Have you swapped out the upper clutch cable on your bike? How did it go and did you come up with any tips you can share? Once you get the hang of the process you can really knock it out quickly.
It won’t cause the red button to engage automatically - probably easiest to compress the spring and press in the red clip before snapping the new one onto the lower clutch cable, but you can experiment. Once you get in there it’s all easy to work with. But I wished I had an extra hand a couple of times :) Let me know how it goes!
No not as yet I needed to get some info on how to do it with these new clutch cable setups very techy now bikes a BIG change from my first bike a 1959 BMW when things were simple but I do love my 2020 Softail
I understand completely! If you ever need to do that clutch hub adjustment it’s quite simple and you’ll have no problems doing it yourself if you’re so inclined.
Done and dusted it was a breeze 10 leisurely minutes and it was done thanks for the information / video made it an easy job, now to do the top brake line
This video was extremely helpful. Noticed my clutch cable binding on Thursday took as look at it and it’s ready to snap. Over nighted a new one and installed it this evening, for the three day weekend, thanks to this video,
Hey sportstyle - thanks for the kind words! Glad it was helpful. And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
I just changed out my handlebars on my 21 Road Glide Special and needed more slack on my clutch cable. I ended up having to reroute it to fix my issue. Your video helped me tremendously and is much appreciated!
Hey Zack Britton - thanks for the feedback - so glad this was beneficial! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
@@RonsWorkshop Hey Ron I'm putting 13inch T bars on my 2020 Lowrider S and trying to figure out what length upper clutch cable I need. Even the harley dealership in town could help me out. Any advice would be appreciated. Love the channel will definitely hit you up for a sticker
Hey Zack - I installed 17” apes with stock risers and I needed a 46” upper clutch cable. Lol I tried 49 and 44 before I got it right. So you *should* be able to base it off of mine, so maybe the 42” upper? There’s a link to the list of Harley upper clutch cable part numbers in the video description. Let me know if that helps, and for the channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Hey Michael - thanks for the kind words! I’m so glad it was helpful. And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Thanks to your most excellent video, removing my old clutch cable and installing the new clutch cable was a breeze! Kudos to you, sir. Now, finding a new clutch cable was a whole other story. Mine was at least 3 months back ordered, but thanks to eBay, I found the one I needed. Thanks again for putting up this video! You’re saving a lot of people a lot of headaches.👍🏻
Thanks for the tips, I got that clutch adjustment exactly where I like to feel it..thanks man have a great day, and again appreciate your extra and exact pinpoints that took out the extra work for me..
Thanks for the video, it was helpful to me as I was not privi to the new type clutch adjuster which I decided had to go. You're video helped me to detach the cable using a few more tricks. Lifting the retainer clip on the upper cable while pushing the end of the cable out of it's cradle enough to slip the cable out. After removing the stock adjuster and spring, I then slipped in the new Fat Baggers easy clutch adjuster and o-ring, then reattaching the cable back in place. The freeplace adjustment is now back to simple nut wrench tools and a parts that won't suddenly strip out and break.
Hey J Rametta - thanks for the encouragement and for sharing your project. Sounds like it worked out perfectly! That fat baggers clutch adjuster seems like a nice addition.
Hey Scott - I’m so glad it was helpful, and thanks for the kind words! If you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Has anyone else had the new clutch cable come in, and it doesn’t come with the full two piece yellow housing? Only comes with the top portion. I got mine all put together thanks to your video, but the aftermarket small yellow housing doesn’t snap into the big yellow housing like the stock one. I don’t think it will matter as it is held by the cables but, if someone could help that would be awesome! Great vid
Hey Jeremy - the complete yellow housing should be on the upper clutch cable, and then the lower clutch inner cable has a ball end that is held captive inside the yellow piece. Are you seeing something different than that?
Hey Satyo - thanks for the feedback - let me know how the projects go! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Hey Jack - glad it was helpful! I’ve got another video about the friction zone and how the clutch hub adjustment range affects it: czcams.com/video/xnD6rnGf5oI/video.html And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
yes - and those tabs and little clip things- they won't ever dry out, become brittle and then break off when you even slightly try to move them. Nope- no way. Harley couldn't figure out how to make a reliable and trouble free hydraulic clutch so now we gotta deal with this thing. ????? Anyway- thanks for making the video; wasn't ranting on you. Ride Safe Everybody.
@@RonsWorkshop First off I appreciate you and your page!! So why does this keep popping out? I thought it was the top half of the cable but maybe i just need to adjust the clutch as per your other video?
Hey Jeff - thanks for the kind words! Is it that red button down at the adjuster that’s popping out, or something else? And how many miles since the last clutch adjustment?
@@RonsWorkshop Dude you are the man! Went to adjust the clutch as per your video and that nut was one thread away from trashing my clutch! You and your videos are great and I'm a fan for life man! Thank you I'd love to send pics and vids if you'd like?
@@jeffparker8476 I'm so glad to hear that - and thanks for the kind words! You can send the pics to @RonsWorkshop on Telegram, Instagram or Signal, or get the email address by visiting the the channel page using a desktop computer (czcams.com/users/RonsWorkshopabout) then clicking on "View email address" - I'd put it here but CZcams strips out email addresses.
