WLToys 12428 Motor upgrade, Mods With speed run!!
Vložit
- čas přidán 9. 09. 2024
- WL Toys 12428 Trying out the goolrc motor 17T 8volts 2cell is more controllable 3cell is very fast and powerful wl toys 12428 RC car Fun
Motor I used
www.aliexpress...
Tires
www.aliexpress...
Tire spaces
www.aliexpress...
Guys please head over to the WLTOYS wipeout video and give it some Love :)
Nice bro
Hi! I have a question.. XP could you make a vidéo with bodys that can be used in this car? I would like to change thé body but i dont know wich one i could choose.. thanks a lot!!
@@dantetoscano2132 I not sure of any other bodys that fit sorry.
@@Imazdadrags dont sorry, thanks a lot
Nice setup 👍 I put a 3s brushless setup with all metal gears, a 25g servo and upgraded the suspension. Goes about 50 now and I love it
One of the nicest 12428's I've seen so far
Thanks its bit ruff looking now has a hard life lol still going strong.
So awesome to see that front wheel lift when punching out!
Great job...I love every part of this upgrade
that motor sounds NICE!!!!
Good job. Love the chrome😎
Very great upgrade indeed, it would be better if it were brushless instead of brushed. But I can't complain, it is 10$ very good deal right there.
Great job brotha,looks amazing! Awesome upgrades👍👍👊👊📹📹
WLToys would sell so many more of these if they stopped using that obnoxious green color!
That's one mean looking 12428!
This motor have more rpm than the original motor?
Dam That is like a mock 10 I have beenresearching battery conversions and motor upgrades for my 112 four-wheel drive truck and that looks pretty good that motor I've always wondered about it and I'm pretty happy with it now hate to see what my truck does I'm pretty much to do the same thing thanks for your awesome build 🥺
I replaced my rear drive shaft with a metal one because the plastic one broke in half and it’s really good
Best looking one I've seen 🔥🔥🔥
Locktight the motor area king !
Great video and nice mods. That steel body killed me. Just wondering does the brake works like the old motor?
Yea brakes still work,.
Hi nice mod, but always check the mesh and alignment between the pinion gear and the spur gear when installing the new motor! It seems that you did not do it and installed it blindly. I like the way that you operate the throttle when driving the truck. You manage it nicely, and not like most of the videos I watch, many people don't have an idea how to manage the throttle correctly. They just pull the trigger full on and blip it on and off, like it's either full or zero throttle. That is very hard on the gears, driveshafts, etc. Then they complain about broken parts Lol
Thanks for the tip, yea this truck is still running good and use it mostly on 3 cell so much fun!! like you said just gotta be a bit careful on throttle.
nice toy. liked and subbed 👍
Fantastic video, great ideas , good build and running video, liked and subbed you my friend well done 😁😊😁😊
Love it
It's a monster little thing! any issues about the tires? Mine keeps popping out of the rim.
Yea, I had to super glue the tires on.
What a beast man. I am just looking to buy one for me to. :D
Nice mod! I'm going to try it. The front suspension setup has way to much slop. It was my only pet peeve with this car.
By the way, I kept looking for your "springs" throughout the video, you kept mentioning, until I realized your were talking about the shocks...
Hey bro can u plz tell me if the new motor is faster than the older one with stock battery??
BTW u are awesome man!!
Thanks, Yea its faster.
Hey bro i want to know that 13t is better or 17t with stock esc and battery? Im so confused
@Ezra Redgwell im using 13 t now im confident about it now😊
@Ezra Redgwell You're wrong man. 13T is faster than 17T. The lower the 'T' number, the faster (and less torque) the motor will be.
Best video yet on this RC. Just bought the a959b and a969 and put all the metal upgrades on them and love them both. Van't go wrong with the price IMO and with the upgrades they are nearly impossible to break. Would you recommend this RC?
Yes I do Recommend it, great little RC. Diff does need upgrading to metal parts but its easy and fun to work on.
You can get the virhuck (fy03 clone) for only $40, now. It has metal body panels.
I have 4 of these things, now. Paint them different colors and try different hope ups on them..The diff is all metal gears. It only has a 390 motor...which makes it lighter than the WLTOY. I was thinking of just installing a 60A brushed esc so I can run 3s lipo in them..the motor can handle it. I have brushless 2850 in 3650
can size 3900kV..it's still going to be more powerful than a 2838 or 2845.
Or you can get brushless 2845 3000kv for only $12. It's not a big deal.
