Tamiya Tt02 build
Vložit
- čas přidán 6. 09. 2024
- INdoor carpet RC car racing is at its best when all cars are equal and driver ability is what determins the winner and not the guy with the deepest pockets
In this video Mark builds his “race winning” Tamiya TT02 in preparation for the 2nd CZcams race.
But who will win? Will it be:
@PopalongRC ?
@RCKickschannel ?
@ClairesRCs ?
@KevinTalbotTV ?
@noahsrcs1808 ?
@Vinnyschannel or
@HardcoreRC ?
Indoor vs outdoor set up guide - • RC Car speed secrets a...
Keep an eye out on the channel to find out!!
I just build my first one. I had a great time! As a noob im really really happy with the tt02. Maybe some upgrades in the future
Fingers crossed you take the crown 🤞 your back to racing your type of cars, so you should have the racers edge 😁
Cheers RL👍👍
Oh you have a mini I love those little things
You need JIS screwdriver's being a japanese product.
Carl has a set … must get some myself
Yes but i tried several JIS screwdrivers and wasnt happy with the result. Is there any good screwdriver brand that delivers them in high quality?
I just swapped to hex screws. Dirt cheap from accu, as the rc specific ones can be pricy. Unless you want titanium etc the cheap stuff will be fine
I agree the Mini is cool and should be made available again. ☺
Bring back the M03
@@PopalongRC ABSOLUTELY! 👍😲
Good luck for the race. I actually like all of you so I'm crossing fingers for everyone 😅
Cheers Alex, they are a good bunch, I rekon it’ll be a good laugh👍
I enjoyed your build video. I think there are some good tips in there. I think the race will be fun. TT02 classes are becoming more popular in the states. Having been in a few TT02 races, I would suggest that someone bring a few spare parts. Sometimes the front uprights can be weak. Good luck in the upcoming race.
Cheers buddy
Not sure we plan to have any spares
@@PopalongRC I am sure you all are very clean drivers. But, the pipes, walls and hard hits can take a toll. These cars are not as durable as off road cars. I think it would be bad if one or more drivers were taken out in one or two laps. This is just a suggestion.
If exact shell then might be pre cut therefore very easy
Tamiya kits are always fun. I only built two one for me, and one for my grandfather, only differences between ours is that mine has a 32$ servo, an onyx motor and ESC brushless setup, and metal bearings. Now I’m working on an Xpress FT1S fwd chassis for racing. Enjoyed the build video, you did a great job!
Cheers Dragon
The xpress is a great car too
Raced against it at the nationals last week
@@PopalongRC You already know I'm gonna try racing the nationals when I get better with it, lol. It'll be so satisfying to get it all finished. Also if you haven't already, there's this really cool track down here in Florida, Coral Springs RC track, it's a real great place and it'd be cool to see us show up on the channel! I feel like you should also go over different classes to race if you haven't. I'm not new to the channel, but I'm also not a seasoned viewer, so, I'm not really keen on what you've posted already but keep posting! It's really helpful that you make these videos!
I do love a build video, even if it's for the TT-02😜 Anyway, good luck with the race!!
Cheers Barry👍
OUTSTANDING,,,,,,
Cheers Zoe
🍻😎
The Tamiya set is one of the best RC tool purchases I've ever made.
Important to have some nice tools
Love build videos and this was great! 👍
Cheers Paul
My experience is that laying stuff all over a table makes it harder. I just put the contents of the bags in an ice cream tub and cracked on with the sprue 's lying in the box.
Depends on how much space you have to spread out … take away containers are essential
The MB-01 is coming out soon, should be cheap and good for the M-class. No idea why they should re-release the M03 when the M05 was better at the same price? The MB01 would hopefully be a really good M-class base for a M-class raceclass. The m07 and m08 apparently kinda killed the tamiya M-class, as it made a cheap class require that you buy a 200+ euro chassis to even be cmopetetive. Guess we'll see how it goes.
Flatheads work, but just get a set of JIS(japanese industry standard) screwdrivers for tamiya screws. You can get them as screw bits, so doesnt need to be ultra expensive.
TT-02 looks lovely. :)
The youtuber race should be intresting as everyone drives the same cars(hopefully no shenanigans). 😆
The MB 01 sounds interesting, the m03 will always have a place in my RC collection if only for nostalgia👍
@@PopalongRC I have similar feelings for the M02 :D But I think a single chassis(mb01) car that works for both front and rear wheel drive out of the box, sounds like tamiya might be on to something, espessially if it holds to the projected similar pricepoint as the m05. :)
We will have a look.
