@@somethingbutnot7217he have just buy a kit for build a mouse without the plastic, if you want you can project your personal pcb send it to pcbway chose the slavery option for solder the piece that you need on the pcb and then assemble it so its completally desined by you
Jesus Christ formed Eve not out of the rib of Adam, instead he printed her with a Bambulab and Bambu Pla Matte Black filament 1.75mm -> get your facts straight
Honestly i see the appeal, the amount of computer mice that break, wireless ones travel with you to meetings, home, your office, and it drops and breaks, being able to print a new plastic and keep the components that still work is great idea
Got a tip for you, maybe you already know but you can turn off the support around the object so you don't have to peel it off bc sometimes that gives the object sharp edges
@@davidlikestoprint What filament and print nozzle did you use? My stock settings on a P1S don't look anything like the upper shell here. I can't see layer lines or any of the expected artifacts on the top of your print.
That actually reminds me my grandmother was asking if I happen to have some extra mice lying around so this project kit for the mouse doesn't sound like a bad idea right now.
most people have a company they like (Logitech etc) but everyone has a different grip pref. clever peeps like this fella would earn good money by sending some sort of mould material for people to have custome grip shells created :)
@@Youngjackj I've printed more complex parts than that with zero support. Theres even a guy here on CZcams who does zero support 90° printing. Support material is wasteful, all you need is better management of your slicing software.
Because, the people want just "Print & Go" and BambuLab is particularly suitable for this. But hey, better than back then where many went with PVA, which is expensive support material. How to do to print smooth without support, requires a bit knownledge and experience.
It's depend on what you put inside. It can be insides from cheap China mouse or you can buy good parts. Also with skills 3d model can look like art. Seems you can use also expensive UF 3d printer.
no, you didn't make any point. a custom keyboard is more expensive than buying a shit keyboard, boom roasted all custom keyboards i've made my point. (except i haven't) there's no point in saying "oh this is more expensive than a prebuilt mouse!" yeah, it probably is? and what's your issue with that. especially considering this is someone else's money and time. not yours@@davstar
@@driftboard Okay fair enough, I found that building my own keyboard costed more in the end. I guess it does depend on the overall quality you’re going for.
That's so dope. Despite how cool this is, the whole time I was thinking to myself "plastic is so bad, and there are traces of micro plastic throughout the entire world".
pc people when they find out their mouse is prebuilt:
Still prebuilt pcb board!
@@309electronics5by that logic we Should not buy ''prebuilt'' motherboards
@@309electronics5and a gpu is prebuilt from the factory, tf is ur point?
@@MrToastyYThahahahahahahaha
@@MrToastyYTPc people realizing that custom gpu they made themselves contains prebuilt atoms:
How to 3d print a mouse:
Step 1: buy a mouse
No Its only the pcb
Lol what of course you can't just print the internals
Step 1: buy a shitty mouse
Step 2: 3d print case and assemble
And then you have a normal mouse
@@somethingbutnot7217he have just buy a kit for build a mouse without the plastic, if you want you can project your personal pcb send it to pcbway chose the slavery option for solder the piece that you need on the pcb and then assemble it so its completally desined by you
@@somethingbutnot7217 still shitty lol
Now I can just print myself a new mouse after a hard game of CS 2
That's a tantrum after a hard game of CS2
csgo player here
wanna play?
@@gameboyv1790 u say it to me ?
@@danulozabirko1628 yeah
Green and black combo looks cool!
Razer
Yeah I like
Ye ye I love Razer😭😂
3D print enthusiasts realizing their heart isn't 3D printed:
YET (context, they are 3d printing organs, even if it's not yet ready for medical use)
@@jani25654 oh thats true i forgot about that
From the moment I understood the weakness of my flesh, it disgusted me.
@@9767Music😂😂😂
the more we know
Jokes on you, I can 3d print myself a new one! A better one! A faster one!
Jokes aside, that mouse looks really cool
It's just a worse version of a Logitech G502
mid at best
Ya and probably feels awful.
@@daegan3505but be pretty lightweight tho lol
@@baconboy4058 most mouses weigh under 60grams nowadays anyway
Good for when you rage on shooters. You break the mouse, and then you print another one
hahahahaha
Just don't throw at the monitor
24 hour cooldown
I will try this 😂😂
Looks amazing!
Too bad it doesn't actually have a mouse click to it, looks awesome otherwise
Thank you 🙂
If you have those lever switches that home your 3d printer, they're similar to the ones in Logitech mice and have a satisfying click.
Doesn’t it function like a normal mouse?
