Caleb walks us through the set up and install of the Updated Rokblokz Bronco Mud Flap Kit.
Vložit
- čas přidán 25. 08. 2024
- Caleb shows us how to install the RokBlokz Mud Flaps on a 2021+ Ford Bronco. This will be the same process for the Sasquatch kit.
Installing clips to front Bracket - 1:50
Front Flap Assembly - 2:25
Front Install - 5:51
Rear Flap Assembly - 10:52
Rear Install - 13:51
If you are interested in picking up a set for yourself Check them out here:
rokblokz.com/p...
For all your other wheel spray protection needs check out our website at:
WWW.ROKBLOKZ.COM
❱ Rokblokz GEAR: rokblokz.com/c...
Follow us!
✔Instagram: / rokblokz
✔Facebook: / rokblokz
✔TikTok: / rokblokz
#rokblokz #Ford #Bronco #bronco6 #MudFlaps
Check out Artlist.io and epidemic sound for all your music needs!
Just got mine on yesterday. Front and Rear XL flaps for Sasquatch. They are well made, and look good, but man, the assembly and install was a huge PITA. This video was definitely helpful. A couple of pointers: The thumb screws come in 2 different lengths and you need the longer ones for the rear (I mixed mine up the first time). Also, don't tighten the rear brackets all the way until you make sure you can get the mud flap on. You may have to adjust it, and you can avoid having to loosen the bolts and re-tighten them again like I did. I'm glad I have these mud flaps. For the price, I think they should come more pre-assembled.
Just put mine on. Was fairly easy aside from my body mount on the back passenger side being off center. Loosened it and popped the mount on. One tip on the front, turn your wheels to help whichever side your working on, at lesst it helped me.
Just installed these. Fit great with no install issues. If you are wanting to keep the road spray off the sides of your door and the actual door handles this is it. Drove home from picking up a new Bronco and there were all ready rock pits on the lower door quarters from the 120 mile drive home. Yeah, they are expensive but so was the new vehicle. Big selling point is they come off easily for trail trips.
Did anyone else get smarties (candy) in their shipment?
I did 😄
Mine came with a free condom.
@@tomrowin504 yep!!!
Yep
Yep!
Just finished installing mine, I ordered the XL for my Big Bend w/o Sasquatch with 33's . I decided to rotate my tires as well, not necessary but I gave me a bit more room to get at the intrusion bar. The wheel well liner needed to be manipulated a bit but a straight forward install. It comes together nicely. excellent materials solid protection with the option to remove when 4x4ing. two pats and a thumbs up!
I will say to make install on the front easier, remove your fenders and turn the wheel to the far right when installing the front drivers side flap, and the far left when installing the front passenger side flap. That should give you some more room.
Appreciate the tip, helped a lot
Got mine on today so far so good
So nice I installed them twice! (Because I left them on while rock crawling and destroyed them)
Only issue I ran into was 1 flange nut on 2 of the flaps rounded out the inner plastic of the flap…so I could not fully tighten down those 2 screws
Just put on the fronts. Sas pack so I got the XL. Ez enough install , wish the hardware was black to match the flaps. Seem like they should do a good job rock deflecting and they are not cheap plastic like I got from another company.
Talkin bout mudflaps my bronc’s got em
Something that should have been addressed in this video is the rear bumper spats on Sasquatch. The mud flaps look like a terrible parts store afterthought with the spats under them. Remove the spats and the look is almost factory looking. RB could do a little better job making the mud flap fit better to the bumper once the spat is removed but I still like the spat removed look much better.
Do yourself a favor and pre-install the flap to the bracket on the front and rear, you will save a ton of time. With the rear, don't tighten the wo hex bolts all the way so you can make lateral adjustments then tighten in desired position. Installed the fronts in the dealer lot for the 800 mile trip home in a few minutes. Not a single chip! Did the rears once home. I did a permanent install on both front and rear. I've got a pair on my F-150 Raptor as well- convince me to do the same on the new Bronco.
So glad they could help protect your new beast!
mine did not fit with 37 12.50 have a 2.5 inch lift but fronts did not clear didnt even dare leave the front mount on tire hit it when turning
I am going to put myself out there. I tried to install the fronts and they rub at full lock right and left! What am I missing! I have a Badlandads with a 3” IKON lift with BFG KO2 35s.
What can I do if I can’t unbolt the front crash bar screws? Has anyone experienced a refund for this? I have a 2024 BL 2Dr.
Will these work on a Base with stock tires and Ford OEM sidesteps (not rock rails, not tube steps)?
Does your white color match the white of the bronco?
Who makes the rear bumper. the one in the photo
I am sorry but that wasnt our Bronco so I dont have a build list.
I need two clips. I put them on backwards and broke them in attempt to remove them. Can I order two replacement clipsAlso the 2023 Badlands with SAS must have some slight modifications because the splash guard and whatever is behind it is protruding out and obstructs placing the bracket on the crash bar mount.
I am sorry for not seeing this sooner, but if you still need parts please email us at support@rokblokz.com
Yo, repping XenoGears!
Noticed that too! The man has good taste!
What's going on here? I bought these flaps but have not installed them yet. Is there a modification I need now?
No modding needed. I just installed mine. Super easy. No drilling or anything.
35-40 Foot pounds seems kinda light, it's not even one 1 PSI
Why would you spend over $500 for a set of Mud Flaps? Insane