Making RC Lawn Mower
Vložit
- čas přidán 15. 07. 2022
- I used a 173cc gas engine, this engine has a battery charging function, the charging is too weak to cope with the current consumption, but it significantly extends the working time. The mower is powered by two 200w 350rpm motors, the electric motors are powered by two rc brushed motor speed controller. I used an electric lift with a maximum lifting capacity of 200 kg to adjust the height, I powered the rc brush motor speed regulator, it is less powerful than the ones I powered the motors with. The gas engine is turned off by a two-channel rc relay that I connected to the coil, After the remote control is turned off or the range is lost, the relay closes the contacts, which causes the engine to stop working. I adjusted all dimensions to the size of the mower housing and wheels mini quad. Working with a remote-controlled gas mower is a pleasure and great fun, the range of the remote control is large, so your legs will thank you for such work :)
Control parts I used:
Controller RC Electric engine -amzn.to/4aME1oi
Controller RC electric lift - amzn.to/44ebZ2x
Remote Transmitter - amzn.to/3Wb9EU4
Gear Reduction Brushed Electric Motor - amzn.to/4bafXLR
Electric Linear Actuator DC 12V - amzn.to/3xI0Fj6
no dialog; letting the work speak for itself. no super loud and annoying music. this is a fantastic video and build.
This is by far the best build I've seen in quite a while. Awesome job!
That paintjob completely transformed this whole build. Well done.
This is by far your best idea! Absolutely Legendary. The first person setup is unbelievable. So impressive! Sitting in a chair in the shade while mowing is the actualization of dreams.
I watched the whole video and really enjoyed it... I agree watching him sit around while it chewed up the ground was fantastic!
Thank you 😁
The insane part to me, was the fabrication was the hard part... the actual RC control was easy...
@@WorkshopFromScratch Hello, we are a company from Shenzhen, China. We can produce high-quality parts for you while significantly reducing costs. I think this product of yours can be mass produced, if you need production and processing, please contact me, thank you
@@WorkshopFromScratch , so, I take it that you live in the UK? I know of some places where this would be a good idea to manufacture. Also, you could get some agreements with the government and have places, like, say, national parks, national military parks, golf courses, and, most importantly, disabled people that are on low incomes, have this sort of thing to help them out with their lawn care needs. Now all that we need is a combination weed eater and lawn edger, with adjustable capabilities, a hedge trimmer, and a snow/dust/leaf blower, with all of them being remote controlled, and a person could have their own lawn care business. I am serious, you should make a legitimate business with your various devices, as it could be as much of a game changer, if not even more so, than the devices that companies like Worx and DR develop in my country.
The cleanest build I've seen in a long time. Gonna steal some ideas from your build your skills and tips are gold.
What a quality build. Nicely done. Very top shelf! The front wheels may be a bit more stable further out to the side but man that’s so minor. Super, super sweet! Next you need to “project that lawn”! Thanks for sharing that deserved a sub!
Super się ogladało - moje gratulace 😀
Genuinely very very impressed with this! I only have a small garden but definitely something I may work on for myself! Awesome work!
Умные и рукастые мужики респект...
This is some of the best machining I've seen on CZcams great job!
one of the bet remotes i have seen
What a legend!! For the next project make it Gps guided.
Great video, really like how you did the deck height control linkage. I really want to build a tracked version as I have some steep banks to cope with and this would fit the bill nicely.
Just get a tracked mower and snowblower and make a monster mower!
me too
@@georgef1176 That's not a bad idea although a tracked snow blower is pretty expensive and I'm on a limited budget.
Checkout my channel for a tracked mower build
I am building something similar to what you are describing here. Are you having an issue fabricating the tracks and rollers? Have you considered using the tread of a dirt bike tire as the track?
I wanted to build one in 1981, I was just thinking RC steering wheels assembly to a self propelled lawn mower, but you have taken this to a new level with separate rear wheel power it works great as a zero turn.
Workshop From Scratch.. Now that is my kind of lawn mower.
this makes to 100% more fun then a Lawn mower robot
This type of mower would be perfect for those with physical disabilities, who cannot afford to pay for the mowing services from others. Thank you so much for this video. Would it be possible to add programming software and/or GPS functionality for the mower?
Great idea. Therein lies a dilemma. Pre-covid this machine is easily deep into four figures of price. Perhaps a machine could be subsidized within a program vehicle and be made affordable in this way
We have had robot lawnmowers for many years, they do all the cutting themself, 24/7.
I’ve missed mowing my lawns. This is really cool.