Im just afraid it'll tear up all the gears or drive train.lol
You can get a HSP/redcat volcano exp...PRO brushless version 1/10 for only $110 under Beseltek brand..It'll pop wheelies out of the box in 3500 mah 2s lipo...stock batteries it's do 30 mph....I installed a cheap $15 brushless 60A esc...run it on 3s....it'll pop wheelies on command..even on pavement. over
40 MPH..easy. It stupid fast for an R/C monster truck...
The faster you go....the faster you crash. the faster it breaks.lmao
I have just as much fun on the 979A
The 1/12 size just needs to do around 30 mhp ish....for it's size.
It's still plenty fun to drive around stock
the 12428 now comes with all metal diffs
Nice bro I'm ondway do like this
Nice job!
Which cell lipo you used
Zajebiście 100%
Awesome buddy
Hello man! Thanks for your vidéo, i'm french. With the New motor you have up the speed limite, is that? All is stock on your car ?
Yes that is correct stock esc just motor upgrade
@@Imazdadrags thanks you man !
@@Imazdadrags Your link is failed, the New motor is a goolrc 17T? Thanks again
@@Motardebase. oh yea link is old.. that is correct just do a search for it.
@@Imazdadrags perfect, thanks you so much
Does goolrc motor made a difference? Is it faster? O better? Thx
Hey nice setup. Was wondering about the wheels and metal panels. Nice work
Thanks, Metal Panels I made myself and the wheels are from Aliexpress I did need to glue the tires onto the rims. www.aliexpress.com/item/AUSTAR-4PCS-1-9Climbing-Car-Wheel-Tyre-For-1-10-Climbing-Car-Red-Color/32816160167.html?spm=a2g0s.9042311.0.0.9rIjUL
What wheels and tires are you using in this video?
Hi, link is in the description..
I just bought one of these and am happy with it. But, the question is. Is it better at low speed climbing rocks and dirt? I got this for dirt, how does this help when the going gets slow?
I have not done any low speed crawling so not sure sorry, Good question thought.
This is a great video, thanks for sharing! I'd like to ask. I plan to replace my motor as well to a GoolRC 540 80T Brushed Motor for crawling. Would I need to buy an Engine Mount and extra pinion gear to complete the upgrade? Or would stock engine mount and pinion gear do the job?
Thanks, I was able to use the stock Engine mount and pinion gear with this motor.. So id say you will be fine to reuse these parts.
I see, thanks! How was your experience in removing the pinion gear from the motor? Did it give you a hard time? Some people said it was stuck hard that they resorted to heating the pinion gear to get it to dislodge.
Luckily mine came off fairly easily.
The pinion on mine was stuck fast to the OE motor and not transferable to the new motor.
It's a good idea to heat it up first to melt the thread lock used from the factory. It'll save you a lot of headache with the head of the locking screw stripping.
You just plug that new motor straight into the stock esc? If so pretty sure the stock ESC isn’t meant for 3s I believe. Ran mine on 3s for a little and esc or motor started smoking not sure which but pretty sure it was the esc. In the process of going brushless, just waiting on the servo to get in but my new brushless motor and ESC is made to handle 3s so cant wait to see the speed boost.
The stock motor can smokeout some of them can not handle 3s because they have a black diode that can not handle extra voltage but the ESC seems to be fine on 3s. your new Setup sounds cool :) and prob is the best way to go.
GameHuntingNZ - Huh that’s good to know. Yea may have been the motor smoking couldn’t really see what was and just assumed it was ESC. Well either way thanks for the vid, might pick up one of these brushed motors for my GF’s son’s 12428. I’m sure it’s faster on 3s but how is it on stock battery? Still faster with the new 17 turn motor on the stock 2 cell lithium ion? Kid might be a little young to trust with LiPo batteries.
if you use the 13t, can it or no
nice video.. can i use a lower T Motor of these??? 13T/23T/80T/21T/27T/35T/45T/55T ?? bcz as i know low T values produce more power..
Ficou muito show amigo, a carenagem desse rc deveria vir dessa cor de fabricação👏🏾👏🏾👏🏾.
Foi necessário trocar o ESQ? Ele é o horiginal de fábrica ainda?
É a fábrica ESC
Hi. What battery do you recomend in terms of power, weight, duration, durability,...? Thanks.
Hi, do you think if I change it for 570 motor it will have more strength to climb? Or with 550 35T it will be enough? Help me
Hi, if you want more torque/climbing strength and have room you can try a 570 it should be better if you 550 is struggling,..
Nice video 😀. Is this motor faster than the original one even on 2s? Thank you
Hey bro, I’ve got into the hobby properly now and I’m revisiting this video, does the stock esc work with 3s?
It does seem to yes, but there is still a risk of damaging it. Also some of the stock motors have somthing on the back of them looks like a capacitor that can smoke out on 3s if it does u can just cut that off..
