There is actually an Anakin lightsaber made by Disney however, it’s extremely rare. It comes in the duel of the heroes set with obi wans rots lightsaber and a sick looking case
Anakin's lightsaber visually describes his personality through his life. His episode II saber: The basics, nothing special but gets the job done. Fitting for a padawan. CW, Episode III: Elegant, with an aggressive twist on tradition. This saber was built with his preference for duels in mind and we see his true personality show through it, protective but aggressive and willing to bend rules to finish the job. Vader's Saber: A larger, deadlier saber thanks to the settings designed to gain the dominant (bordering unfair) hand in duels, and synthetic red blade (which are more powerful than organic crystals). Takes a ton of inspiration from the weapon of his former self, only this time, holds nothing back in the name of tradition nor honor. This weapon shows us who Vader is, a cold hearted killing machine.
I've always thought Vader's saber looks extremely similar to Yoda's as well. Could be that Vader is mocking Yoda, and creating his lightsaber to look similar could show that he believes he has surpassed Yoda as Vader. Just speculation from me.
@@Magfnneto Hate to be that guy, but actually Vaders saber is actually basically just a redo of his ep. 2 saber, just instead of chrome all around the emitter, its black for vaders. Much like the ROTS and ANH Graflex saber Luke gets looks very similar(Canon they are the same lightsaber just passed on) to each other.
That's the First Anakin model Vaders Sabers sells and it is very accurate to EPISODE 3, identical almost! The new brass Anakin model is nice, but the bunny ears are wrong, hence why it's cheaper on their website than the first one. They are both awesome, but I prefer accuracy over a little heavier hilt. MTFBY!
I must say EPISODE 3 is nice, but His EPISODE 2 Saber is so underrated!! Light side vader hilt with Luke like LEDs near top. Small and slim, my favorite saber!!
@mathewcurtis8484 it's combination of holding the saber perpendicular to the wall (horizontally), pressing the aux, and tapping the saber against the wall. Standard if/then programming.
I got one of these and thought the exact same thing BUT I realised they’ve compromised with where they’ve put the button so the blade can sit deeper in the hilt, which I think was a good move because it feels super sturdy. It is a shame the button is on the gold bit but you can also use a gesture to turn it on if you want. The button actually does still press in, but if you look into it you can see there’s no way a switch for a button would fit in there unless the blade recess was like 1 inch deep
@@Slayorama big red button is for show, smaller red button opposite that is an actual button but with nothing wired to it, REAL button to active the lightsaber is hidden under the rectangular Gold bit
@@jameswalmsley9038 That is what it is used for the sequels and one scene in the clone wars but older replicas of the rots lightsaber has the lightsaber be activated/deactivated by the gold piece on the side of the activation box.
no, the clip on the flash handle used for the original prop wasnt attached to the outer casing of the flash handle, but clipped THROUGH the outer casing, clipped onto an inner ring but basically that protrusion above the red button was a clip that was removable through the other side of the unit
It may be the most realistic one if it was just a liiittle more screen accurate. Since Disney is selling an Anakin saber now as well, that point goes to them I'm afraid. But still very neat thing :D
Even with all the different color options that the neopixel blade has, I could never bring myself to change the og blue color. That blade is sacred. It's the Youngling Slayer 2000!!
Very true. But the average fan at disneyland has no idea about neopixel. My wife had a good point, if they sold neopixels at the park or at least an optional upgrade, people would probably buy them for that much. I'm taking my neopixel to Disneyland this weekend... gonna put some disney sabers to shame 😂
Yes 🙏🙏. Now it just needs to focus on upgrading the actual blade and its interior foam/filling technology to something that looks more accurate in person to the core look of the sabers in the movies. Hopefully we'll get there.