Nice vid,wonder how many TT 01s and TT 02’s Tamiya have sold worldwide?must be a huge number,ideal for a level playing field in your upcoming race,have fun and you must be in with a shout of winning!
Let’s hope we can take the win
But Vinnie is a seasoned racer
Nah him and that talbot geezer are pussies😂🤣I couldn’t beat a one eyed donkey but you clearly are both good solid racers,just keep a close eye Kev Talbot not cheating,like having a brushless motor hidden in a torque tuned can!and no small army of fans there setting up his car this time🤣…..only joking,all fun.
Oh one non related question,have popalong been sent or likely to be one of those new Ftx apache cars?for first time in many a long year might pick something up to mess around with and was wondering if the apache is better than the zorro? just fancy 1/10 offroad
👍👍
Cheers Martin
Tamiya need to upgrade all their popular chassis and release them with cool bodies like the mini
🤞🏻
And rere the king cab so we can race 😀🤞🏻
Do you have a video showing how to mount a body for the first time on these Tamiya TT-02s?
I have footage but not done video yet
Will get one out soon
@@PopalongRC excellent, because I have a body exactly like shown here in the video coming from germany and I don't have a clue how to tackle the installation on my TT-02😄, looking forward for your videos, as always great.
I think the screw heads are called JIS heads (Japanese Industrial Standard) & you need a proper JIS head driver.?
I might be wrong though..
Cheers for the info Alan👍
These look brilliant. I'm nearly going to buy. However I also have in mind the lc racing 10th rally car but please correct me, I don't think you have made a running video of it, how do they compare please. Other than cost
Like the way the diffs assemble. Is there a lot of general slop, more than the TT01-e?
I might bring it to LB on Tuesday for a shakedown👍, not sure I’ll handle the sheer speed 😂
If you are at LB Tuesday I’ll bring you some spares. Did you shim the suspension? I had to remortgage my house to buy all the shims I needed to reduce slop! 😂
No built box stock … no mods
It’s going to be interesting to see this race. I use the term race loosely! Running these on carpet is a disaster. Mind you running a Tamiya TT02 in general is a disaster hahahaha. With these on stock gearing and 17.5 blinky they go that slowly you don’t need to use the brake on a carpet track.
Who said anything about 17.5 brushless
We are silver can stock gearing
@@PopalongRC oh nooo haha torque tuned. Shame you can’t run them modified those front dog bone drives will be fun for you.
Keep it clean slow is fast … plan to avoid traffic
@@PopalongRC I’m rooting for you, please keep your elbows out when kevs near by 🤣
HHahahaha
How long start to finish do you think the build took? Did you complete it in 1 day?
You had to buy bearings on top?
Do they sell metal diffs and gears for these cars?
3hours if you know what you are doing
@@PopalongRC thanks. You actually did it a lot faster than I thought.
Atleast I know it can most probably be made in a day if I have a go lol
Enjoy it
@@PopalongRC thanks I definitely will do. Do you think the tt02b the neo scorcher buggy would be a similar build I fancy one of those but with some extra speed. Am just worried about the plastic gears etc and how durable they are.
Anyways keep up the good work looking forward to you next video!
Why don’t you go to the CMCRC track where in Ipswich there a buggy track and a touring car track
We will add it to the Popalong list for sure
That Audi shell has no rear grip ,drop sumthing with a spoiler on it ,and sloping front.a Porsche for instance maybe
I do have Tamiya shells with spoilers but wanna stay box stock for this race👍
Running a Porsche with spoiler against an Audi without might be called cheating
So is evryone running the audi shell? No AMG / Raikiri / GT40 or something? That would be stock as well....
That would not be as level a playfield
Why didn't you go with the original livery of Audi V8? Much better in my opinion keeping it retro.
do i need to buy anything else ? like mods or i can build it without them
For the CZcams race we ran stock
First upgrade is ball race for this car
Www.RCbearings.co.uk
Then next thing is oil filled shocks
Oil filled shock build Tamiya or Yeah racing
czcams.com/video/b56AlYX6MzU/video.html
There are lots of hop ups available
But many are not necessary
Kev Talbot beaten by a Tamiya - Hop up video
czcams.com/video/Q2V9bPHnvsg/video.html
What body is on the Tamiya tt01e?
Think it is the hpi nissan 350z nismo gt