3D modelling impeller in AutoCAD
Vložit
- čas přidán 14. 04. 2014
- Learn AutoCAD in a step-by-step way with more than 26 video lessons with quizzes and practice exercises for free here sourcecad.com/courses/autocad...
Autocad 3d tutorial for 3D modelling impeller.
Learn AutoCAD in a step-by-step way with more than 26 video lessons with quizzes and practice exercises for free here sourcecad.com/courses/autocad-essentials-course/
instablaster...
Your accent is just fine, don't worry about the people who say otherwise. Keep up the good work.
William Schlanger Thanks William for your appreciation :)
Thank you very much.Your expression is very good.l understood very good. Oktay Tekin in İstanbul
Nice explanation dear sir
And also this is a good work to provide trainings to other whose not able to trainings centre and lack of time.
Great video!! Thanks
that was genius way to draw that curve, as you have perfect controcl over geometry of the curve evnthough it takes little more time to draw. thanks for idea and uploading this nice video.
123kkambiz Thanks again for your encouraging comment friend
good explanation.. thanks a lot
Excellent video, thank you.
Jake Collins Welcome Jake :)
it was very useful for me. thanks
Azam Bakhtiari I am glad it helped you, keep watching for more :)
thanks for the video,s ....
very helpful
Best for NEW USER
nice job
Thanks a lot .
hany daoud Welcome hany :)
Whenever i try to draw it there's some space inbetween the fin & the cylinder when seen from behind how can i prevent it from happening
nice job i like it
Thanks Farman
Very nice explan
Nice video
JUST WANT TO KNOW.... STH. I USE AUTOCAD 2019 AND I CANT CREATE THE SURFACE NETWORK THING. ANY REASON WHY?
for this impeller the big plat eshould also be deleted .. the flow should be axial without any obstacle .. thank you
Great video! Thank you for making them, I'm learning a lot from your teaching! Do you make money off of CADD or do you work with it for fun?
Thanks Justin
If it was even a chance to see the product in motion,how its behave and working with other components..
muy buena el tutorial espero q lo hagas en espanish
Gracias Angel
There is no Surface tab in my version Autocad 2010,so I was unable to complete the surface part .where could I find it or any command for surfacing those kind of objects.
+ABDUL JAFAR Are you using AutoCAD LT? AutoCAD LT has limited capabilities and its probably the reason you are unable to see 3D ribbon. Moreover if you have full version AutoCAD then you can turn on 3D tabs by right clicking in empty space of ribbon and selecting the required ribbon from contextual menu.
Nice explan
thanks.
nirav panchal Welcome Nirav
Once the fins have been turned into a polar array how do you get them to connect with the base and cylinder using the 'union' command. Mine wont work.
klrhc2 It might be due to associative array, select fin after making an array and write X in command line and press enter.
then try to make union let me know if you still have problems
It worked!!!!! Thank you very much!!!!!!
Welcome :)
SourceCAD Thank you very much! I had the same problem, I couldn't union the array with the base and cylinder. Just selecting fins and them command x (explode), the union finally worked!
I am glad it worked :)
merci beaucoup
autocad 2007 not used networking command....how to use another command
can i make small money with this basic methods that will be helpfull if there is any website tell me
thanks...
you're welcome :)
When I try to do the lines at 5:15 , it forces me to connect the horizontal lines to the endpoint of the vertical line. How do I unlock it so I can put the lines wherever I want?
I have Node 'on' in the OSNAP menu by the way.
Lucas B you can turn off OSNAP temporarily by pressing f3 to avoid snapping at unwanted points moreover you can also select a command then press SHIFT+RIGHT CLICK a contextual menu will appear select point which you want to snap and only those points will be activated for snapping.
SourceCAD great. Thanks!
Welcome Supafly :)
very will
Nice
I did all this steps but when I started to make union it doesn't work , how I fix this knowing that I turn on OSNAP !what's the problem
good job , i guess now inventor is much better than autocad for mechanical drawings and much easier
Ahmad Muammar yes inventor is definitely better at modelling mechanical designs but AutoCAD still holds its monopoly in 2d drafting :)
whats the difference between pull option and extrude option??
prudhvi sriramula as far as AutoCAD is concerned there is no PULL option although PRESSPULL option is present and if you want to know difference between them I suggest you to go to this video
czcams.com/video/uiVVxWsJPVM/video.html
yeah, its presspull and thanks for the explanation in the video dat was so clear and easy to understand.. and all of your videos are very usefull and easy to pratice by own.. a suggection by my side is make sure there is no noise in your videos.
thanks once again.
prudhvi sriramula I am glad that it helped Prudhvi, And thanks for your suggestion my old videos are a bit noisy but all my new videos have clear voice quality.
good
for some reason I cant get my " union" to work
***** for applying union you need to first use THICKEN command on fins and set some thickness to it and also make sure that central cylinder mates (intersects) with fins.
If both the methods fail try this
select array of fins and press X then enter then try to UNION (associative array objects cant union this might be the case)
not able to create network. Can annybody help make me out of that?
how to make network in autocad 2008??? i'm stucked!
Annisa Maharani I am really sorry Annisa but I never used AutoCAD 2008 my first software was 2010 I might not be able to answer this but you can always check AutoCAD forums for quick answers from users of older AutoCAD versions.
Dear sir thanks for this video .sir can tell me water pump impeller how to draw in 3d
welcome Naveed, I will upload water pump impeller video in my coming tutorials... keep learning
Thank you very much
SourceCAD
naveed akhtar watch this video it is lot similar to water pump impeller Autocad tutorial CPU Fan complete 3D: Sourcecad hope it helps :)
Thanks
give me autocad suggestions
no puedo unir el impulsor con la base y me dice "hay que designar al menos 2 sólidos" help me!
Explode the array which you have made by selecting all fins and then type X and press enter. Then try using Union command again.
I had the same problem, Explode the array which you have made by selecting all fins and then type X and press enter. Erase all the base and create a new base ( same radius 20, extrude -2) then union command for all.
I don't know why, but it works... =)
Rafael Dang i will try this men!
Accent is fine.
Sound volume is totally missing.
WHICH AUTO CAD VERSION ?
2014? OR WHAT
hany daoud It is AutoCAD 2013
Very good. The noise is annoying, but otherwise, the content is good.
thanks for your intrest, it is one of my oldest videos in all my new videos sound quality is crisp and clear.
Wonderful!
Hi. I need help. I am still learning autocad. I was hoping someone could help me about making a an object. The object is tube and around the tube there are small holes.. The diameter of the tube is atleast 25mm and the height is 65mm and the small wholes around it is 2.5mm.. The space of the whole is 4mm. Maybe anyone could make toturial video.. Thank you.
hi
Yes irsnam, How can I help you?
English?
Luciano Junqueira Sorry could not understand?
nice job