Honestly... I might get flack for this, but I really like the shortened Rey's version. Like, a lot. And that's coming from a die-hard Anakin\Hayden fan. Reason being, as someone with a small frame the shorter size would benefit me. Not to mention I really like the fact that "gun iron sights" fins off. Trust me, I know the original purpose of it (coming from an old camera piece) But it looks much cleaner being smoother like that, plus it looks badass with the vent holes (a sucker for vent holes lol) 🙏💜📺💯
Only good thing about the new MW3 is seriously the multiplayer. Campaign is not the best and honestly super controversial. Zombies I personally haven’t played yet but Vanoss, Wildcat, and Nogla showed me that it’s not worth it. Love content as always Vanoss!
I'm now considering to get the Neopixel saber, and the feature were you cut a wall might be cool for a short film just woth some special effects for sparks and molten metal effect.
Oh you said the ROTS. It might be? I know the skinny flex is more accurate. I think saber armory sells those. I'm a little fuzzy on prequel saber replicas.
That makes me think, Disney had 0 respect to Anakin's lightsaber, they made luke to throw it away in the last jedi, then kylo and rey broke it In the middle, I hate you Disney 😭👊
I have that same one and the obiwan as well! I love both of them! Saber theory is amazing and also has wonderful and very helpful customer service! My obiwan lightsaber innards went bad and they sent me a free replacement to put in! I love their products!
Somebody should combine a neopixel blade with a hilt that's actually made from an old 60's camera flash mount and kitbashed parts from old modelling kits (which is how Lucasfilm made it for A New Hope). It would be so cool to see the most realistic lightsaber blade on the most realistic lightsaber hilt! 🤯
Bro neopixels are crazy, back when i was fighting with sabers it was literally an led, a switch, and a battery pack in an aluminum tube. Good old days!
Imagine waking up in the night and your roommate is in a dark corridor with a red lights saber in all dark running after you as you try to escape that's the type of roommate I dream to be
everyone knows that the most realistic light sabers will have a voice over from the light saber itself first, before slowly loading and activating the blade
I’m not sure if it is just a scaling thing but it always seems like the Disney lightsabers are thicker than how they look on screen, the neopixel one looks about the right scale
The best ones ate made from an actual Graflex battery handle for a xamera flash. As long as you get all the other components right on the outside. I'd live to see the innards of the Neopixel put into the actual grafted. Because that truly would be accurate. I bought one for 10 bucks way back in 1998. Bit have yet to turn it into a lightsaber hilt.
If you're not bullshitting and actually got one for 10$ way back in 98 and you want to covert to a working Neopixel lightsaber, there is a ton of saber smiths and independent people who could get that done for you and do a excellent job at it. There has actually been others that have actually done that and converted them with the correct externals and they look great 👌. I would save up and get a good crystal chamber chassis for it as well for its internal electronics and sound board if you have a legit Graflex flash handle. Would be priceless to Star Wars fans and would be worth a good chunk of money 💰.
@shagman9684 OH that is so cool. I wasn't aware people were modifying the actual Grafkex handles into Neopixel sabers. Thanks I'll have to look into it.
@SchardtCinematic yeah no problem. There is plenty of resources and forums around who have a plethora of info on how to go about getting it done right 👍.
technically, no. there’s one that can be made that’s better. it has a CFX board, and is owned by Tuhqa, and i’m trying to get one as well. it has a magnetic ring, and if the ring comes close to the saber, it’ll ignite. Force ignition on a lightsaber makes it more realistic, yk?
neopixs are the best lightsabers
This was my first neopixal 🥳🔥
@@ASAPBLOCKAY pls add link to buy
Neopixel is not a brand or a company. It's the name of the technology used inside the blade.
@@ASAPBLOCKAY yo anakin model is ridiculously expensive innit?
neopixel is not a brand
Don't know why I half expected it to go through the wall 💀
Same😂
Yeah me too😂
Same😭✋
We can only hope
Yep
There is actually an Anakin lightsaber made by Disney however, it’s extremely rare. It comes in the duel of the heroes set with obi wans rots lightsaber and a sick looking case
There’s a standard release now. Comes in the regular gray case.
Behold: the youngling slayer 2000!
Edit: this comment section is just entertainment at this point!😂
I’m sorry, that’s not funny anymore.
