AutoCAD 3D Loft Command Tutorial Complete | AutoCAD Loft Path | AutoCAD Loft Guides

AutoCAD 3D Loft Command Tutorial Complete | AutoCAD Loft Path | AutoCAD Loft Guides. This tutorial shows how to use loft command in AutoCAD step by step. All the loft command tool options such as path, cross section only and guides are covered. Shell command is used to create hollow part.

[@wf.d5076]

THIS WAS SUCH AN EXCELLENT GUIDE

[@CADCAMTutorials]

Thank you 😊❤️

[@bluetorch13]

English not being your primary language makes your explanations SUPER EASY to understand, English is also my secondary language and all your tutorials are excellent and simple! Thank you very much!

[@wamanwell-being2470]

I want to thank you sir from bottom of my heart....
It's because of you today I'm working in design in a Defence Company....

[@CADCAMTutorials]

You are welcome

[@yashgautam4874]

Where are you working brother

[@martinsomers8730]

@@yashgautam4874 In a Defence Company....

[@dhanalakshmiramamoorthy4824]

Tell name of the company

[@simpernchong]

I have used AutoCAD for more than 2 decades. Nice to see it still going strong.

[@mohamadzfr]

Such a great tutor 👍
Thank you so much broader 🙌

[@rocky8004]

Superb teaching sir ji

[@nipambarman3221]

This is so amazing that how u teach these tutorials in an easy way. ❤️

[@CADCAMTutorials]

Thank you

[@nazikmohamed]

Good Example for using loft command in solidworks,Thank you

[@kovabhuma]

Explanation is very clearly thank you so much 😊

[@chunkynugget]

Great video! Explained really well.

[@Fededilollo]

You deserve a medal, thanks.

[@CADCAMTutorials]

You are welcome

[@josephsegador641]

thank you for this video and its very appreciated to me for easy way

[@edmondo.6004]

Good & amazing tutorial. Thank you so much!

[@CADCAMTutorials]

You are welcome

[@claudiajanzen2564]

Thank you sir, your tutorials are easy and straight to the point! Now I'm a fan of this channel! =)

[@CADCAMTutorials]

You're welcome 😊

[@shanisahani2284]

great teaching n skills of autocad ...😍

[@EngineerWaelAhmed]

جزاك الله خير ياخوي
شرح سهل وسريع وسلس

[@dinogart2979]

Thank you very much sir, I'm from Indonesia

[@paulocintra7941]

Muito bom !Bem explicado, excelente exemplo de aplicação , ótima explanação e conclusão.Felicidades a todos .

[@balaramkona4717]

nice explaining sir thanks for supporting poor people like me,. we don't have to pay more amounts for training - i can start learning from your videos

[@CADCAMTutorials]

You're welcome 😊

[@sajjad3865]

You are best my teacher!

[@CADCAMTutorials]

Thank you

[@alicaliskan1685]

Thank you very much...

[@chandrakantjoshi.449]

3D Loft command is explained in very simple method.👌👌👍

[@CADCAMTutorials]

Thank you 😊. Please subscribe to get new video notificatio.

[@robertopascazi228]

EXCELENT!!!! Thanks a lot.

[@CADCAMTutorials]

You're welcome 😊

[@rowanmurphy5239]

Incredible! You may have saved a project of mine that was defeating me!

[@CADCAMTutorials]

Glad I could help!

[@shumailkhan6078]

Very helpful 👍

[@veeramareddisravani9743]

Perfect explanation and thank u

[@CADCAMTutorials]

You're welcome 😊

[@squirrelspown]

wow thank you
great tutorial

[@CADCAMTutorials]

You're welcome 😊

[@waiyanlinn8573]

Thank you , sir

[@carloscorreia7700]

when is good, is good!! TK

[@sadicoutinho581]

Muito boa aula continua assim Deus t abencoe

[@CADCAMTutorials]

Claro, obrigado

[@iktita]

good one my friend

[@purestress2597]

Pretty clever tool.

[@ayzrock]

thanks for the tutorial!!

[@CADCAMTutorials]

You're welcome 😊

[@Yavuz866]

Thank you a lot !!!

[@CADCAMTutorials]

You are welcome 😊

[@richiekong6843]

Thank you ❤❤❤

[@melvinhampton9029]

Very well young man

[@CADCAMTutorials]

Thank you.

[@Gustav_S_eyes]

Thank you 🙏🙏

[@nihalyusifova1582]

Excellent thanks 🙂

[@CADCAMTutorials]

You're welcome 😊

[@shreekatte]

Sir when i give path the line which is created by loft erases out. May I know why?