GameHuntingNZ cheers mate, very helpful 👍😀
I woundnt chance it I have one and it is enough on 2s and even it the esc could handle it the gears would be dust that is what happened to me but mine is all metal 3s 3600kv @39,960rpm
10k Subs with 0 videos thanks bud, I run different electronics in it now anyway but thanks 😀
Dan Gavin - RC videos damn that was a quick reply
GOOD LOOKING can the stock speed control use 3 call battery?
Wow you did a good job with it I love mine lol how did the gears hold up with running the big tires I want to do the tires on mine any info is greatly appreciated thanks
Its good, but the wheels are a bit weak they broke check my next video for the crash..
can i get the fpv setup that you are using right now? thank you
any steering stability issues? does it track pretty straight? mine seems to drift a lot. Did you change out steering parts? tie rods? to improve handling? I would love to know how to make mine more bullet proof.
Its not that good at going straight at high speed still mostly got original steering parts I did just add metal adjust tie rods
Sway bay the back to stop talktwist :)
Sway bar? prob not good for the off road though
does this engine have better torque than the original one? Nice vid!!!
sorry for the trouble I have mounted your own engine only that it is 540 55t but what battery I can put under you could you give me some advice thanks
Hi, a 7.4V 2000mah battery would be good something like this www.aliexpress.com/item/7-4V-2000mah-battery-for-Wltoys-12428-12423-L202-K959-RC-Car-Spare-parts-Upgrade-accessories/32811206276.html?spm=a2g0s.9042311.0.0.LMmtDp
High T is slow speed.. 55T is slow.
Low T is fast speed. 17T is faster
where did you get the metal body plates
Hi, I made them :) few years back. I have a 144001 wltoys now find it much more fun than this..
Hi !. The tires that you were using are awesome. Where can i buy some of those tires ? Thanks!!
Hi, Ive added it to the Description above, I also added spaces also in description..
I also needed to glue the tires onto the rims because they can come off easy
@@Imazdadrags Thanks Man!!😁
Hi. May i ask.. how about esc need to change too? Because brushed use 2 wire right . But to support battery 3s.. its safe fot esc stock?
I run 3cell on stock esc but it's not recommended
I see you can buy this motor in many options. How do I know which one is the best choice? Does the amount of "T" determine the speed?
Hi yes the lower the T number the faster it will be but it will be less torque so not good for climbing hills etc
@@Imazdadrags Oké, thanks for the explanation. I ordered the 17T also just like you.
Cool, I just got a larger battery lol so will make another video soon :)
how is the name of the battery to buy
Olá amigo, ficou top a modificação do motor, qual a especificação do mesmo? E parabéns pela carenagem em alumínio, ficou muito boa.
Hi, Motor is goolrc motor 17T 8V. Thank you I made the Aluminium panels.
da uma olhada nesse automodelo czcams.com/video/moFmDMiN6lY/video.html
Very smooth gearbox, still plastic or metal?
mix of plastic and metal parts.. also I filled that up with grease :)
What grease did u use?
bro what if instead of 3s ...i use 4s in that 17T motor and the ESC is not that stock one...is it fit or not?
La electrónica original soporta 3s?
It can but a bit risky,.. do at own risk.
@@Imazdadrags entendido, había escuchado que el mismo motor 540 es para 7v, y que tal se comporta con 2s con el nuevo motor? Tiene mejor desempeño?
@@elkikesays You can run a 7v motor on higher voltage 3s.. but it will shorten the life of the motor,..
Dañe el Esc del combo surpass hobbie con 3s 😔
Maybe you should of broke in the motor with 2s then 3s after
How many T has the original motor?
18t
Hi whaty battery do you have for your 17t engine? :)
Did you strip,all the paint off the panels or is that different panels
I made metal panels for it..
@@Imazdadrags very nice I'm going to be customizing mine as well thinking of puttine bigger rims and tires on it I ordered all the metal upgrades for it as well
im new to hobby grade rc entirely any tips since i plan to buy this and i have almost no idea what im doing the only thing ive looked into is batteries and im confused there too so
There is a better wltoys vehicle out now I can recommend if you like? When it comes to batteries best to get a proper genuine charger for them.
Fancy this one my 959.the brushless.way looks to expensive in my opinion.
So uprated motor and speedo if I get it to 40/45 mph that will do me
hello I'm sorry if it still makes me I took the engine like yours and the unit coupled but I do not want the original telecomanc tell me what I have to do to make them work thanks
Dont know sorry.
You'd have an easier time soldering if you added a little flux paste and tinned your wires.
Ficou toop , qual camera vc usou nele ?
@@valdiroliveira9394 Hi, it was a gopro hero 3 ;)
@@Imazdadrags haa sim ..ficou toop ..
Hi Can you just upgrade the motor and use the existing ESC and SERVO?
That is what I done yes, but if you want to go for a brush-less motor you would need to upgrade the ESC
So everything is stock except Only the motor you upgraded right? How about the esc and batt did they match with the voltage?