@@Alexisme. It's not supposed to be funny, it's true.
@@UI_Shaggy05 The joke has been done and said for over 15 years now, I think pretty much everyone’s done laughing.
@@Alexisme. then don't laugh.
@@snigdhobanerjee7857 I was never laughing, why do you I commented this ☠️
The neopixel lightsabers are amazing. I freaking love them
If it had been cheaper... I would've been Grievous by now
Edit: thanks for the 1k likes you lot
This will make a good addition to my collection.
*robotically coughs in theft*
Yes...
Hello there
@@maxshalimov2646 General Kenobi
Your lightsabers will make a fine addition to my collection.
Hello there
@@eligood100GENERAL KENOBI YOU ARE A BOLD ONE
IT’S THE YOUNGLING SLAYER 9000!!!!!
Oh dang
The younglings should’ve covered themselves in sand
No
It's the Separatist Widowmaker Mk II
I just love how clean the start up is. Not to be a hater but hate those sabers that have those flashing segmented startups.
Anakin's lightsaber visually describes his personality through his life.
His episode II saber: The basics, nothing special but gets the job done. Fitting for a padawan.
CW, Episode III: Elegant, with an aggressive twist on tradition. This saber was built with his preference for duels in mind and we see his true personality show through it, protective but aggressive and willing to bend rules to finish the job.
Vader's Saber: A larger, deadlier saber thanks to the settings designed to gain the dominant (bordering unfair) hand in duels, and synthetic red blade (which are more powerful than organic crystals). Takes a ton of inspiration from the weapon of his former self, only this time, holds nothing back in the name of tradition nor honor. This weapon shows us who Vader is, a cold hearted killing machine.
I've always thought Vader's saber looks extremely similar to Yoda's as well. Could be that Vader is mocking Yoda, and creating his lightsaber to look similar could show that he believes he has surpassed Yoda as Vader. Just speculation from me.
@@Magfnneto Hate to be that guy, but actually Vaders saber is actually basically just a redo of his ep. 2 saber, just instead of chrome all around the emitter, its black for vaders. Much like the ROTS and ANH Graflex saber Luke gets looks very similar(Canon they are the same lightsaber just passed on) to each other.
That's the First Anakin model Vaders Sabers sells and it is very accurate to EPISODE 3, identical almost! The new brass Anakin model is nice, but the bunny ears are wrong, hence why it's cheaper on their website than the first one. They are both awesome, but I prefer accuracy over a little heavier hilt. MTFBY!
I must say EPISODE 3 is nice, but His EPISODE 2 Saber is so underrated!! Light side vader hilt with Luke like LEDs near top. Small and slim, my favorite saber!!
🤓
As far as I know, the only reason it has the “wall cutting” effect is because of the proffie 2.2 soundboard/control board in it
The tip drag effect is also on a xenopixel set up, it's just not quite as flashy as the proffie 2.2 versions
It's also available on CFX.
Yeah and it doesn’t happen when you touch something, it only happens when you hold the button for a certain time
@mathewcurtis8484 it's combination of holding the saber perpendicular to the wall (horizontally), pressing the aux, and tapping the saber against the wall.
Standard if/then programming.
Now THAT is a lightsaber! It looks exactly like the movies!
"There isn't really Anakin lightsaber, this is the one they use for Rey."
They, WHAT!?!?!?
It's over Anakin, I have the high ground.
you underestimate my power
@@Isabel-rm7xh Don't try it
@@Isabel-rm7xh Don't try it
As a telescopic plastic lightsaber connoisseur...neat
Didn't galaxies edge put out a revenge of the sith obi wan and anakin lightsaber set last summer?
Yes they did, I have them
Must of cuz the one he has is missing the clip on top. The new one looks better then both of those but doesn’t have the fancy light tricks
@@shawnwillbok True, the lighting and SFX are definitely selling points of the Neopixel
@@shawnwillbokare you saying the Legacy Anakin saber looks better then the one in this video???