My pleasure! I’m glad it was helpful. If you need any info on doing the clutch hub adjustment you can check this video: czcams.com/video/xnD6rnGf5oI/video.html
Wow super fucking detailed and excellence in editing for this video. earned my sub my dude! Needed a visual guide for adjusting stuff on my fxlrs. Thanks again ron
Hey I Singh - thanks for the kind words! I’ve covered the clutch hub adjustment and friction zone in a recent video as well. If you ever need that, here’s the link: czcams.com/video/xnD6rnGf5oI/video.html And if you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Hey verne_141 hughes - so glad it was helpful! I’ve also covered how to do the adjustment down at the hub if you ever need it: czcams.com/video/xnD6rnGf5oI/video.html
I like a graphite lube like this one. I let it run down the inner cable from the top, until it comes out below. No risk of it getting gummy or sticky. amzn.to/458zLOf
Hey Cunningham - yeah, that's the tricky part for sure. I think I had the top end of the cable hanging free when I reconnected it down at the yellow adjuster. But even if I didn't, it would definitely make it easier and give more to work with. Let me know how it goes...
This is what I needed, because I just recently experienced some issues with my upper Clutch Cable inner liner crumpling up towards the lever causing a clutch slippage feel. I just want to ask if you or anyone ever experienced this, and what did you do? I have a 2019 FXDR114..... and first thing tomorrow, im going to do what you showed and replace it myself....!! Its better than waiting 4 weeks to see a replacement part arrive to our local Harley Shpp 😩🤔
Hey Mēģģët pAńGiE - glad this was useful for you! I haven’t had any problems with the liner. Let me know how it goes when you tackle it and if you want a channel sticker send me a DM Telegram or Instagram with the mailing info @RonsWorkshop
I know you get a lot of request, but I have yet to find a video on removing the rear tire on a 2018+ Heritage. A lot of stuff looks different from the 2017 and earlier models.
Hey Ron been a While!! No one seems to be asking a very important ?-- How do you measure the upper cable? I'm thinking that it is from the bottom plastic to the pinion hole. Is that right? Brian
Great question - but I don’t have a good answer. The did mine the hard way, trying three different lengths until I found the best one. Let me know if you find the proper method!
Hey ron, seems like the ridges on my red clip is worn out and when i put tension on the spring and squeeze the red clip to lock it in place, the stem just releases on its own and doesnt stay locked with the red clip. Would this be a problem?
Hey zephyrboy69 - well, it could be. You could slide the the black cover over it and test it out but it could be a bit risky. In the video description I’ve listed the Harley part numbers for the red clip and the yellow adjuster in case you have to replace either of them. Let me know how it goes.
Yea i tried to install it with two zip ties holding the red clip tighter. As soon as i pulled the clutch it collapsed again. I will have to get a new red clip. Let you know how that goes
I had to buy the upper clutch cable for my 2019 Softail but couldn't find information on how Harley Davidson determines the length of the cables they are selling. Help would be appeciated.
Hey THE_ELECTRICIAN - ok, so this *should* be a fairly accurate way to measure the UPPER clutch cable. I measured mine from the edge of the clutch perch to the bottom of the red clip on the yellow part to get a measurement that matches the specs on my upper clutch cable. Let me know if this helps.
Ron, I bought the Magnum upper clutch cable and it does not have the yellow housing coupler. Can the yellow coupler come off the old and go on the new upper clutch cable?
Hey Donald - I don’t think so. The yellow adjuster is attached to the lower clutch cable, and there’s a coupler inside that connects the upper and lower cables together. I’m guessing the Magnum cable is the one-piece style?
@Ron's Workshop I think you are right. This will be the first time switching out a clutch line. Put on 16 inch apes. Already replaced and rewired the new bars just have to switch out clutch and front brake lines. Thank you for your response!
I am planning on adding 5.5in pull back risers to my 2020 FXLRS. The risers require a reroute of the clutch cable from inside the triple clamp to outside. Do you think I will need to completely disconnect the upper clutch cable from the assembly in order to reroute it?
Hey benjieswork4me - it’s probably easiest to remove the pivot pin at the lever to disconnect the cable and then reroute it. The only hassle with that is the little circlip on the pivot pin, so get the pliers if you don’t have them. Removing the top end is easier than disconnecting the bottom. Is the stock cable long enough to use the risers? You might need a longer one.
Ron could you tell us what brand and model is the Snap Ring tool you are using for the pin, I swear I’ve ordered cheap and descent ones but the tip sizes are always to big. If you have a link that would be great. I always use a needle nose pliers.
Hey Jose - you release the tension down at the yellow adjuster. Pop out the red clip, compress the spring, and snap the red clip back in to leave the cable loose. Let me know if that helps…
I have a 2021 HD Lower rider s. I installed 8 in pull back risers, keeping stock bars. So I needed a longer clutch cable. Magnum said I needed a 6 ft new clutch cable. So I ordered it. That thing goes from handlebars down underneath the bike and around reaching to the clutch compartment on right sight of bike. But why would I need to drop the tranny fluid and open that compartment up to add that in when I’ve got the quick release up by the front of the bike? Wasn’t that the whole purpose of HD adding that in there for convenience? Not sure how they would’ve gotten confused but I just assumed they knew what that bike needed after I told them all the parts that I bought and what I was doing. Could you confirm if I need to send that long clutch cable back and get a shorter one that only reaches to the quick release from the clutch lever on the handlebars? Simple measurement to me would solve the issue and let them know it magnum
Hey GreenHouseMortgage - you are correct in that the new two-piece cable makes it really easy to swap out the top half for bar changes, etc. it sounds like magnum sent you a traditional cable. That may be that HD is the only one making the new two-piece parts, but I have no idea. If you click “show more” on this video description you can find a link to a chart that shows the upper clutch cable lengths and part numbers. That’s what you’re looking for. Let me know if that helps and what you end up with. And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Hey Blake - those are Lucky Speed Shop 6blocc shorty levers. I really like them a lot and did a video series on them - here’s a link to final video in the series: czcams.com/video/kzVcvNa64Qs/video.html
Would this be the same for the fxfbs? I can't seem to remove the coupler on the stock upper cable in order to reuse on the aftermarket longer clutch cable. Please help!