Hey .owing robots are pretty cheap and do a great job. They are low powered and small, but now every day in a random pattern and always keep the grass low.
Seems like an awful lot of fabrication and expensive equipment for someone with a disability on a fixed income .
Jesteś Mistrzem, ja o czymś marzę, a Ty to budujesz! Brawo👏👏
Dziękuje 😁
@@WorkshopFromScratch maybe stayed more fast stay a buying a ride on mower classic
I love any build video in 60fps+ So smooth! Nice work!
rig up an alternator and be all set to go. Love the idea.👍👍👏👏
Piękna robota, jestem pod wrażeniem. Czy z NASA składali Ci już propozycje, żebyś im robił "łaziki"?
Dziękuje 😁 Hehe kosiarkę mogę im dać na Marsa😂
@@WorkshopFromScratch Jaki koszt takiej kosiarki licząc same materiały.
@@marekugowski4784 Jak już masz kosiarkę to minimum 1000zł trzeba zainwestować, silnik który użyłem ma ładowanie mało wydajne ale znacznie wydłuża pracę jeśli masz silnik bez ładowania to trzeba by było też o alternatorze pomyśleć
@@WorkshopFromScratch pytanie czy alternator nie zadusi silnika gdy wjedzie kosiarka troszkr w większą trawe.
Zastanawian sie czy prądnica nie była by lepszym wyborem..
Masz dar do tworzenia takich rzeczy,
Ja zrobiłem sterowanie do przyczepy kempingowej do silników Mover, właśnie jak ty oparte na sterowaniu wypełnieniem (PWM).
Jakie gotowe płytki wykorzystałes do sterowania silnikami dc.?
@@WorkshopFromScratch , so, about $217 USD, gotcha.
I'd love one of those. Definitely on the "Must Make" list for me 👍👍👍👍
Jesteś niesamowity!!!!!!!!!!!!!!!!!! Super projekt!!!!!! Rewelacyjnie by było jak byś wrzucał do opisu filmu linki do tych kupowanych podzespołów.
Needs a winter snow-blower attachment! Good work.
Great idea 😀 Thank you 😁
You could make it a *Robotic Lawn Mower* !
There is an Open Source Project, “Open Mower” that has done the controls, and you have made an amazing machine, now you just need to combine them!
Yeah Husqvarna sells those. Nothing new
@@alexstromberg7696 New in that you could make it yourself with commonly available materials, and maintain it yourself.
Granted if i was in the EU I would probably just buy one of those models too!
Maybe one of the best videos you have made!
Seeing you using the shop equipment that you already built is really satisfying!
Thank you 😁
@@WorkshopFromScratch I second that, super cool build. My only suggestion is hanging the cutting deck with chains and installing a string of rollers on the leading edge so that when it hits an immovable object like a rock, log, or uneven ground it bumps the deck up without transferring all the force to the plastic actuator.
I want one!!! That was an awesome build and very well executed.
It doesn't cut any lawn, I think the blade needs to be stronger, but the remote control cart was a super project! Very cool.
Now all it needs is GPS and it will go from *great to amazing!* You never cease to amaze me. Well done and *God bless.*
There is an Open Source Project Doing This, “Open Mower”
That has got to be the best form for mowing I've seen yet. Even better than these robotic things by miles. Awesome job mate 👍🏻👍🏻
Mowing such a lawn mower is a great of fun 😁 Thank you 😁
@@WorkshopFromScratch Hello, we are a company from Shenzhen, China. We can produce high-quality parts for you while significantly reducing costs. I think this product of yours can be mass produced, if you need production and processing, please contact me, thank you
Вы ГЕНИЙ.!!!
Great job. Next step -add electronic from smart vacuum cleaner with lidar head....
excellent invention of a remote control mower it looks spectacular, with time they will be like this, greetings from Mexico 👍
Someone in Mexico should hook up with this guy and set up a manufacturing plant near the California/Mexico border to build these things with GPS. Creating great jobs in both countries. and do it before China steals the product.
Impressive. Your knowledge of electrical systems, relays, and radio channels is really impressive.
Thank you 😁
If i have mind like you. I'd be rich because so many people in my country need this.
Laziness is the engine of progress!
This is pretty damn cool. As much time and work and money that you spent you should of used a multi blade deck from a rider and done at least a 42 or 48 in cut. If you put small tracks on the rear for better grip it would serve as a great mower for slopes that are to big or dangerous for a rider too. But overall this looks like fun. As always great job. You are the best channel for these kind of builds. You started out with very little equipment to it is nice to see your shop and skillmanship grow.
