AutoCAD 3d Modeling | Learn How to Use Extrude, Loft, Revolve, and Sweep Commands in AutoCAD

AutoCAD 3d Modeling | Learn How to Use Extrude, Loft, Revolve, and Sweep Commands in AutoCAD | CADable | CADable tutorials
Welcome to CADable, where Engr. Ibrahim Omer will guide you through this Autocad 3D modeling tutorial. In this video, you'll learn how to use the extrude, loft, revolve, and sweep commands to create complex 3D models in Autocad.
We'll start with a brief overview of 3D modeling in Autocad, explaining how each command works and providing practical examples of how they can be used. Then, we'll dive into the details, showing you step-by-step how to create 3D objects using extrude, complex shapes using loft, rotational objects using revolve, and swept objects using sweep. We'll also cover the differences between solid and surface extrusion.
Chapters of the tutorial:
Introduction 0:00
AutoCAD basic settings 0:14
Extrude command example 0:54
Creating sketch for extrude 1:47
Joining lines to make close contour (polyline) 2:27
Making a solid extrusion 2:46
Surface extrude using lines 3:23
Loft command example 3:53
Creating sections for loft 4:23
Making a solid lofted body 5:07
Revolve command example 5:50
Creating sketch for revolve 6:23
Joining lines to make close contour 7:11
Making a solid revolve 7:28
Sweep command example 8:04
Creating sketch for sweep 8:17
Joining lines to make close contour 8:55
Making a pipe using sweep command 9:07
Not a good looking because of sharp radius (redrawing pipe) 9:22
Conclusion 10:14
This tutorial is perfect for beginners looking to gain valuable skills and knowledge in Autocad 3D modeling. We encourage you to practice along with us and use the play-pause technique to improve your skills. If you have any questions or comments, feel free to leave them in the comment section, and we'll do our best to answer them.
Remember, practice makes perfect, so keep practicing and applying what you learn to your own Autocad projects. Thanks for watching, and we hope you find this tutorial helpful!
#autocad3dmodelingcommands #autocad3dmodeling #solidextrusionvssurfaceextrusioninautocad #CADable #CADabletutorials
Follow our Channel:
/ cadable​

[@Quiet9012]

Thank you for explaining it well, now I understand more!!🎉

[@CADable]

Glad it was helpful!

[@margaritat9515]

Thank you very much for a very good explanation. ♥👍

[@CADable]

You're most welcome🎉

[@HIMKOGamers]

Nicely presented

[@CADable]

Thank you! Cheers!

[@ericdolo5011]

path extrusion, taper extrusion, ....

[@CADable]

We can create path extrusion which is called sweep and taper extrusion called draft.