Video není dostupné.
Omlouváme se.
Aillio Bullet ventilation
Vložit
- čas přidán 19. 08. 2024
- Aillio Bullet ventilation setup
S4 fan www.amazon.com...
90 degree elbow www.amazon.com...
Blast gate www.amazon.com...
Flexible ducting www.amazon.com...
Duct connectors www.amazon.com...
Semi-ridged duct www.amazon.com...
Elbo www.amazon.com...
4 inch to 8 inch duct adapter www.amazon.com...
45 degree duct splitter www.amazon.com...
Дякую за змістовне відео. Це для мене - як приклад. Успіхів !
This is very helpful! Thanks for including the links, too.
Great idea and perfect execution!
This looks amazing. Would you please share how did you set it up, and where does the end of the duct go?
This is gold, thank you so much! Any tips on painting the ductwork?
Brian, I powdercoated the joints. czcams.com/users/shorts3XOJS_4_Qbw?feature=share
@@miketread8185 Wow that's amazing, I've never done that before, thanks!
Waiting for my Ailio to arrive. Could you share what that fan product is? and how well do you find it working so far? I've heard things about powered fans being too strong for Ailio's liking, but it looks like you're mitigating that by not directly attaching the inlet *onto* the Ailio itself.
Scott, I added some part numbers in the description. You're correct, directly attaching the duct, especially with a fan, can mess with the bullet. If you have not joined the facebook group "Aillio bullet R1 Group", I highly recommend it. There is a lot of good information there. This setup is working beautifully and I'm very happy with it. Enjoy your bullet, I've only had mine a few weeks and I'm loving it.
I’m curious. Is the S4 fan powerful enough for this operation? Or should I get the S6?
If my set up was the same as this video, I would say the S4 is enough. I have since replaced the fan in the bean cooler with a much higher CFM fan and it could use a larger vent fan. I may change it all out for a six inch setup.
Hi Mike, Love the work you did on this. Any issues with the exhaust gumming up your fan? I have seen a few people putting filters up stream of the fan to reduce the oils and whatnot. Also, did you make the bean chute?
I found the CAD files for the bean chute here.... www.kaffeewiki.de/wiki/Sch%C3%BCtte_f%C3%BCr_den_Bohnenauswurf I found an online place to cut this out for me. I've taken the fan apart a couple of times to blow out the fan. It comes clean pretty easily with compressed air.
Hi Mike, do you find that when the cooling tray fan runs, it blows air out through the splitter towards the roaster? I am seeing that issue, but I have a filter in front aswell.
I have not seen that issue. I usually just keep the blast gate cracked open a little with the exhaust fan on medium during roasting. Then open the gate all the way and turn the exhaust fan on high when I dump the beans.
@@miketread8185 thanks for the reply. I will try without a filter in front.