[@agnwstos2222]

Perfect. Helpful

[@CADCAMTutorials]

Thank you 😊

[@RameshSoni-cq7gm]

Thanks

[@nma6813]

Thanks to much

[@bb8219]

Ty❤❤❤

[@andrei9115]

Yeah sure! It looks so easy when you master are doing it but in practice is much more difficult when it comes to spline! Loft command is maybe the easiest and most straightforward 3d command but when you have to extrude or loft on a path is very difficult when you have to change the XY plane in space. I found the easiest method to be the new ucs, then select x and y axis according to the plan you want to draw into because this way you will have only two axis to look after and dont have to pay attention to the z axis, using left, right, front, back...etc looks much more difficult to me! I am just a beginner in AUTOCAD btw and the extrude/sweep along a path seemed the most difficult thing to me so far! Nevertheless you are a genious! Can I email you a 2d plan building which made my Autocad crash in 2 versions (2017 and 2021) when I tried to press pull the windows? I've tried it on my desktop as well and autocad froze again, the drawing is pretty simple with only 4 rooms, I dont know why Autocad is acting like this. Maybe you can help me figure it out. Thanks alot in advance! Keep up with the good work!!

[@haidartaher17]

May be it's too late as a response, but I think you to make sure that all the 2d drawing areas are fully closed using boundary command, then make sure that z axis is in extrude direction using ucs command.

[@omarcornette7999]

thank you so much

[@CADCAMTutorials]

You're welcome 😊

[@frarukabdulla7699]

Superb 👌👌👌

[@mdfaiyazuddin7738]

Raj Sir it reminds me of your class in the very beginning

[@ALAMKHAN-ky4ef]

Bahut khub ❤️

[@CADCAMTutorials]

Thank you 😊

[@truemessage7069]

thanks

[@gussindra9378]

Good illustration

[@bigcaschrisannsolsona2236]

Thankyouuu 😊

[@CADCAMTutorials]

You're welcome 😊

[@rayansaab968]

good keep going

[@babaymukherjee3119]

Thanks sir 🙏

[@CADCAMTutorials]

You're welcome 😊

[@mrnomore]

Thanx. is there no Twist for Loft?

[@joaohenriquevolpinimattos5117]

How to control the surface density in LOFT command ?

[@calciomercato_news]

Gooooood... From Italy

[@CADCAMTutorials]

Thank you 😊. Please subscribe to get new video notification.

[@RajeshKumar-yh4dq]

Please make more videos in solidworks and catia

[@vasudeokatdare6530]

Good !!

[@CADCAMTutorials]

Thank you

[@vijaysinhchauhan8696]

Tanks

[@lach0125]

great video

[@CADCAMTutorials]

Thank you 😊

[@mech0797]

Bro please make videos about CNC simulation

[@Squalettoblu75]

eccellente

[@CADCAMTutorials]

+Squaletto blu Thank you

[@malemalevich2672]

Ору с этого акцента. Индусы - топ!

[@blacknote5022]

Good

[@shrikantbidgar7132]

Wow

[@CADCAMTutorials]

Thank you

[@samiranjana2083]

can you tell me sir why, I cannot make object like you ,it is showing--" The selected entities are not valid, "

[@jeaacuesta5063]

Why mine doesn't have shadow when I used loft command

[@NicolaeComan]

I cannot do command LOFT over a path. It appears "Selected entities are not valid." What is wrong?

[@NicolaeComan]

Oh, I see! I've forgotten to JOIN the portions of the path.

[@nakiryajustine3841]

I SOMEHOW FAILED ON THE SHELL COMMAND. BUT I HOPE FOR THE BEST AS I PRACTICE MORE

[@habibacil7716]

Hi, How do you join or unite 3D array with 3D solid object?

[@CADCAMTutorials]

Use UNION command

[@habibacil7716]

@@CADCAMTutorials does not work, I tried union, join but nothing. it says "at 2 solids, surfaces, coplanar regions must be selected"

[@CADCAMTutorials]

Explode 3D array and Union

[@habibacil7716]

@@CADCAMTutorials sorry to bother you but still it does not work. is there any other way?

[@deaftodd]

Which windows version are you using?

[@CADCAMTutorials]

Windows 7

[@dodouniquelife9725]

How to Find These Volumes???

[@amarkant268]

5:00 after selecting path it say not valid.. What should i do now

[@CADCAMTutorials]

Don't use very complicated path

[@sahilchhapola1125]

sir esme jo rectangular lofted part h uska devlopment kese bnega

[@CADCAMTutorials]

Uskeliye aap ko solidworks ya phir dusara 3D software use karna padega
czcams.com/video/AfpXTTi0R7U/video.html

[@sahilchhapola1125]

@@CADCAMTutorials sir two step lofted and only rectangular shape not circle

[@debedabkilen2786]

path and guides doesnt work for me. btw im using 2012 version

[@CADCAMTutorials]

Try to create less complicated path and smaller section.

[@christopherbrown5338]

As the rest of the world is using parametric software

[@Loveanimals193]

Can you l
Teach me AutoCAD ?

[@mistervictor9078]

ГОСПОДИ ХРАНИ ИНДУСОВ

[@aminsaputra7134]

CONTOLL

[@bhuvaneshd7143]

Thanks

[@arielsharon8694]

Thanks

[@CADCAMTutorials]

You are welcome