Stock esc seems to handle the extra voltage but if you do use 3cell need to be aware it could fry the esc or you may get away with it like me :)
So how long did you have this setup? Did it burn your esc?
About 2 years still going good, just had to replace the rear diff as the extra power it caint handle.
@@Imazdadrags thanks dude.. That's a cool setup you got there atleast a very minimal upgrade with a massive punch in power.. So you've changed every gear with metal?
@@kelvinerikgali7270 Yea metal gear rear I have heard they can still break but mines been holding up strong for awhile now main thing to remember is just dont full throttle it from standstill take off slow then punch it :)
Is there any possible way I can put a motor from a jjrc q39 highlander in the 12428??
Yeah but you make new holes for jjrc motor
Boa noite amigo qual bateria que vc usa com esse motor??
But unfortunately my 12428 got crash yesterday n broke body front bar n not working front gear Now it's only 2WD back wheels
Are those body panels metal?
Yes, aluminum I made them..
Que motor goolrc es más similar al original de fábrica?
El goolrc 17t tiene mayor RPM pero baja el toque?
That's GREAT man👌🏼😳 why does it say 17T? I've seen other motors with 45T or 55T what does that mean bro???
The lower number will have faster top speed, higher number is slower but better for hill climbing (more torque)
@@Imazdadrags thank's bro for answering my doubts ... now i know what to buy 👌🏼
Does your esc over heat and then cut out? Mine happens like every 5 minutes
No haven't had that issue, may need to try a New esc.
Are you running metal gears?
In the diff, Yes. :)
Where can you find metal gear for the 12828
I’m running metal in the back of mine
Where can I find a good esc for this car and a receiver for the stock controller I ordered a receiver and it wont connect
nice video of yo mods..I have some to let me know? if ud like to see my mods to ?
Essa bateria e 7.4 1500mah ou mais potente???
Can you break using this motor on the video it says 3cell ? I thought lipo or lion batteries can be 7.4 only at 2 cell no matter the chemistry?
2cell can only be 7.4 but I also ran 3 cell that is 11.1V there are even 22.2volt 6s batteries..
Oh yeah ik but so this battery you tested this model of rc after motor upgrade accepted 3s too? Did the receiver/esc got hot ? Do you now run this rc with this 3s battery have you encountered any thing bad with the performance of range ? Or do you get more run time ? How better do you feel this motor you upgraded ? Worth it ? Where you bought it at?
I put a 3 cell 11.1V and it died instantly.
Where did you get the metal body panels, they look sick?
Thx,. I made them out of aluminium.
GameHuntingNZ how did you make the bends so perfectly? Do you have a sheet metal shop?
@@pacorey73 yea we do a bit of metal work in our shop.
One off the best vid I seen so far on a what look like a simple mod but its hiding a lot more.
I have order 2 wltoys 12428 for my son and I. There is a lot off extra upgradable parts, easy to find.
We are defenetely inspired.
Like & sub
Like and sub
Where can I get metal gears for my wl toys 12428
What GoPro are you using ?
Hi, Hero 5 on superview..
what is the maximun speed?????????
And where to buy this monitor at the end of the video? Tell me please
They were FPV 5.8GHZ screen JJ RC I buy from Aliexpress you can find a much better FPV screen on Aliexpress now these ones are old..
What's max speed?
Hello. How to get body shell metal ? Very nice ⚡️
Thanks, I made them at work :)
Were you trying 3s on the stock esc?
Yea I run 3s often on the stock esc
What steering service do u use
Hi, the stock one.
GameHuntingNZ oh ok do you know any upgrade servo because my steering and esc broke and I am struggling to find a servo that is reliable
What is the top speed, sir? I will buy this
Will the engine 21t goolrc be faster than standard?
Not sure on that sorry but the higher t number the slower it will be..
how are you running 3s with the stock ESC?
yes 3s on stock ESC it is risky but I have got away with it for along time now.. I have recently just added a small pc fan blowing on ESC/motor
Have you tested the speed? is it better then brushless?
I dont have a GPS speed tester so cant sorry, I dont think it would be better than Brush less definitely cheaper thought!!
Mine would smoke that easily
Stock ESC?
@@Imazdadrags no
Plz will u tell me from which country are you coz I want to buy this spare parts which I have to repair plz plz reply
I Live in New Zealand, I made the metal body parts.
You replaced the motor with the same one that was originally. Same specs. You changed the 540 motor to a 540 motor. For what?
540 is just the physical size of the motor the one I replaced it with has less windings making it a faster motor.
@@Imazdadrags It was possible to put another gear with a large number of teeth instead of a new motor. The effect will be the same.
@@pes_Arnold new motor is better quality than the cheap crappy stock one..