UMA Racing CVT Pulley System

Lets go in depth on how and why our CVT Pulley Variator Kit and Springs improve performance. For product inquires and purchase, kindly contact our authorized dealers and distributors.
International : www.umaracing.com.my/global
Malaysia : www.umaracing.com.my/dealer

[@muhammadarshad-mt3qw]

Hai uma racing.... Blh bg video cara untuk Servis air filter uma racing yang betul? Kedai motor cuma tiup pakai air pressure jer.. Blh buat video.. Tq

[@kristoffertorres809]

Is the flyball ramp longer than the stock?

[@faris8734]

HONDA BEAT 110 SIZE 18X14 (13G) CVT pulley ada stock tak

[@hanshijrah8773]

when UMA Racing gonna make new superhead and blok 65mm for R15????

[@giantbean2527]

Mantap

[@wajdidizdiy168]

For avantiz?

[@bryan-rt9gm]

Im planning to change my pulley to this. It is required to change the center spring too ? If yes how many rpm. My engine was stock. Thanks for the answer

[@bordspogi3541]

Boss baka gamitin mo png daily use uma pulley... Naka lagay na RACING PULEY hndi tatagal daily use yan trust me

[@Fnh437]

For pcx 150 , ready ??

[@bimbimvelog2278]

Mau tanya bih buat beat starter kasar ada gak kalo ada saya mau beli

[@theikdhisann6629]

hello review for Honda click 150i/125i

[@oela.suriname]

I tested on my nvx 155 with the 10 grams. Rollers were too light. I mix 3 x 10 grams with 3 x 13 grams. Better torque en topend

[@nmaxtv7035]

i used uma racing pulley czcams.com/video/mH0z7OGEovQ/video.html

[@KibberShuriq]

The problem with mixing such different weights is that the heavier rollers are going to wear out much faster than the lighter ones.

[@yohanesangga2831]

Honda pcx 2018 ?

[@syifaiehanafi8016]

Untuk ego lc 125 ada ke?

[@ryan6958]

does this change the top speed for nmax 155 or it just reach top speed on a much quicker time

[@dimasadityo_]

with 10gr roller, it is more for acceleration than topspeed

[@nmaxtv7035]

see my vdeo on nmax czcams.com/video/mH0z7OGEovQ/video.html

[@akietsurvivor1986]

Where area

[@youtubenutzer6236]

Difference of the effect of stiff contra spring and changing rear pulley angle?

[@ImmortalShiro]

Stiffer counter/center spring makes you stay at "lower gears" longer, thus more torque from a full stop. This is good if you're a heavier rider or someone who carries a lot of things. Honestly, you shouldn't change your springs if you're engine isn't modified. Just change the flyballs/rollers as much a possible.

[@delemosrojen_3-pt824]

more vids about your product plss

[@nmaxtv7035]

my nmax used uma racing czcams.com/video/mH0z7OGEovQ/video.html

[@pattayakamagra8325]

What degree angle is the pulley?

[@neoseven4201]

Secret

[@fordanykey]

If I only use rollers 10g what happen? Could everyone tell me please

[@nmaxtv7035]

see my channel, i use uma racing on my nmax 155

[@cozy2300]

Give some advice for avantiz ?? Bro

[@nmaxtv7035]

modify pulley czcams.com/video/mH0z7OGEovQ/video.html

[@oela.suriname]

which is better? Malossi MHR CVT or Uma Racing CVT??

[@nmaxtv7035]

i use uma racing variator, u can see my video..

[@oela.suriname]

I just finished testing the Uma Racing pullykit on my NVX 155. And I must say..waw!! my bike is now a beast. great perfomance!

[@nmaxtv7035]

@@oela.suriname nice bro👍

[@joaosidonio7562]

whats the max hp and RPM?

[@nmaxtv7035]

czcams.com/video/mH0z7OGEovQ/video.html

[@putrakaltim7044]

yamaha lexi

[@nmaxtv7035]

yamaha nmax czcams.com/video/mH0z7OGEovQ/video.html

[@BuanaNandang95]

czcams.com/video/tFACpj8TdPY/video.html
Mantab gan mtor gua jdi tmbh top speed