Hey Warren - I think it is the same but I haven’t seen it firsthand. Do you see the little metal tab that is bent down over the top of the cable ball end? It can be a bit fiddly trying to get it to release after you bend the metal tab up.
@@RonsWorkshop Yes, I see the metal tab and I was able to use it to detach the two cables but the coupler doesn't seem to be removable from the upper cable.
Ahhh - there are a couple of plastic fingers at the bottom of the yellow part. Gently pry them outward and once they release you can remove it. I think there are two of them.
Questions I have a 2021 road glide. And they came out with clutch cables instead of hydraulic clutch. If I wanted to install 16in ape hangers, could I do this top cable change out?
Hey Mrchevy305 - from what I can tell it looks like it's the same two-piece clutch cable that you see here in this video, but it looks like on the 2021 Road Glide the adjuster is on the right side of the frame. If you find that adjuster, pop the clamp off the frame, and slide the plastic cover up you can check out the yellow adjuster. If it looks like what you see in the video you should be good to go. Here's a link to the different length upper clutch cables that work on the softails (presumably the same for yours): cimg2.ibsrv.net/gimg/www.hdforums.com-vbulletin/779x804/upper_cllutch_cable_2_2d51a93c44bf296d0812a88a5aaba8055b38afb7.jpg
Hi Ron, thank you for the great Video. I changed the handlebars on Ma Street Bob 2020. Now i need a shorter Upper clutch cabel. How do you measure the length of the cable. From the outside Clutch Handle To the end of the yellow plastic+ black plastic? Best wishes from Germany
Hey Matthias - ok, so this *should* be a fairly accurate way to measure the upper clutch cable. I measured mine from the edge of the clutch perch to the bottom of the red clip on the yellow part to get a measurement that matches the specs on my upper clutch cable. Here is a list of upper clutch cable lengths and part numbers - let me know if this helps: cimg2.ibsrv.net/gimg/www.hdforums.com-vbulletin/779x804/upper_cllutch_cable_2_2d51a93c44bf296d0812a88a5aaba8055b38afb7.jpg
Hey Kevin - I got a Harley upper clutch cable that was long enough. It took me three tries lol. In the video description I have a link to the list of part numbers and lengths for the upper clutch cables. I’m not sure if the bottom end down at the cover is the same as the previous models or not. If it is then you could use the previous one-piece cable in the right length but I have no idea if it’s compatible.
@@RonsWorkshop I just waited 4 weeks for my local HD stealership to get my parts that were on "backorder" got there and the tried giving me a brake cable and clutch cable from L.A. choppers that I could've ordered weeks ago. They seemed confused about it being a new clutch cable ... idk .. i just want to ride again 😪
The new design is kind of dangerous for rookie bike wrenchers, be careful. thing came lose on me after changing to some shorty levers, bike almost went through the garage..lol
My cable broke somewhere under that plastic cover the other day. Not even at 200 miles yet on the bike. Curious as to what part failed or if it wasn’t installed/adjusted correctly. I was lucky that I was in my neighborhood already so I rode home in 2nd and popped it into neutral in the driveway.
Hey Jeff - that’s strange! I wouldn’t expect anything like that. Let me know what you find if you get into it. I wonder if it broke or just came disconnected at the coupler between the upper abs lower cables. Glad you were close to home!
Hi Ron my bikes done 230 miles only I went to put on my Oberon clutch lever followed all your instructions that are very clear thanks when I went to engage a gear the clutch was not clearing tried the adjustments numerous time no good put my original lever back on still no good any ideas Thanks Paul
Yes Ron I did this on the new lever I was trying to fit about 6 times then I came across we’re you said you had trouble so I put my original one back on still dragged the clutch tried the adjuster loads of times still the same it’s strange ??
@paulbodypumper1 yeah that is strange. I’m not sure what is going on. It’s the same clutch cable, right? And you didn’t make any changes down at the clutch basket?
New here. 2019 heritage. Putting on 14in apes. Sure question asked stock upper clutch cable not on chart. Don’t want too much cable sticking up. Will 40in work for my application? Keep up the good work. Thank man
Hey Gary - I’m using a 46” upper clutch cable with 17” apes. If you like that length based on the way my bike looks you could go with 43” upper. Thanks for the feedback! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Hey there Ron, If I want to replace my upper segment of my black color clutch cable , from the lever just to the yellow part , and change it for a braided one (for example), is it doable? I mean , do they sell the upper part alone (from the lever to the yellow plastic? If so , please guide me to the method my friend. Thank you in advance 👍👍👍
Hey there! It looks like Magnum makes several different braided upper clutch cable options that are compatible with the two-piece system: bit.ly/3OoA0KU Let me know if decide to try one!
@@RonsWorkshop Ron , I found it at Dennis Kirk’s , I have installed a 16” ape handlebar dominator on my soft tail standard, so I ordered a 50” one , it says it fits my bike , let’s see how it goes. 👍
I made a mistake today trying to pluck out the red clip. I put too much pressure on the yellow plastic piece and I cracked it. Any ideas besides the dealer where I could get one?
Hey PaullyBB - hmmmm. I’m not sure. It doesn’t look like that pet is available separately. Maybe you could snag an upper clutch cable from eBay? I’m also not sure if you can remove that part from the cable, but my initial guess is that it may not be possible. Let me know what you end up with.
hey man i just came across your page and subscribed great video i am in the process of new handle bars on my fxlrs and cannot find an extended upper clutch cable like the one your running. do you have any suggestions. the only thing i can find are full cables. thank you
Hey John - welcome to the channel! You’ll find this handy - it’s a list of Harley OEM part numbers for the various upper clutch cable lengths: cimg2.ibsrv.net/gimg/www.hdforums.com-vbulletin/422x435/upper_cllutch_cable_2_2d51a93c44bf296d0812a88a5aaba8055b38afb7.jpg Let me know if that helps. If you want a channel sticker send me a DM on Instagram with the mailing info @RonsWorkshop
This link for these cables is exactly what I was looking for, also replaces bars on the FXLRS, but now I’m perplexed as to the proper measurement of the cable. Any tips on if it is the cable sheathing, cable itself, down to the total end of the yellow adjuster?