@@enriqueamaya3883I raped your sister
Nah silent click is the best
3d printed mouse: 😊
3d printed maus: 💀
average war thunder player trauma
I think its a World of tanks trauma😅😂😂
I want my 3d printed medicinal nuclear powered aircraft carrier
mouse on gremany is maus
3d printed mauser
Friend: What kinda mouse you got?
Me: Yeezy Wireless
This would actually be rlly fun as you could 3d print any mouse design and add any art you want
Using a glow in the dark resin + adding a led light will make this more awesome. ✨🤜
*filament (this is fdm, resin is for sla)
What a beautiful quality of print ngl
@@enriqueamaya3883 shut up
@@enriqueamaya3883bro 💀
@-XenoCide15- jesus Christ is a 3d printer engineer now and he is the head developer of this printer bro
@@enriqueamaya3883did you find Jesus in Fortnite or sum bruh🤡😭
Jesus Christ formed Eve not out of the rib of Adam, instead he printed her with a Bambulab and Bambu Pla Matte Black filament 1.75mm -> get your facts straight
Honestly I don’t see a lot of people do this good job 👏
Honestly i see the appeal, the amount of computer mice that break, wireless ones travel with you to meetings, home, your office, and it drops and breaks, being able to print a new plastic and keep the components that still work is great idea
That looks so cool!
Nah bro just invented China home edition
Chinized his mouse
It looks cool good job dude!
Love the organic shapes, the mouse almost looks alive
That mouse’s design is so cool bro
Looks sick. Good work man👍🏻🤘🏻
That’s a very creative way to make your custom mouse. Looks cool.
So satisfying to use what was printed. Well done
60% support 40% mouse
You know anything about printing? Those support are hollow and probably like 5 or 10% support.
Not to mention that it'll look 💩 without enough support
Too cool!
Yes I agree 💯
Im a new subscriber
Got a tip for you, maybe you already know but you can turn off the support around the object so you don't have to peel it off bc sometimes that gives the object sharp edges
What setting do you print on man your stiff comes out clean i have to out mine on silent mode to get quality like that lol
I printed this on the standard speeds at the stock settings
What material are you using?
@@davidlikestoprint What filament and print nozzle did you use? My stock settings on a P1S don't look anything like the upper shell here. I can't see layer lines or any of the expected artifacts on the top of your print.
Nice, so we can decide on what color and material to print with!
Pls tell me what settings you use I really wanna make my 3D prints look way better
That actually reminds me my grandmother was asking if I happen to have some extra mice lying around so this project kit for the mouse doesn't sound like a bad idea right now.
Welldone if you wanted to 3d print mouse and assemble it why don't you go with rechargable battery option!
That’s just what came with this! I plan to add glass skates and a rechargeable battery!🙂
This is a kit from bambu, pretty sure adding a rechargeable battery would be pretty trivial though
Facts rechargeable battery option
@@davidlikestoprint Hello, can you please give me the files for printing the mouse
This actually very good anyone can design there own grip and textures fully customisable. Man you can start a company.😊
It's kit that you receive when you buy bambu lab A1. Everything is prepared you just print and assemble.
You should explore r/mousereview. People've been making much better, cooler and probably cheaper mice than this for a long time now
The spline mouse skin seems pretty dope
You should try to do one with said buttons that would be a good gaming mouse tbh and it’ll be cheap
most people have a company they like (Logitech etc) but everyone has a different grip pref. clever peeps like this fella would earn good money by sending some sort of mould material for people to have custome grip shells created :)
Bruh you need a 3D printer for that 💀
bro the mouse is so so good..
you can add some colourfull light inside the mouse
it will make the mouse toooooo cooler..
Wow, this is a really smooth print
I reckon this would be a cool idea if you wanted to gut a pre-existing mouse or print a repair part for one. Nice stuff 👍
Where can i find the 3d model?
Just search bambulab mouse stl
If you still need it i believe it's bambu labs' mouse, search for bambu labs mouse kit
where i can find this model pls?
First time I’ve seen this print where I actually thought it was cool and I want to do it now too, nice video! I’m ordering the kit!!
woou!! your work is amazing
Bro is going to print a full pc next 💀💀💀
Thats honestly a really good idea. That way you can get a mouse perfectly fit for your hand
ugly as f
Yoo! That's pretty sick! 😎👌🏻
If you break it, you can melt down the filament and reprint it.
What printer are you using?
looks like a bambu lab A1 mini
Looks better than magic mouse
I just got into 3d printing. How do you do supports likes that? Those seem way easier to take off
It would be cool if you could actually make a custom mouse with all the buttons exactly where you want them and fit your hand ergonomics.
