I love the vector, you gotta get the perun mosfet for it. Makes the inside match the outside and works beautifully with high rof. Also for my vector I used the Prometheus hop up for krytac guns, it requires a little shaving at the bottom to make the mags go up far enough but once you do they lock in perfectly with no wobble. Also the Prometheus hop up offers better hop adjustment and more durability than the stock vector one
Hello from the UK. I need your guidance on a Krytac Vector that is misfiring - semi will fire 1-2 rounds, burst will first 1,2 or I think 3 rounds and full auto seems ok but does seem to pause now and then. I have just replaced the traingular selector board but no improvement. Could you give me a short list of things to attck next from a problem solving point of view. Thanks in advance for your help. Ken
I put electrical tape on my mags, as it reduces the wear (divides by the amount of mags) and it marks my mags as mine since i use blue electrical tape, making my mags easier to find in the dark/settles disputes over mag stealing
Do you have any suggestions on how to fix or replace the spring from the kv mags? I got 3 out of 7 mags that are duds and they're all fairly new(tried it out on 1 cqb game).
Did you find a solution to this? New KV owner and I was able to get 4 mags, 2 of them were jamming like crazy. I was only able to fix one back to reliability
@@PuddyIzzy That's a shame. Might I ask what you've done with those faulty mags? I suppose I can live with having 1 of the mags being faulty near the end, but considering how it's a brand new mag going for $28, it's disappointing.
The airsoft CZcams world is really going to make me have to start my own CZcams channel. We got people telling folks to put black tape in their $500 airsoft gun. SMH Airsoft CZcams is pure cancer. Titan Power has also paid them all to promote their scam ion batteries. No money in Airsoft CZcams so when a company offers money they take it. Even though it is a terrible product that should not be used, they sell out and promote it. Teflon tape, JB weld, R-Hop patches, Titan power, black tape, super glue, washers, list of things that should never be used in airsoft. CZcamsrs tell people to use it anyway. List could go on and on. It is as bad as the Flat Earth people almost.
@@321rydell Use lipo batteries. Don't care about brand. Titan uses the best 18650s on the market, still not enough to properly power an airsoft gun in semi auto. 1500mah is the smallest lipo I would use. C rating on lipos can be way off so it is best to compensate with higher mah.
I love the vector, you gotta get the perun mosfet for it. Makes the inside match the outside and works beautifully with high rof.
Also for my vector I used the Prometheus hop up for krytac guns, it requires a little shaving at the bottom to make the mags go up far enough but once you do they lock in perfectly with no wobble. Also the Prometheus hop up offers better hop adjustment and more durability than the stock vector one
The vector is a one of a kind. If only they came DSG'd stock ;)
Saludos from Cozumel mexico 5ta región Airsfot team
Would a velcro strip (Non-Hook side) work just as well? I used that on my M4s before and worked great.
Good tip!
Hello from the UK. I need your guidance on a Krytac Vector that is misfiring - semi will fire 1-2 rounds, burst will first 1,2 or I think 3 rounds and full auto seems ok but does seem to pause now and then. I have just replaced the traingular selector board but no improvement. Could you give me a short list of things to attck next from a problem solving point of view. Thanks in advance for your help. Ken
Maybe that's what mine needs?? I'm having feeding issues...like misfired or not fire at all...like magazine not feeding correctly
Take a look at the new perun mosfet for the vector, you won’t be disappointed
I put electrical tape on my mags, as it reduces the wear (divides by the amount of mags) and it marks my mags as mine since i use blue electrical tape, making my mags easier to find in the dark/settles disputes over mag stealing
BRO! New social media challenge: drop your mag and land it.
Sick moves. Only the best can do that hahaha
Do you have any suggestions on how to fix or replace the spring from the kv mags? I got 3 out of 7 mags that are duds and they're all fairly new(tried it out on 1 cqb game).
Did you find a solution to this? New KV owner and I was able to get 4 mags, 2 of them were jamming like crazy. I was only able to fix one back to reliability
@@salmon4o4 sadly, still no work arounds..
@@PuddyIzzy That's a shame. Might I ask what you've done with those faulty mags? I suppose I can live with having 1 of the mags being faulty near the end, but considering how it's a brand new mag going for $28, it's disappointing.
Think I saw a vid where they said the krytac mags springs are weak and need replacing with m4 springs which are thicker and stiffer
electrical tape help in everything
The airsoft CZcams world is really going to make me have to start my own CZcams channel. We got people telling folks to put black tape in their $500 airsoft gun. SMH Airsoft CZcams is pure cancer. Titan Power has also paid them all to promote their scam ion batteries. No money in Airsoft CZcams so when a company offers money they take it. Even though it is a terrible product that should not be used, they sell out and promote it. Teflon tape, JB weld, R-Hop patches, Titan power, black tape, super glue, washers, list of things that should never be used in airsoft. CZcamsrs tell people to use it anyway. List could go on and on. It is as bad as the Flat Earth people almost.
So what brand of batteries you use🤔
@@321rydell Use lipo batteries. Don't care about brand. Titan uses the best 18650s on the market, still not enough to properly power an airsoft gun in semi auto. 1500mah is the smallest lipo I would use. C rating on lipos can be way off so it is best to compensate with higher mah.