Hey Ronald - ok, so this *should* be a fairly accurate way to measure the UPPER clutch cable. I measured mine from the edge of the clutch perch to the bottom of the red clip on the yellow part to get a measurement that matches the specs on my upper clutch cable. Let me know if this helps. If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
It did work actually. The stock cable is about 33”, so overall I went with a 42” cable which should be more than plenty for the 14” lan splitters I put on there. Not gonna lie, I absolutely love this clutch set up now that I understand it. Can’t wait for it to come in. I really appreciate the support, your video and response helped tremendously, especially compared to the dealership.
I have a 2018 Fat Boy 107, it has ape hangers , I changed to a short riser and cable is way too long. I need the upper cable replacement to be 48 to 49 inches Where can I get just the upper cable, Local Harley shop says you have to buy upper and lower cables, ordered the cable they said was like the new cable, it came in wrong it was old style. Where can I get just the upper cable or both pieces if necessary. I mean the new style cable. Thanks
Hey Ray - check out this list of upper clutch cables - they are definitely sold separately! I went with 17" apes and the stock risers, and I am using a 46" upper clutch cable. Let me know if this helps: cimg2.ibsrv.net/gimg/www.hdforums.com-vbulletin/779x804/upper_cllutch_cable_2_2d51a93c44bf296d0812a88a5aaba8055b38afb7.jpg
@@RonsWorkshop Ron. Great video. Still confused with measurements have a 2019 heritage. The stock cable is not on the cable length chart. Put on a 14 in ape what cable would you suggest from chart. Thanks man
Hey Paul - That's a great solution! Thanks for sharing that. Sorry for the delay in responding - for some reason your comment didn't show up and I just found it.
Have you swapped out the upper clutch cable on your bike? How did it go and did you come up with any tips you can share? Once you get the hang of the process you can really knock it out quickly.
It won’t cause the red button to engage automatically - probably easiest to compress the spring and press in the red clip before snapping the new one onto the lower clutch cable, but you can experiment. Once you get in there it’s all easy to work with. But I wished I had an extra hand a couple of times :)
Let me know how it goes!
This was super helpful with changing out my clutch lever. Preciate it man.
No not as yet I needed to get some info on how to do it with these new clutch cable setups very techy now bikes a BIG change from my first bike a 1959 BMW when things were simple but I do love my 2020 Softail
I understand completely! If you ever need to do that clutch hub adjustment it’s quite simple and you’ll have no problems doing it yourself if you’re so inclined.
Done and dusted it was a breeze 10 leisurely minutes and it was done thanks for the information / video made it an easy job, now to do the top brake line
This video was extremely helpful. Noticed my clutch cable binding on Thursday took as look at it and it’s ready to snap. Over nighted a new one and installed it this evening, for the three day weekend, thanks to this video,
Hey Lucas - I’m so glad this was helpful, and thanks for the kind words!
This is easily the best tutorial on youtube ! Great job !
Hey sportstyle - thanks for the kind words! Glad it was helpful.
And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
I just changed out my handlebars on my 21 Road Glide Special and needed more slack on my clutch cable. I ended up having to reroute it to fix my issue. Your video helped me tremendously and is much appreciated!
Hey Scott - I’m so glad it helped you! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
This is by far the most well made instructional video I have ever seen. Thank you and well done!
Hey Zack Britton - thanks for the feedback - so glad this was beneficial!
If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
@@RonsWorkshop Hey Ron I'm putting 13inch T bars on my 2020 Lowrider S and trying to figure out what length upper clutch cable I need. Even the harley dealership in town could help me out. Any advice would be appreciated. Love the channel will definitely hit you up for a sticker
Hey Zack - I installed 17” apes with stock risers and I needed a 46” upper clutch cable. Lol I tried 49 and 44 before I got it right. So you *should* be able to base it off of mine, so maybe the 42” upper? There’s a link to the list of Harley upper clutch cable part numbers in the video description. Let me know if that helps, and for the channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Hey Ron, hope you will be making more videos as they are excellent.
Thanks Lou!
Thank You so much, this was an easy job because of you and this video. If I had to go by the shop manual alone, I'd still be scratching my head!!!
Hey Michael - thanks for the kind words! I’m so glad it was helpful.
And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Thanks to your most excellent video, removing my old clutch cable and installing the new clutch cable was a breeze! Kudos to you, sir.
Now, finding a new clutch cable was a whole other story. Mine was at least 3 months back ordered, but thanks to eBay, I found the one I needed. Thanks again for putting up this video! You’re saving a lot of people a lot of headaches.👍🏻
Hey Stephen M - thanks so much for the encouragement! I’m glad it went well for you.
One of the best instruction video's I've seen. Thank you!1
Thanks for the feedback, Mike!
If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
You're a great help sir
Thank you for the kind words - I’m so glad this was helpful!
Thanks for the tips, I got that clutch adjustment exactly where I like to feel it..thanks man have a great day, and again appreciate your extra and exact pinpoints that took out the extra work for me..
Hey George Cooper - I’m so glad this helpful, and thanks for the kind words!
Change the levers and I did not locked the red tab. This video was helpful thanks ✌🏻🏍️
I’m so glad it was helpful!
