size backpack to get. Thx!
I don’t know off the top of my head. Definitely gonna have to take the suppressor off still for it to fit in any standard size backpack.
You didn't put in the spring and detent for the rear take down pin?
Never took it out
The one on the rear face should have popped out when you removed the rear plate. If it didn't pop out your spring and detent ,just be fucked up
@@black84z28camaro not sure what your saying. My weapon is working no issues. Maybe I have a different lower receiver than yours. Idk. I have an aero precision M4E1.
All my m4e1s spring pokes out the rear when u remove the rear plate
@@black84z28camaro thanks I’ll take a look!
Wheres your rear takedown detent spring? Oh you must have one of those lowers with the capture screw.
Exactly. Captured screw.
Hello from T-Town! I’ve been thinking of putting together this exact setup and stumbled across your video.
Have you had a chance to shoot it with the folder? Just curious if you’ve had any issues.
Thanks and great video!
Thank you I appreciate your feedback! And yes I’ve had a chance to shoot with this folder alot! Absolutely no issues so far! Although I don’t use a normal buffer and spring that you see in this video! I actually use the Geissele super 42 buffer and spring setup in all my guns!
What is the brand of that castle nut removal wrench and where can I get one?
Armorers master wrench. Made by Real Avid.
Why do I have a pin in my back take down pin? I have that skinny spring. I didn’t see anywhere where you put it back?
That is because I have a different lower than you. my lower has a set screw for that pin so mine doesn’t ever come out unless I manually unscrew it most lowers like yours will have that and will pop out. Just make sure to put it back in.
Wheres the rear takedown pin spring? Also, isnt there a set screw on the side above the button to lock in the inner collar?
My rear take down pin is held in place by a set screw. So it never came out. M4E1 lowers from aero precision have this feature.
@@Redeemed_Team it's weird cus after I commented I then saw another install video and he indicated aero precision lowers have captured springs.
@@EnergizerTX yes sir that is correct
@@Redeemed_Team does your law folder not have a set screw above the button? I was just looking to see if people put loctite on it.
@@EnergizerTX I’ll have to take another look at it when I get home. If it does I don’t remember using any lock tite on it.
Just mine together watching you video but the only issue with mine is the bolt carrier won’t fully pull back due to hitting the release button on the adapter. So imma take it apart and see what’s up
Yeah that’s interesting why it’s doing that. I hope you get it figured out man! The law tactical should be compatible with most ar’s.
Yeah idk I took it apart again and put it right back together and it seems to be working just fine now. Bolt carrier is charging back fully now 👍🏽 I guess I just to break it in I guess but it’s working now 🙏🏽
I'm not sure if this would be legal in california. I got a 7.5 in barrel ar pistol with blade stabilizing brace. Not rim fired and doesn't have a fixed mag. Would love to know if it's legal or not before I do anything.
Tbh I’m not sure. I don’t know the restrictions for cali. If the website won’t ship the item to you then probably it’s restricted. If you’re able to get it shipped still then it’s probably ok. That’s my guess.
@@Redeemed_Team Thats my original guess too but California being shady, they probably made it legal to own the product, but illegal to install the product.
How long did it take to break in that release button? I Just installed one and it's just really tough to press.
Not long at all. Couple weeks of using it did the trick. Button is nice and smooth now.
They make the tolerances tight on purpose to keep it nice and snug which I like. Great quality tho and it’s probably the best folding adapter in the market. Hands down. Enjoy.
What about the takedown spring & detent? Where did it go?
I have the aero precision M4E1 lower receiver. They are built different. The takedown spring is still in there. It never came out because a small screw is holding it in place. So that’s why you didn’t see anything because it never came out. Look up M4E1 lower on the aero precision CZcams page if your still curious. Pretty cool design.
Since you need the bolt extension this isn’t compatible with a 9mm blowback AR since it has the extra weight in the back of the bolt. I didn’t find a solution for that yet
Good observation. Yes I’m not sure about 9mm compatibility
We’re did you get your lock rail
Lock rail ? Like mlok rail ? Bcm
Where can i get that castle nut wrench
Any gun store or sportsman warehouse
Amazon too
What would I need to do in order to take the castle nut off if it’s been staked in, is it okay to remove it if it’s been staked?
Yeah a lot of people remove them you just hammer it loose
I’ve never done it but I’ve seen others do it
@@Redeemed_Team ahh gotcha, just saw a video of someone doing it.
I was just thinking about how that may destroy the lower haha
It looks easy enough
Why is my carrier extension running into the buffer retaining pin? I can't pull the charging handle back and more than an inch. Ruger sr556
That’s a good question I never had that issue. I’m not sure why your Ruger is doing that my thoughts are maybe the retention spring is sitting too proud. I would have to look at it and see it for myself to really help you better.
@Redeemed_Team I figured it out after I asked the question. This kit comes with an additional pin and spring. I figured I could use that one and if it broke I would still have my original. it turns out that pin is too high and that is what the extension runs into. So I installed my Ruger pin and spring and it works fine. Thanks for the reply
@@jdoginc awesome man! Yeah I had a feeling the retention pin was causing it! Glad you figure it out! God Bless!
did you forget to add a spring to buffer tube?
Nope 👍🏼
would this work on a JR carbine??
Not entirely sure! What is a JR carbine?
@@Redeemed_Team A PCC
@@visionplayer10 honestly I’m not sure 🤔 might want to Google that one? I know it will work on any standard AR 15 platform.
What’s the name of the tool next to the adapter?
It’s called a gun smith hammer thingy lol 😂 jk I believe it’s called an armorers wrench. I got it at sportsman warehouse! They sell a lot of these on Amazon too I believe.
@@Redeemed_Team thank you so much 🙏🏽
I wonder how much that cost b
I think like 150$ I don’t remember
Where can I purchase that tool
I got mine from Amazon
@@Redeemed_Team what’s is it called . Do you have a link? Thanks
@@JK-yh2po vortex torque wrench. And no I don’t have the link anymore but just type in vortex torque wrench and you will see it.
Why would you repeatedly call it a stock
Brace, stock, green jacket, gold jacket lol the adapter works with anything that has a buffer tube.