Spray foam kit~How I Did It~
Vložit
- čas přidán 14. 07. 2024
- ~How I Did It~Using a spray foam kit from the big box store on the inside of the 6' x 5' "Ezee shed" that will house my Off Grid Barn water purification system, and backup generator. Basically this is just like using a paint sprayer, the foam will feel very warm while spraying, and during the expansion and curing period. TAKE YOUR TIME, the kit comes with plenty of replacement tips.
Have fun watching, be safe on your projects, and thanks again for watching ~How I Did It~ have a Blessed day.
Disclaimer: All videos produced by ~How I Did It~ are provided for entertainment purposes only. Some projects, materials, and techniques may not be appropriate for all ages or skill levels. The techniques used in these videos are a simple breakdown of ~How I Did It~ . Please use, and follow all safety precautions while doing your projects. ~How I Did It~ does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information viewed on this site. Viewers must be aware by doing projects on and around their homes, and property they are doing it at their own risk, and ~How I Did It~ cannot be held liable if you cause any damage to your property. It is the sole responsibility of the viewer to educate yourself on your local requirements, codes, safety precautions needed before undertaking any sort of projects.
royality free music from https www.bensound.com - Zábava
A woman who is not afraid of work and with common sense. Job well done 👏
Hey there. I work in spray foam insulation. You should have a full face respirator or a fresh air system. The dust mask doesn’t do anything to the isocyanate in the 2 part chemical. If your going to use a froth-pak use a respirator. Also if you are going to use a spray foam insulation I recommend issuing latex paint or a thermal barrier paint over top of the foam as any type of UV light will cause the foam to degrade rapidly
Good suggestions. See Spray Jones youtube channel for great info on foaming
Thanks! Great tips.
does this spray actually help with the heat..
@@ketolifestyle68 it’s not as affective as getting a company to come and do a proper job and then end cost would be fairly similar
@@kelanmacfarlane2339 so what if you just had a small job like the one in this video who would i call
WOW nice ! Thanks for sharing !
Love your beautiful dog !
Right on, solid and groovy!!!!
Awesome, I'm on it now since i see it. Thanks.
I'm thinking on doing this.I'm in the process of putting together a shed.I subscribed hoping you will have lots of content I can use.Nice soothing voice and direct to the point.Thanks
Thanks for sharing this
exactly what i need to do thank you
Thanks for this vid. Very useful
You are very welcome! Thanks for watching.
excellent video !
Thank you very much! I appreciate you watching.
just want to say that you make really good videos. thank you for making them.
Good morning, and thank you Bruce, you made my day!
Such a great video!!!
Thank you!!
I really need to do this for my shop it gets unbearably hot during summer.
Now you have me thinking of making an insulated Man Shed. Just kidding.
BTW... I love dogs too. Once when I was knocking down a 2,000 lb. plaster ceiling in a dining room, my dog kept parking himself by the doorway to the project room, which I had sealed off with thick plastic, tape, and tarps. I was worried he'd inhale dust from the work, which took two months of my life, because I had absolutely no help from start to finish, which included 300 ft of embedded copper line for the radiant heat, and a "popcorn" finish ceiling.
I would block that vent and test to see if you get any moisture issues, I bet you won’t and will will really keep the heat in. 👍
👍
I guess it is perfect for sound proof studio.
Maybe, if it was thick enough.
I was wondering what you were foaming. Looks like a small backyard shed. The froth pack is great gor small jobs and if you don't want to hire someone else. The weak spots are the floor of course and the corners. If you still have foam left. I suggest you retouch that top corner. Then again the door isn't air sealed either so that's another weak point. Thanks for sharing though.
@@howididit no problem happy to help. I'm an insulator by trade, mostly do attic work and like helping people out and sharing knowledge.
I wonder if I can use this foam kit to seal my metal roof seams. I think I should be able to.... right?
super ideas! I'm essentially doing the same to a small Arrow shed that will house my battery bank for off grid solar system. My question is how does your shed handle condensation with the foam? do you keep a small vent open year round? thanks, I appreciate your thoughts now that you've lived with your Purification Barn... Also did you use the Froth Kit Low GWP 200 Sealant Foam Kit 427-oz ?
Small gable vents open year round. I have zero issues with condensation, and I live in humid Florida. 600 ft. Board Polyurethane 2-Component Spray Foam Kit from the big box store.
Класс👍
Спасибо
Wher did u buy this DIY kit 2 spray on urself
What was the size of your shed?
Have you taking temps in the coldest days of winter, what were they outside/ inside?
@@howididit Thanx it does actually. I live in MI it gets very cold as you may know. Would like to get temps close to 70 w/o heater in similar setup.
How much of this kit did you use? And what size shed? I'm looking at doing the same but not sure what kit to use
The entire 600 ft. Board Polyurethane 2-Component Spray Foam Kit from the big box store.
Whole shed with one 200 kit?
Hi, I'm from the UK and I've been investigating this very idea as I need a dry shed for my tools. I can purchase kits from the USA via ebay but I'd like to know how much this would cost in the USA for a resident. It's very difficult to obtain any information on this over here due to the protected and controlled market. I just want to insulate a shed not a house.
Hello, Im not sure why this is just showing up in my comment box...anyway over $800 us, the prices have skyrocketed these past 6 months.
What kit was it
the kit was from HD www.homedepot.com/p/Touch-n-Foam-600-ft-Board-Polyurethane-2-Component-Spray-Foam-Kit-4006062600/204962775
And here is a perfect example of why you hire a professional
haha, thanks for watching, Stay warm ;-)
How expensive is it ??
When I purchased it, I believe it was in the 600 price range, today it is over 800.
@@howididit Ouch !!!
@@gerry5134 that's the truth, and it only expected to go up.
How much was the kit?
They are currently $388 at Lowes
I am sure it work but looks horrific
Wondering what "pretty expensive" was I checked this product at the Home Depot. Wow. $345 (plus tax) is definitely expensive. Maybe a professional foam company could have saved you some money? Or not.
People don't waste your money on those foam packs is better to hire a professional installer those packs are only for small repairs I have 12 years spraying and I been doing repairs from people that started projects like this they just wasted there's money and time . On this video she makes Big mistake covering the floor to close to the Walls is very important left 4" Gap to seal the wall from leaks
Just a heads up Mario, this project is completed, it is working perfectly for what I needed it to do, If the project were bigger, and I had a money tree, I probably would have hired a professional. Thanks for watching. If you are local to central FL feel free to leave your business info and web page.
Isocyanates are really nasty and build sensitivities. Hope others that watch this video seriously heed the instructions and use proper PPE, not what the creator here used.
Right! Thanks for watching.
Waaaoooo you deale with the worst of the worst garbage arrow ezee shed, i will said to any body never ever buy the horrible arrow ezze shed.