Thanks for the video, it was helpful to me as I was not privi to the new type clutch adjuster which I decided had to go. You're video helped me to detach the cable using a few more tricks. Lifting the retainer clip on the upper cable while pushing the end of the cable out of it's cradle enough to slip the cable out. After removing the stock adjuster and spring, I then slipped in the new Fat Baggers easy clutch adjuster and o-ring, then reattaching the cable back in place. The freeplace adjustment is now back to simple nut wrench tools and a parts that won't suddenly strip out and break.
Hey J Rametta - thanks for the encouragement and for sharing your project. Sounds like it worked out perfectly! That fat baggers clutch adjuster seems like a nice addition.
Super helpful Video!!
Very nice details! I liked and subscribed
Hey R Sanchez - I’m so glad this was helpful!
Brother, thank you so much for the video, this saved me a lot of headache. Thanks again.
Hey JP - glad it was helpful!
And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
You made it looks easy bro!
Good video 👍
Hey Andres - thanks for the feedback! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Love the videos! Thanks for doing them. Right to the point and very easy to follow.
Glad it was helpful!
And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Thank you
Thanks very informative
Glad it was helpful!
You make the best diy videos! Thanks for all the help getting through these projects. You've saved me many times!
Hey joejunior1974 - thanks for the kind words! I’m so glad the videos are helpful :)
Great video man....thanks
Hey tripp_hpjunkie - glad it was helpful!
Saved me sooo much time. Great work!!!
Hey Scott - I’m so glad it was helpful, and thanks for the kind words!
If you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Has anyone else had the new clutch cable come in, and it doesn’t come with the full two piece yellow housing? Only comes with the top portion. I got mine all put together thanks to your video, but the aftermarket small yellow housing doesn’t snap into the big yellow housing like the stock one. I don’t think it will matter as it is held by the cables but, if someone could help that would be awesome! Great vid
Hey Jeremy - the complete yellow housing should be on the upper clutch cable, and then the lower clutch inner cable has a ball end that is held captive inside the yellow piece. Are you seeing something different than that?
Exact video I needed for installing my bars. Thank you very much
Hey Bren - glad to hear it, and thanks for the feedback! If you want a channel sticker send me a DM on Instagram with the mailing info @RonsWorkshop
Hi Ron, love this video thanks a lot and I might start to replace my FXLR APE Handle Bar and also love your other video thanks again
Hey Satyo - thanks for the feedback - let me know how the projects go! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Thank you! Awesome breakdown
Hey Kevan - thanks for the kind words. I'm glad it was helpful!
Thank you!. Exactly what I needed today...
Hey Zippity Dooda - thanks fir the feedback!
If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Great video,Ron THANKS
Hey Jack - glad it was helpful! I’ve got another video about the friction zone and how the clutch hub adjustment range affects it: czcams.com/video/xnD6rnGf5oI/video.html
And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Thank you for the info. Great video as always.
Hey Robert - thanks for the kind words! Glad it was helpful.
yes - and those tabs and little clip things- they won't ever dry out, become brittle and then break off when you even slightly try to move them. Nope- no way.
Harley couldn't figure out how to make a reliable and trouble free hydraulic clutch so now we gotta deal with this thing. ?????
Anyway- thanks for making the video; wasn't ranting on you. Ride Safe Everybody.
Hey lynskyrd - no offense taken! you’ve raised good points for sure. So far the two-piece cable has worked well for me, but others have had trouble.
So I’m about to try and do this, I’ll let you know🤞🏼
Please do!
@@RonsWorkshop First off I appreciate you and your page!! So why does this keep popping out? I thought it was the top half of the cable but maybe i just need to adjust the clutch as per your other video?
Hey Jeff - thanks for the kind words! Is it that red button down at the adjuster that’s popping out, or something else? And how many miles since the last clutch adjustment?
@@RonsWorkshop Dude you are the man! Went to adjust the clutch as per your video and that nut was one thread away from trashing my clutch! You and your videos are great and I'm a fan for life man! Thank you I'd love to send pics and vids if you'd like?
@@jeffparker8476 I'm so glad to hear that - and thanks for the kind words! You can send the pics to @RonsWorkshop on Telegram, Instagram or Signal, or get the email address by visiting the the channel page using a desktop computer (czcams.com/users/RonsWorkshopabout) then clicking on "View email address" - I'd put it here but CZcams strips out email addresses.
Thank you so much.
My pleasure! I’m glad it was helpful. If you need any info on doing the clutch hub adjustment you can check this video: czcams.com/video/xnD6rnGf5oI/video.html
Wow super fucking detailed and excellence in editing for this video. earned my sub my dude! Needed a visual guide for adjusting stuff on my fxlrs. Thanks again ron
Hey Jacky Lin - thank you for the kind words! I’m so glad this was helpful.
Great work champ👍
Hey I Singh - thanks for the kind words! I’ve covered the clutch hub adjustment and friction zone in a recent video as well. If you ever need that, here’s the link: czcams.com/video/xnD6rnGf5oI/video.html
And if you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Great information very useful
Hey verne_141 hughes - so glad it was helpful! I’ve also covered how to do the adjustment down at the hub if you ever need it: czcams.com/video/xnD6rnGf5oI/video.html
Great video, thanks!
Hey YoungGunz - thanks for the kind words! If you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Super helpful man preciate it
Thanks for the kind words! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Looking for a video on how to Lube the cable with this style adjuster Please help
I like a graphite lube like this one. I let it run down the inner cable from the top, until it comes out below. No risk of it getting gummy or sticky. amzn.to/458zLOf
Great video
Hey Ted - thanks for the feedback! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
I can’t get the ball back into the retainer after re routing my clutch cable, but I haven’t taken the lever off, do I have to go reinstall it?
Hey Cunningham - yeah, that's the tricky part for sure. I think I had the top end of the cable hanging free when I reconnected it down at the yellow adjuster. But even if I didn't, it would definitely make it easier and give more to work with. Let me know how it goes...