It would be the EXACT same if the switch ignited the saber and not the plate
Like the gold switch towards the middle
I got one of these and thought the exact same thing BUT I realised they’ve compromised with where they’ve put the button so the blade can sit deeper in the hilt, which I think was a good move because it feels super sturdy. It is a shame the button is on the gold bit but you can also use a gesture to turn it on if you want. The button actually does still press in, but if you look into it you can see there’s no way a switch for a button would fit in there unless the blade recess was like 1 inch deep
Isn't it the big red button?
@@Slayorama big red button is for show, smaller red button opposite that is an actual button but with nothing wired to it, REAL button to active the lightsaber is hidden under the rectangular Gold bit
@@jameswalmsley9038 That is what it is used for the sequels and one scene in the clone wars but older replicas of the rots lightsaber has the lightsaber be activated/deactivated by the gold piece on the side of the activation box.
I love how when ray gets the dagger she says “this weapon has done horrible things” when she literally has the youngling slayer 9000 😂
I’m not even really a Star Wars fan and I want this
no, the clip on the flash handle used for the original prop wasnt attached to the outer casing of the flash handle, but clipped THROUGH the outer casing, clipped onto an inner ring
but basically that protrusion above the red button was a clip that was removable through the other side of the unit
“Zoinks! It’s the gay blade!”
Lol I get that reference
It may be the most realistic one if it was just a liiittle more screen accurate. Since Disney is selling an Anakin saber now as well, that point goes to them I'm afraid. But still very neat thing :D
"Rainbow one"
Nah I ain't geh.
Ohh but that's the most feared saber of all! Not only will it cut right through you, it will also give you AIDS.
Lmao facts
@@shockensaw3671i find your lack of 🐱 disturbing
Its honestly beautiful. The hilt is a perfect replica and the saber is GORGEOUS.
Even with all the different color options that the neopixel blade has, I could never bring myself to change the og blue color. That blade is sacred. It's the Youngling Slayer 2000!!
THE YOUGLING SLAYER
Well I mean.. a $150 saber vs a $600 saber.
Very true. But the average fan at disneyland has no idea about neopixel.
My wife had a good point, if they sold neopixels at the park or at least an optional upgrade, people would probably buy them for that much.
I'm taking my neopixel to Disneyland this weekend... gonna put some disney sabers to shame 😂
It's hilarious when everyone sees rainbow shiny blade called GAYBER...😅😂
That lightsaber has veins 😮💀
Neopixel technology is the best thing to happen to the saber building community.
Yes 🙏🙏. Now it just needs to focus on upgrading the actual blade and its interior foam/filling technology to something that looks more accurate in person to the core look of the sabers in the movies.
Hopefully we'll get there.
10 times brighter. Is this how you're standing out from the other "is this the most realistic lightsaber" reel factories, by just making up numbers
Zoinks! It’s the gay blade!
Imagine killing a homophobe with one of those
You may have bested me for now, but you won't for long when i activate my...
BISEXUAL BLADE! HAVE AT THEE!
Grafflex cameras have come a long way to being one of the most iconic lightsaber
That looks absolutely sick 🔥
I want one without the blade to display, maybe starkiller or revan hilt. Would be sick.
It always irritates me when lightsaber replicas don’t use the trigger to active the Saber but the dial on the side
Neopixel shine like a true lightsaber on camera though
And they still can't spawn a lightsaber for that price.
If you want a lightsaber that cheap go for neo, not my taste but people saying there 100$
@@lolmain090neo pixels are like $200
@@lolmain090 neo pixel be costing more than a tesla
Honestly... I might get flack for this, but I really like the shortened Rey's version. Like, a lot. And that's coming from a die-hard Anakin\Hayden fan. Reason being, as someone with a small frame the shorter size would benefit me. Not to mention I really like the fact that "gun iron sights" fins off. Trust me, I know the original purpose of it (coming from an old camera piece) But it looks much cleaner being smoother like that, plus it looks badass with the vent holes (a sucker for vent holes lol) 🙏💜📺💯
Disney actually did release an official Anakin skywalker version recently
Only good thing about the new MW3 is seriously the multiplayer. Campaign is not the best and honestly super controversial. Zombies I personally haven’t played yet but Vanoss, Wildcat, and Nogla showed me that it’s not worth it. Love content as always Vanoss!
