Honda Civic -- How to Replace the Passenger Side Low Beam Bulb 2006 2007 2008 2009 2010 2011
Vložit
- čas přidán 27. 08. 2024
- Step by step how to replace the low beam night time bulb on a 2006 2007 2008 2009 2010 2011 Honda Civic.
Replacement Fender Clips -- amzn.to/3V2M2NY
Replacement Factory OEM Style Bulb -- amzn.to/3AiHR8w
LED Bulb -- amzn.to/3EwNVNf
Turn the steering wheel all the way to the left to get more working space under the fender
Why?
@@gmoneys818 read it again
You guys rock.
@@gmoneys818because having more room to work makes it easier. I can't believe I needed to explain this...
@@motodad1753frr
This is so detailed, thoughtful, and easy to follow. Thank you!
Great tip to put in the bulb first that's not connected to the cable. Using that tip I was actually able to install the bulb and then connect the cable and I didn't even have to remove the Fender molding. It was a little tricky. I had to remove the top part of the windshield wiper fluid tube and the molding on the to the left of the engine on the car frame.
I think this was the best way.. good tip man 🙏
great tip thanks!
Just got done doing mine. It is certainly a little tight in there, but definitely doable. Thanks for the video! Also, that turning the wheel tip was helpful. And thanks for showing how to remove the clips, I didn't even break one.
Thank you. Got mine replaced in about 20 minutes because this video. The passenger side light is the tricky one!
Practicable easy and quickly sir, thank you so much 🙏
This is an excellent video, explained clearly, and simply, and well photographed.
Thank you for this video.
Glad it was helpful!🤙
You posted this video at the perfect time. Thank you.
Thanks for showing this. I had to use a vice grip to pull the bulb from the socket because it wasn't budging at all especially with the limited space.
Thank you very much, I did it by myself following your instructions. Blessings
Like the way you detailed it and use of camera angle to show it. Thanks!
For those unfortunate enough to buy the bulb before taking the car apart, take your car apart first and make absolutely sure you know which bulb to get. I got a 9006 halogen thinking it'd be good enough but it had the wrong depth so it'd go all the way on, but wouldn't twist in. So now I need a Sylvania HB4 U 9006.
next time mine goes out I'm putting in LEDs so I never have to do it again, such a pain.
nice Konata picture
👍
Aren’t low beams H11?
Very detail...glad someone is able to show how to clips works.
This helped me replace the bulb myself. Thanks.
THANK YOU! Best video i've seen!
Awesome video, it was my first time doing it on my own and this was super helpful!
Thanks a lot . This was very informative.
Very good video. Thorough and no bullshit!
Instructions unclear....
buying a new car.
😆
No entiendo lo que dice porque no hablo inglés pero con el video viéndolo si pude cambiar la bombilla a mi carro gracias 🙂 🙃
Thank you sir!
Would you have to disconnect the battery or is it fine with it connected?
That’s the driver side
He’s doing the passenger side
Thank you sir.
Thanks bro I appreciate it 👌🏽
No problem🤙🏽
yep the best video
Thanks for the kind words! I hope it helped you.
MY KING, #1
Well done.
Thanks for the info
You bet
Great job
Thank you so much!
Thank you
Thanks...
Great video man
Appreciate it!🤙🏼
Is the approach the same for the driver side or do you recommend removing the battery?
Do you recommend to replace it with led or just keep the original light?
Guys 22 here dont know ish about cars, mine went out and honestly, just take the bumper off, its actually easy, literally a few screw and u can get to all of it! Just need a jack,screwdriver, and 1 extension piece for when u almost take it off, and boom its all plastic! Insane
Because fyi i did try to go under the wheel but i have a LX model and ya they made it to where u have to take off the bumper its the only way, i had no space under my wheel to get to it stuff was in the way
much gratitude
Thank you!
Merci ✌️😀
Thanks bro
Should I disconnect the battery before replacing the light bulbs?
You should be fine, I personally would just try not to touch it but that’s just a personal problem lol
Thanks
You advertise the LED aftermarket lights, do you offer video of you installing the (Marsauto 9006 LED Bulbs 6000K, 600% Brightness, HB4 HB4U 9006XS LED Light Bulb, 12 CSP Chips Cool Bright, Pack of 2) lights?
When I had to do this it was the middle of January and -20c and blowing. There was no way in hell I was getting it done the way described in this video. I had to jack the car up and pull the tire off. Once I managed to get the liner pulled back I still couldn't get my arm up in there worth a shit. Once I was able to finally get my hand to the bulb I couldn't see a damn thing and had to do it all by touch only.... A job that should take no more than 5 minutes wound up taking over a goddamn hour. Don't even get me started on trying to clean the inside of the back window.... Whoever designed this car needs a kick in the nuts.
My only issue is that at the part around 6:18, nothing I do is working to align the bulb at the 3 holes, I push to turn & nothing happens, I try to push it in so that I can turn it & nothing, driving me to insanity since I've been at it for at least half an hour and nothing
Good video, but your car need a Wash!
why not just remove the tire?! make things a lot easier.
Easier but more time consuming.
Thank you
Thank you