This is what I needed, because I just recently experienced some issues with my upper Clutch Cable inner liner crumpling up towards the lever causing a clutch slippage feel.
I just want to ask if you or anyone ever experienced this, and what did you do?
I have a 2019 FXDR114..... and first thing tomorrow, im going to do what you showed and replace it myself....!! Its better than waiting 4 weeks to see a replacement part arrive to our local Harley Shpp 😩🤔
Hey Mēģģët pAńGiE - glad this was useful for you! I haven’t had any problems with the liner. Let me know how it goes when you tackle it and if you want a channel sticker send me a DM Telegram or Instagram with the mailing info @RonsWorkshop
@@RonsWorkshop FoSho! 👍
Was there a reason you had to replace your clutch cable?
I needed a longer one when I went to the ape hangers.
I know you get a lot of request, but I have yet to find a video on removing the rear tire on a 2018+ Heritage. A lot of stuff looks different from the 2017 and earlier models.
Hey Doug - thanks for that suggestion! I’ll definitely consider it.
Hey Ron been a While!! No one seems to be asking a very important ?-- How do you measure the upper cable? I'm thinking that it is from the bottom plastic to the pinion hole. Is that right? Brian
Great question - but I don’t have a good answer. The did mine the hard way, trying three different lengths until I found the best one. Let me know if you find the proper method!
Do it on a model with lower fairing 😅.
Then tell me how great the new clutch cable is!😂😂
🤣 point taken!
Hey ron, seems like the ridges on my red clip is worn out and when i put tension on the spring and squeeze the red clip to lock it in place, the stem just releases on its own and doesnt stay locked with the red clip. Would this be a problem?
Hey zephyrboy69 - well, it could be. You could slide the the black cover over it and test it out but it could be a bit risky. In the video description I’ve listed the Harley part numbers for the red clip and the yellow adjuster in case you have to replace either of them. Let me know how it goes.
Yea i tried to install it with two zip ties holding the red clip tighter. As soon as i pulled the clutch it collapsed again. I will have to get a new red clip. Let you know how that goes
Fuck yeah! So easy 👍🏼👍🏼
I had to buy the upper clutch cable for my 2019 Softail but couldn't find information on how Harley Davidson determines the length of the cables they are selling. Help would be appeciated.
Hey THE_ELECTRICIAN - ok, so this *should* be a fairly accurate way to measure the UPPER clutch cable. I measured mine from the edge of the clutch perch to the bottom of the red clip on the yellow part to get a measurement that matches the specs on my upper clutch cable. Let me know if this helps.
Ron, I bought the Magnum upper clutch cable and it does not have the yellow housing coupler. Can the yellow coupler come off the old and go on the new upper clutch cable?
Hey Donald - I don’t think so. The yellow adjuster is attached to the lower clutch cable, and there’s a coupler inside that connects the upper and lower cables together. I’m guessing the Magnum cable is the one-piece style?
@Ron's Workshop I think you are right. This will be the first time switching out a clutch line. Put on 16 inch apes. Already replaced and rewired the new bars just have to switch out clutch and front brake lines. Thank you for your response!
Let me know how it goes! You’ll need to remove the clutch side cover to swap it out but it’s a pretty simple process. And I love my apes!
@Ron's Workshop Will do brother!
Tired and waited for 3 months for a new upper cable from Harley. Gave up and bought old type cable online.
That’s so frustrating. Well, I’m sure the old style will work well. These supply chain issues are a pain for sure.
I am planning on adding 5.5in pull back risers to my 2020 FXLRS. The risers require a reroute of the clutch cable from inside the triple clamp to outside. Do you think I will need to completely disconnect the upper clutch cable from the assembly in order to reroute it?
Hey benjieswork4me - it’s probably easiest to remove the pivot pin at the lever to disconnect the cable and then reroute it. The only hassle with that is the little circlip on the pivot pin, so get the pliers if you don’t have them. Removing the top end is easier than disconnecting the bottom. Is the stock cable long enough to use the risers? You might need a longer one.
Ron could you tell us what brand and model is the Snap Ring tool you are using for the pin, I swear I’ve ordered cheap and descent ones but the tip sizes are always to big. If you have a link that would be great. I always use a needle nose pliers.
Hey @dino5254 - I'm using the Lang 1421 pliers and so far they are great. I've been using them for years. Here's an amazon link: amzn.to/39WbWwA
If there is no play how to loose the cable ?
Hey Jose - you release the tension down at the yellow adjuster. Pop out the red clip, compress the spring, and snap the red clip back in to leave the cable loose. Let me know if that helps…
I have a 2021 HD Lower rider s. I installed 8 in pull back risers, keeping stock bars. So I needed a longer clutch cable. Magnum said I needed a 6 ft new clutch cable. So I ordered it. That thing goes from handlebars down underneath the bike and around reaching to the clutch compartment on right sight of bike. But why would I need to drop the tranny fluid and open that compartment up to add that in when I’ve got the quick release up by the front of the bike? Wasn’t that the whole purpose of HD adding that in there for convenience? Not sure how they would’ve gotten confused but I just assumed they knew what that bike needed after I told them all the parts that I bought and what I was doing. Could you confirm if I need to send that long clutch cable back and get a shorter one that only reaches to the quick release from the clutch lever on the handlebars? Simple measurement to me would solve the issue and let them know it magnum
Hey GreenHouseMortgage - you are correct in that the new two-piece cable makes it really easy to swap out the top half for bar changes, etc. it sounds like magnum sent you a traditional cable. That may be that HD is the only one making the new two-piece parts, but I have no idea. If you click “show more” on this video description you can find a link to a chart that shows the upper clutch cable lengths and part numbers. That’s what you’re looking for. Let me know if that helps and what you end up with.