That wall cutting effect is unique
I'm now considering to get the Neopixel saber, and the feature were you cut a wall might be cool for a short film just woth some special effects for sparks and molten metal effect.
Indeed, word 2 my mother, bacon egg and cheese
hahahah
Looks great. Little weird they used purple for Anakin’s lightsaber. But it’s still cool :)
I guess if vaders lightsaber was RGB he’d be called Darth Gayder 😭
Got dayum-noot noot
Dude you look like Kylo ren… and beautiful saber I’m definitely getting this.
All time favorite is obi wan ep 3, I’d sell both my kidneys and my gramma for it 😅😅😅
I'm hoping to review that next!
@@ASAPBLOCKAY please do, for people like me who can’t ever afford that but love it and can still wish and dream lol
@@ASAPBLOCKAY Where is this saber from? Who makes it? And where can we buy one?
@@ironman98 that guy is a jerk just don't dubs
I still have my fx lightsaber from 05! And still love it
Most realistic would be the Aniflex Elite from 7Chambers, nice Ani saber tho
That ROTS Anakin looks chonky lol. May be due to camera perspective
Nah you are right. The disney sabers are thicc in a bad way.
Oh you said the ROTS. It might be? I know the skinny flex is more accurate. I think saber armory sells those. I'm a little fuzzy on prequel saber replicas.
I approve of you calling it Anakin’s Lightsaber.
Y'know, it's funny that Obi-Wan and Maz Kanata owned the lightsaber longer than Anakin, Luke, or Rey ever did.
KR sabers hilts are my favourite, but for my financial states, neopixel or xenopixel replica sabers from nice companies are a sweet spot.
I need this immediately.
They are stupidly expensive tho, I guarantee you had they been half their price twice as many people would own one.
i got my neopixle for 499 not much more than the Disney one and i got it custom
@@justinbrooks9454 Could u send me a link on how you got yours
Damn I read over 100 comments to get to this one that kinda mentions the price.. im like how is no-one entering the price
I like the rainbow one the most😅❤😂🎉😊
*Chandler left the chat* *gigachad joined the chat*
Ain't no way. Disney made Anakin's lightsaber and sold it as Rey's? No way
Why is it that Disney can't make lightsabers as amazing as this :/
Third party retailers have always been better than the official branded sabers. Has nothing to do with Disney.
@@Tores444if anything it’s Hasbro, but people always yell at the bigger entity
Well the Disney ones are considerably more affordable for one.
true
Disney's goin woke goin broke
You look like kylo ren when cutting the wall lmao
Now I want one. 😩
Wow it’s so beautiful I like the effect it has when you put the blade on the wall
behold the gay slicer 3000
I like the detail they added to it that it has a pointed tip like how in the pre-Qualls, the light sabers had a pointed tip for some reason
Nice!
Thank you!
Your making my wallet tremble please sir im broke 😂😂
Sequal fans be like: Whos anankin? Thats reys lightsaber.
FINALLY someone got it right! I personally prefer “Youngling Slayer 9000” but it belongs to Anakin, even Obi-Wan said so.
That makes me think, Disney had 0 respect to Anakin's lightsaber, they made luke to throw it away in the last jedi, then kylo and rey broke it In the middle, I hate you Disney 😭👊
A lot cheaper than a neopixel saber for sure, the only issue i have with my Disney sabers is that the sound is a bit low
There shouldn't be a rainbow Saber. Ever. For any reason.
Oh no, can't have fun! 🙄
sir i have a setting ware it moans when i swing it. u can make it do whatever with the programable bord
Sure you can as seen in the video.
I have that same one and the obiwan as well! I love both of them! Saber theory is amazing and also has wonderful and very helpful customer service! My obiwan lightsaber innards went bad and they sent me a free replacement to put in! I love their products!