Is it strong enough to withstand exactly 30 hits against a wall
I will never understand why people print something that doesn't need support, with support.
Well these are one of the kits with the new bamboo and I think it's already sliced
It definately needed support
@@Youngjackj I've printed more complex parts than that with zero support.
Theres even a guy here on CZcams who does zero support 90° printing.
Support material is wasteful, all you need is better management of your slicing software.
@@Duck_side and that compromises the finish, this is for a mouse. Part kd the design process is considering where its going to be used
Because, the people want just "Print & Go" and BambuLab is particularly suitable for this. But hey, better than back then where many went with PVA, which is expensive support material.
How to do to print smooth without support, requires a bit knownledge and experience.
This made my airpod break with bass... now I gotta put it in my case for a few minutes
That's gotta be the most organized mouse Sodder board layout that I have ever seen
vote for 3d printed keyboard
👇
3D printed keyboard next? 👀
@@davidlikestoprint yes please~
@@davidlikestoprintyesss
3d printed monitor later
Yesss
what plastic did u use bro? Looks clean
Pla +
@@davidlikestoprint petg might have been better... Pla+ may start to crumble over time.
lol but like that's still really cool cuz you can swap exterior parts to make it better (or worse)
Legit thought the wheel was a trackball for a minute, I was like hold up
Very very nice.. I love the colors
Thank you so much 😊
Uuuuu vidi bosanca gleda engleze sto 3d printaju sve zivo😂😂 btw i ja sam bosanac
Who think this is cool
👇
Bro would you please tell me at what speed you are printing? Thanks, yours looks really good
it must be so light i couldn't play with that but it's still impresive
How cheap does it feel?
It's depend on what you put inside. It can be insides from cheap China mouse or you can buy good parts. Also with skills 3d model can look like art. Seems you can use also expensive UF 3d printer.
I’ll bet it feels cheap, but some captive weights in the 3D printed design could help with making it feel more premium.
I mean it’s a mouse that needs a battery it’s cheap asf lol
definitely cheap af
What the hell was the point if you were just going to scalp a store-bought Mouse for parts?
building a shell that you actually like?
it's a diy kit you can buy, he did not scalp anything
this child still think we can make mouse chip at home
@@mira8950Why are you writing in third person?
maybe he likes building stuff? what is ur point lol
That’s amazing dude I’m impressed
Why is this so satisfying😮
I bet all the parts cost more than buying a mouse
and your point is?
@@driftboardI’ve made my point, what do you want?
no, you didn't make any point. a custom keyboard is more expensive than buying a shit keyboard, boom roasted all custom keyboards i've made my point. (except i haven't) there's no point in saying "oh this is more expensive than a prebuilt mouse!" yeah, it probably is? and what's your issue with that. especially considering this is someone else's money and time. not yours@@davstar
@@driftboard Okay fair enough, I found that building my own keyboard costed more in the end. I guess it does depend on the overall quality you’re going for.
wow What a quality, whats your machine and could you please share your cura settings ?
what 3d printer do you use
you have a link for the STL files& for the internals? I need to print that thing!
That's really cool! Is there any stl file?
What are those roots sticked or printed together with main design?
A rhythmic sound!
What screwdriver are you using?
What type of 3D printer u used for that project?
My superlight shell is 3d printed honeycombed. These things are amazing for gaming and don't let stress fool you.
Have the same driver, freakin love it.
what screwdriver u use bro?
Okay - are there links for the mouse innards and the files for the print?
A 3D printed red and black mouse would be nice to have
Very smooth layer lines
Please how did you create these supports? and what brand of filaments do you use for the black color?
i would add some led lighting inside of it so it look cooler!
I love the fact it has a similar design of redragon
okay I've heard of building a PC but building a mouse, now thats just crazy
Bro it's look so good 😭
What is his support material style and how would I use it in Cura?
What website do you use to find STL's (the one in the video)
Wish my 3d printer could do beautiful prints like that
Pretty neat, but terrible that the sensor is offset from center of the mouse. Makes left/right movements feel unnatural.
That's crazy, when did Bambulab start selling mouse parts?
Hmmm, could also turn a mouse into a left-handed one for way less than the stupid mark-ups we normally get charged
Thats something id actuslly buy
Cool, but where are the thumb buttons and left/right mouse wheel clicks.
It’s the dollar tree battery for me good job bro 🔥
Do 3d printed keyboard next
That's so dope. Despite how cool this is, the whole time I was thinking to myself "plastic is so bad, and there are traces of micro plastic throughout the entire world".
What screwdriver is that? It looks so nice to use