And if you want a sticker send me a DM on Telegram, Instagram or Signal with the mailing info @RonsWorkshop
Those levers are awesome! Do you know what brand they are? Thank you for the video!
Hey Blake - those are Lucky Speed Shop 6blocc shorty levers. I really like them a lot and did a video series on them - here’s a link to final video in the series: czcams.com/video/kzVcvNa64Qs/video.html
@@RonsWorkshop thank you!!
Would this be the same for the fxfbs? I can't seem to remove the coupler on the stock upper cable in order to reuse on the aftermarket longer clutch cable. Please help!
Hey Warren - I think it is the same but I haven’t seen it firsthand. Do you see the little metal tab that is bent down over the top of the cable ball end? It can be a bit fiddly trying to get it to release after you bend the metal tab up.
@@RonsWorkshop Yes, I see the metal tab and I was able to use it to detach the two cables but the coupler doesn't seem to be removable from the upper cable.
Did you remove the coupler to reuse on the aftermarket upper cable? I'm starting to think I may have to replace the entire thing.
Ahhh - there are a couple of plastic fingers at the bottom of the yellow part. Gently pry them outward and once they release you can remove it. I think there are two of them.
The yellow part is part of the upper clutch cable and it snaps onto the lower clutch cable.
Questions I have a 2021 road glide. And they came out with clutch cables instead of hydraulic clutch. If I wanted to install 16in ape hangers, could I do this top cable change out?
Hey Mrchevy305 - from what I can tell it looks like it's the same two-piece clutch cable that you see here in this video, but it looks like on the 2021 Road Glide the adjuster is on the right side of the frame. If you find that adjuster, pop the clamp off the frame, and slide the plastic cover up you can check out the yellow adjuster. If it looks like what you see in the video you should be good to go. Here's a link to the different length upper clutch cables that work on the softails (presumably the same for yours): cimg2.ibsrv.net/gimg/www.hdforums.com-vbulletin/779x804/upper_cllutch_cable_2_2d51a93c44bf296d0812a88a5aaba8055b38afb7.jpg
Hi Ron, did you also adjust the upper breake line in order to fit the ape hangers.
Hi Matthias - I ordered a new Spiegler brake hose that was the length I needed.
@@RonsWorkshop Thank you
Hi Ron, thank you for the great Video. I changed the handlebars on Ma Street Bob 2020. Now i need a shorter Upper clutch cabel. How do you measure the length of the cable. From the outside Clutch Handle To the end of the yellow plastic+ black plastic? Best wishes from Germany
Hey Matthias - ok, so this *should* be a fairly accurate way to measure the upper clutch cable. I measured mine from the edge of the clutch perch to the bottom of the red clip on the yellow part to get a measurement that matches the specs on my upper clutch cable. Here is a list of upper clutch cable lengths and part numbers - let me know if this helps: cimg2.ibsrv.net/gimg/www.hdforums.com-vbulletin/779x804/upper_cllutch_cable_2_2d51a93c44bf296d0812a88a5aaba8055b38afb7.jpg
@@RonsWorkshop thanks a lot, i will try it 🤗👍🏻
Can you use any longer clutch cable or did you have to get one from harley to replace the top half?
Hey Kevin - I got a Harley upper clutch cable that was long enough. It took me three tries lol. In the video description I have a link to the list of part numbers and lengths for the upper clutch cables. I’m not sure if the bottom end down at the cover is the same as the previous models or not. If it is then you could use the previous one-piece cable in the right length but I have no idea if it’s compatible.
@@RonsWorkshop I just waited 4 weeks for my local HD stealership to get my parts that were on "backorder" got there and the tried giving me a brake cable and clutch cable from L.A. choppers that I could've ordered weeks ago. They seemed confused about it being a new clutch cable ... idk .. i just want to ride again 😪
Man that stinks. I hope you can get it sorted out soon. Let me know if there’s any more info I can provide.
@@RonsWorkshop who did you get the clutch cable from I guess is the biggest question
My local Harley dealer. They had to order it but it was no problem.
The new design is kind of dangerous for rookie bike wrenchers, be careful.
thing came lose on me after changing to some shorty levers, bike almost went through the garage..lol
Hey Dexter - dang! Good reminder to be diligent. Glad you didn’t have a serious problem!
Are those HD part numbers?
Hey Ed - yep, the part numbers on the clutch cables should all be HD part numbers.
@@RonsWorkshop awesome man! Thank you for the video... i'm getting ready to do my 22 and never messed with a clutch cable like this, i'm old lol
My pleasure! And you’re not old…just well seasoned! Let me know how it goes.
@@RonsWorkshop lol!! Yes sir!
My cable broke somewhere under that plastic cover the other day. Not even at 200 miles yet on the bike. Curious as to what part failed or if it wasn’t installed/adjusted correctly. I was lucky that I was in my neighborhood already so I rode home in 2nd and popped it into neutral in the driveway.
Hey Jeff - that’s strange! I wouldn’t expect anything like that. Let me know what you find if you get into it. I wonder if it broke or just came disconnected at the coupler between the upper abs lower cables. Glad you were close to home!
Hi Ron my bikes done 230 miles only I went to put on my Oberon clutch lever followed all your instructions that are very clear thanks when I went to engage a gear the clutch was not clearing tried the adjustments numerous time no good put my original lever back on still no good any ideas
Thanks Paul
@paulbodypumper1 did you release the red clip and let the spring expand, and then snap the red clip back in once it was fully expanded?
Yes Ron I did this on the new lever I was trying to fit about 6 times then I came across we’re you said you had trouble so I put my original one back on still dragged the clutch tried the adjuster loads of times still the same it’s strange ??