Here before famous
👇
Somebody should combine a neopixel blade with a hilt that's actually made from an old 60's camera flash mount and kitbashed parts from old modelling kits (which is how Lucasfilm made it for A New Hope). It would be so cool to see the most realistic lightsaber blade on the most realistic lightsaber hilt! 🤯
Real vintage parts sabers can cost upwards of $10,000. Of the real parts builds I've seen in the saber community, nobody puts electronics in them.
"casually pulls out the gaysaber"
The Disney lightsabers batteries are probably like the younglings.
It doesn't live long.
I own one….by far my favorite lightsaber I own.
But at least you don't go broke every time you buy a Disney lightsaber lol
Master Skywalker
"What bright light saber you have ”
The force fx elite lightsaber has the same feature of looking like it's cutting through the wall
Bro neopixels are crazy, back when i was fighting with sabers it was literally an led, a switch, and a battery pack in an aluminum tube.
Good old days!
Neopixel is dope but nothing beats the experience of getting a legacy lightsaber at Black spire
Youngling slayer 9000 😍😍😍😍😍😍
Technically isn’t the Rey saber from the sequels literally just anakin anyway?
I know it’s a replica of the model used for those movies but still.
Disney have made an anakin lightsaber but for a limited time with the obi wan and anakin Mustafar duel box thingy
Imagine waking up in the night and your roommate is in a dark corridor with a red lights saber in all dark running after you as you try to escape that's the type of roommate I dream to be
The Disney version you have is a Luke Skywalker episode four. But the mechanics will be the same if it was an Anakin, Disney saber.
everyone knows that the most realistic light sabers will have a voice over from the light saber itself first, before slowly loading and activating the blade
Disney’s galaxy edging
Anakin Skywalker committed treason
The wall cutting effect got me!
The different colors and fonts ruin it for me personally but the the design of the hilts and shine are perfect.
the younglin slayer 9000 with a rainbow mode? it became the very thing it swore to destroy
That's so cool! This saber will be on top of my ranking, just like the prize!
I’m not sure if it is just a scaling thing but it always seems like the Disney lightsabers are thicker than how they look on screen, the neopixel one looks about the right scale
Imagine seeing an RGB lightsaber in any form of media related to Star Wars 😂
I thought the galaxies edge was bright until the Neopixel turned on
Anakin had two lightsaber. The first one he lost on Geonosis (thankfully, Obi-Wan didn't kill him).
obiwansganakillme
The best ones ate made from an actual Graflex battery handle for a xamera flash. As long as you get all the other components right on the outside. I'd live to see the innards of the Neopixel put into the actual grafted. Because that truly would be accurate. I bought one for 10 bucks way back in 1998. Bit have yet to turn it into a lightsaber hilt.
If you're not bullshitting and actually got one for 10$ way back in 98 and you want to covert to a working Neopixel lightsaber, there is a ton of saber smiths and independent people who could get that done for you and do a excellent job at it. There has actually been others that have actually done that and converted them with the correct externals and they look great 👌. I would save up and get a good crystal chamber chassis for it as well for its internal electronics and sound board if you have a legit Graflex flash handle. Would be priceless to Star Wars fans and would be worth a good chunk of money 💰.
@shagman9684 OH that is so cool. I wasn't aware people were modifying the actual Grafkex handles into Neopixel sabers. Thanks I'll have to look into it.
@SchardtCinematic yeah no problem. There is plenty of resources and forums around who have a plethora of info on how to go about getting it done right 👍.
@shagman9684 That is Awesome I'll look into it.
Yeah do it if you can for sure. You'll be the envy of every Star Wars fan 😎👌
Making 42k a month at the least and still not giving CZcams money, what a chad
fans are people like anyone else
we need heroes and warriors to help make this year good for everyone .
technically, no. there’s one that can be made that’s better. it has a CFX board, and is owned by Tuhqa, and i’m trying to get one as well. it has a magnetic ring, and if the ring comes close to the saber, it’ll ignite. Force ignition on a lightsaber makes it more realistic, yk?