Hi, cool flying....I like your colour Scheme, it looks like you are fling very slow. I have a Bantam and would love a Quicksilver, can you land any slower than 20mph ?
Respected sir Am very much inspired by you and with your aircraft will you please figure me out to make my own ultralight aircraft.. just like this aircraft. I like this simple model very much i love the way it is. Thank you and i hope i will get some positive reply
@@Dsoginventor I bought an MX in 1982, one 20 minute flight talking to an instructor on the ground, the MX I had was a single seater. Flying it was very simple. There were many people flying MXs At Lake Elsinore then, most had the minimum instruction. There was one incident when one sales guy didn't use a two way radio for the first flight, the young woman had been given instructions on the ground then just took off. She immediately became disorientated once in the air and wasn't sure where or how to land so just kept flying round till she ran out of fuel, the MX did a series of stalls and recoveries till she sort of landed on the wheels, bending a number or tubes in the process. The girl wasn't at all phased by the incident, got the bent tubes replaced and our sales guy talked her via a two way radio through her first flight. She was a tough young lady to have gone just about straight up after that incident, it must have been frightening. There was some other dangers around as there was a runway for light aircraft and bigger planes taking up sky divers. She had actually 'landed' close the main runway area.
I flew an MX in 1982, it was a simpler version than the one shown. No steerable nose wheel. The foot pedals operated 'flaperons', there were no ailerons, the joystick operated the elevators when push/pulled and the left/right operated the rudder. There was a brake pedal that pushed a metal flap directly on the tire. The 1982 model had an extremely short take off roll, 17 yards in still air!! Great to hear the engine, not sure if it was the 1982 version. The 1982 version had a Cuyuna 440 cc Snowmobile engine. It was so easy to fly. I had no flying experience but my first flight had to be a solo flight, no two seat planes available. My flights were at Lake Elsinore around May-June 1982. To speed up pre flight checks, I painted all nuts and bolts with a thick strip of nail varnish onto the tubes, it would then be obvious if something had moved or come loose. Great memories.
Good video! Well done.
Nice. Congrats. And thanks
wonderful
Bellissimo e molto economico, con il semplice profilo Gedeelskj. Nel controllo prevolo, non ho visto o notato il controllo degli alettoni
I'm saddened by the loss of your Dog Yukon.
Exelente buen vuelo
So nice! I want one
You are talented and hero
Even though the sound is wrong and out of sync at some points in this video, I watch it for the sound... while flying over the fields
NICE !
Looook out !!! At the 1:08 mark there's a rabid wolf sneaking up on you.
Good to see that you were doing a great pre flight.
“Pre flight” must be pilot lingo. 😂
Very nice 👍🙂👍🙂👍👍🙂🙂🙂🙂🙂👍👍👍👍👍🙂🙂👍🙂👍
whats the speed untill take off?
Watching the takeoff, That thing just wants to fly.
If the ultralight didn’t kill me, I’m sure my wife would for bringing it home.
Hi, cool flying....I like your colour Scheme, it looks like you are fling very slow. I have a Bantam and would love a Quicksilver, can you land any slower than 20mph ?
GOOD
very like plain
Good
Why no seat belt?
I have a question how accurate is air gauge do you know Ashley did you test it there's somebody else I'm curious??
You must scouting fer woodchucks. ha ha.
Skål 🍺 🍺 🍺
Is this Prescott valley?
is that a standard brake lever kit, are the cables custom length, and is that standard control stick length.
چ
@@fakhardinesaid655 HE DIDNT CHECK THE PROP NUT'S
Che potenza muove questo velivolo ?
Wing size please?
The reversed pedals would throw me off
Mil felicidades a las mujeres por la equidad de genero, aunque da verguenza ver que hasta el 2019 se hable del tema.
how much $usd. pla..
engine how many cc ? 120cc or 200cc
fardin pasalar 447 Rotax most likely
Canh dai rong bao nhjeu bac
Respected sir
Am very much inspired by you and with your aircraft will you please figure me out to make my own ultralight aircraft.. just like this aircraft.
I like this simple model very much i love the way it is.
Thank you and i hope i will get some positive reply
Ashish Dhibar I don’t think plans are available for a Quicksilver. There might be kits. I think you have to buy them fully assembled.
.............................. 🔦🎓👍🌷
Why can't we get a ball park price.
If the engine infltshutdown,can it still gliding
agus zaenal arifin absolutely
Yes but with a very poor glide ration of about 10%
@@johnwoody9505 lighter the aircraft is the faster it slows down, most of the time
@@daftnord4957 I'd reckon the biggest factor would be drag, not weight.
Bagaemana cara membuat setir oke
You just buy one and get in and take off.like riding a bike
bks bks , Yes, and quickly die. Yes, no experience, no license, no training whatsoever. Just throttle up and take off. BTW, make out a will first.
@@Dsoginventor I bought an MX in 1982, one 20 minute flight talking to an instructor on the ground, the MX I had was a single seater. Flying it was very simple. There were many people flying MXs At Lake Elsinore then, most had the minimum instruction. There was one incident when one sales guy didn't use a two way radio for the first flight, the young woman had been given instructions on the ground then just took off. She immediately became disorientated once in the air and wasn't sure where or how to land so just kept flying round till she ran out of fuel, the MX did a series of stalls and recoveries till she sort of landed on the wheels, bending a number or tubes in the process. The girl wasn't at all phased by the incident, got the bent tubes replaced and our sales guy talked her via a two way radio through her first flight. She was a tough young lady to have gone just about straight up after that incident, it must have been frightening. There was some other dangers around as there was a runway for light aircraft and bigger planes taking up sky divers. She had actually 'landed' close the main runway area.
How much to buy wouldn’t mind knowing
@Jr ALEXANDER can you ship it to Thailand?
@Jr ALEXANDER let me find out how I can receive them here etc.
They wouldn’t have died. They would not have lifted off the ground.
Low level of sound
A very striped down version, a poor man's version.
At least poor (relatively) people can FLY. At least if they are fearless and can find some wingnuts!
I flew an MX in 1982, it was a simpler version than the one shown. No steerable nose wheel. The foot pedals operated 'flaperons', there were no ailerons, the joystick operated the elevators when push/pulled and the left/right operated the rudder. There was a brake pedal that pushed a metal flap directly on the tire. The 1982 model had an extremely short take off roll, 17 yards in still air!! Great to hear the engine, not sure if it was the 1982 version. The 1982 version had a Cuyuna 440 cc Snowmobile engine. It was so easy to fly. I had no flying experience but my first flight had to be a solo flight, no two seat planes available. My flights were at Lake Elsinore around May-June 1982. To speed up pre flight checks, I painted all nuts and bolts with a thick strip of nail varnish onto the tubes, it would then be obvious if something had moved or come loose. Great memories.
'stripped'....different word, different meaning….totally
@Jr ALEXANDER I am about to buy one as well and was wondering how they were steered on land
@Jr ALEXANDER have you been flying in yours yet?
title should be ''the prairies''. hardly saw your machine. need more machine
Maybe they would have died. Bolt has to fall out first. LOL
Hello. Looks very interesting but the plane looks very fragile to me. Better never fly it.
Как на русском ???
Good