@paulbodypumper1 yeah that is strange. I’m not sure what is going on. It’s the same clutch cable, right? And you didn’t make any changes down at the clutch basket?
New here. 2019 heritage. Putting on 14in apes. Sure question asked stock upper clutch cable not on chart. Don’t want too much cable sticking up. Will 40in work for my application? Keep up the good work. Thank man
Hey Gary - I’m using a 46” upper clutch cable with 17” apes. If you like that length based on the way my bike looks you could go with 43” upper.
Thanks for the feedback! If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
Thanks Ron .the quick reply very helpful and appreciated greatly.
Hey there Ron,
If I want to replace my upper segment of my black color clutch cable , from the lever just to the yellow part , and change it for a braided one (for example), is it doable?
I mean , do they sell the upper part alone (from the lever to the yellow plastic? If so , please guide me to the method my friend.
Thank you in advance 👍👍👍
Hey there! It looks like Magnum makes several different braided upper clutch cable options that are compatible with the two-piece system: bit.ly/3OoA0KU
Let me know if decide to try one!
@@RonsWorkshop
I will Ron . Thank you my friend 👍
@@RonsWorkshop
Ron , I found it at Dennis Kirk’s , I have installed a 16” ape handlebar dominator on my soft tail standard, so I ordered a 50” one , it says it fits my bike , let’s see how it goes. 👍
Sweet! Definitely let me know how you like it and how well it works with the lower clutch cable.
@@RonsWorkshop
Of course 👍
I made a mistake today trying to pluck out the red clip. I put too much pressure on the yellow plastic piece and I cracked it. Any ideas besides the dealer where I could get one?
Hey PaullyBB - hmmmm. I’m not sure. It doesn’t look like that pet is available separately. Maybe you could snag an upper clutch cable from eBay? I’m also not sure if you can remove that part from the cable, but my initial guess is that it may not be possible. Let me know what you end up with.
@@RonsWorkshop I called the Harley Shop nearest to me and they do sell them for just a couple of bucks. Thank you for your help!
@@DazedNConfuzed58 That's great! I'd love to have that part number for future reference. Can you reply with it once you get the part?
@@RonsWorkshop I'll post it here for ya Ron. You can call me Paul.
@@RonsWorkshop I have the part number you requested. 37200396 This is just the outer shell for the clutch cable assembly.
Can a one-piece clutch cable be used to replace his crap?
Hey Mike - yes, as I understand it, the "old style" one-piece clutch cables will work just fine. Let me know if you swap it out!
hey man i just came across your page and subscribed great video i am in the process of new handle bars on my fxlrs and cannot find an extended upper clutch cable like the one your running. do you have any suggestions. the only thing i can find are full cables. thank you
Hey John - welcome to the channel! You’ll find this handy - it’s a list of Harley OEM part numbers for the various upper clutch cable lengths:
cimg2.ibsrv.net/gimg/www.hdforums.com-vbulletin/422x435/upper_cllutch_cable_2_2d51a93c44bf296d0812a88a5aaba8055b38afb7.jpg
Let me know if that helps. If you want a channel sticker send me a DM on Instagram with the mailing info @RonsWorkshop
This link for these cables is exactly what I was looking for, also replaces bars on the FXLRS, but now I’m perplexed as to the proper measurement of the cable. Any tips on if it is the cable sheathing, cable itself, down to the total end of the yellow adjuster?
Hey Ronald - ok, so this *should* be a fairly accurate way to measure the UPPER clutch cable. I measured mine from the edge of the clutch perch to the bottom of the red clip on the yellow part to get a measurement that matches the specs on my upper clutch cable. Let me know if this helps.
If you want a channel sticker send me a DM on Telegram or Instagram with the mailing info @RonsWorkshop
It did work actually. The stock cable is about 33”, so overall I went with a 42” cable which should be more than plenty for the 14” lan splitters I put on there.
Not gonna lie, I absolutely love this clutch set up now that I understand it. Can’t wait for it to come in. I really appreciate the support, your video and response helped tremendously, especially compared to the dealership.
Excellent! I really like the two-piece clutch cable too. It really makes things easy. Thanks for the feedback! So glad I could help.
I have a 2018 Fat Boy 107, it has ape hangers , I changed to a short riser and cable is way too long. I need the upper cable replacement to be 48 to 49 inches Where can I get just the upper cable, Local Harley shop says you have to buy upper and lower cables, ordered the cable they said was like the new cable, it came in wrong it was old style. Where can I get just the upper cable or both pieces if necessary. I mean the new style cable. Thanks
Hey Ray - check out this list of upper clutch cables - they are definitely sold separately! I went with 17" apes and the stock risers, and I am using a 46" upper clutch cable. Let me know if this helps: cimg2.ibsrv.net/gimg/www.hdforums.com-vbulletin/779x804/upper_cllutch_cable_2_2d51a93c44bf296d0812a88a5aaba8055b38afb7.jpg
@@RonsWorkshop Ron. Great video. Still confused with measurements have a 2019 heritage. The stock cable is not on the cable length chart. Put on a 14 in ape what cable would you suggest from chart. Thanks man
Hey Gary - I’m using a 46” upper clutch cable with 17” apes. If you like that length based on the way my bike looks you could go with 43” upper.
Keep the beard man looks way better
Lol the many faces of Billy “Street Bob” Thornton
I just used a string with a loop not
Hey Paul - That's a great solution! Thanks for sharing that. Sorry for the delay in responding - for some reason your comment didn't show up and I just found it.
@@RonsWorkshop no problem! I ended up picking up a drag specialties old skool cable and installed it. Sooo much better than that new style.
Ok great! Glad you got it sorted out. I like the two-piece clutch cables but some people definitely have issues with them.