I recently watched a video where the guy basically only used a 50 inch John Deere deck and engine to build one of these. It was half the length of this one and was all wheel drive. It looked like a converted push mower on steroids😂
Impressive. Any chance you could take this further by installing a boundary wire around the perimeter and automating a geo reference pattern? 😁
yet another project expertly executed, that final shot of you in your chair with your feet up, that's what it's all about. congrats fella.
Thank you 😁
Awesome build! Me thinking how to turn my Kraton RC into a lawn mower 🤔🤔🤣
If u could mass produce this you'd be rich.
Część można prosić o listę elementów potrzebnych do zrobienia takiej maszyny?
Dorobić sterownik GPS i można zaprogramować teren koszenia, a kosiarka będzie sama kosiła wyznaczony teren.
Dobre!:)
Agree one of the best mower frame productions on CZcams
Na ile koszenia starczają te akumulatory?
Ciekawe urządzenie😁
Silnik posiada ładowanie słabo wydajne ale zawsze trochę wydłuży pracę bez ładowania nie sprawdzałem. Nie mierzyłem czasu ale moja działka ma 30arów skosiłem około 60% działki bo reszta to drzewka kwiaty itp, po tym czasie dalej jeżdziłą ale już ledwo nawet można powiedzieć że trochę przesadziłem i mało co akumulatorów nie popsułem bo napięcie spadło poniżej 10v, ale podczas tego koszenia i tak musiałem robić kilku minutowe postoje bo okazało się że silniki które zamontowałem szybko się grzeją i trzeba teraz pomyśleć nad chłodzeniem, przez ich nagrzewanie też spadała ich wydajność co napewno skutkowało zwiekszeniem poboru prądu. Po dłuższej pracy będę mógł coś więcej powiedzieć bo narazie to testy :) Dziękuje, pozdrawiam :)
@@WorkshopFromScratch dziękuję, za wyczerpującą odpowiedź 😁
I dono whether u see my comment or not but, i would like to appreciate few things in ur work.
1) u make it look proffessional
2) the attention to detail is really good
3) accessories are chosen wisely
4) even the lengths of the wires r more than enough even i like to keep it like tht
Lastly
If i can i would ve ordered one for myself from u, or build one diy copying u.
Bt i am from India n dont have facilities like tht with me.
Subscribing u as ur taste meets mine..
Keep up the good work n inspire us more...
czcams.com/channels/0SiX6w_t6ZDj2lOvOfLe-g.html
... I'm only 4 minutes into the movie😂 and I just want to say wow crazy you have all the equipment to make your own wheel hubs and everything that's pretty sick❤
I love this guy! Work smarter!!
Gostei muito parabéns , assim e fácil de cortar grama kkkkk precisava de um desses , enfim ótimo trabalho como sempre , um dia desses faz um kart top diferente de todos , do seu jeito aí , valeu
Great idea and amazing build! You should put air filters on the electronics fan. Dont let it pull dusty air in and get all over the electronics! Also the engine rpm should not exceed 3600RPMS. It sounded far higher than that.
Thank you 😁 You are right with this filter, I will definitely do it. The motor I use is a Chinese motor, and I can't even find the name of the manufacturer, I once bought a mower with this motor in a supermarket and it had such a high speed rmp.
Nice build.
Dude you are a master at what you do. I wish I could afford to buy one of your RC mowers.
I like to see good fabrication techniques like gussets and bolt through construction and/or use of threaded inserts which actually have structural integrity vs so many of the CZcams "makers" who think it's OK to thread thin-wall tubing for bolts and expect their projects to actually work beyond the 30 second demo at the end of their videos..
Seriously?
Pure genius my friend and your quality of workmanship is phenomenal!!! I very much enjoy and appreciate every one of your builds!! Thank you!
Thank you 😁
Holy shit. We're here in 2022, and Workshop From Scratch is thinking 3022. Keep up the great work, these videos are bloody amazing.
Thank you 😁
Like the part the dremel makes the sound when it cut slots for the fan...
This idea enables people to love to work.
Absolutely amazing build as always.
I was thinking about the same project for a while.
Quick Question: I was brainstorming about going a step further and controlling the mower through internet connection remotely
Any ideas?
GPS-Sensors are rather cheap these days. You could attach one to a microcontroller and write a routine which navigates from one waypoint to the next.
Throwing in a compass module or an accelerometer too won't probably hurt either.
Involves some math and will probably take a few test runs and some tweaking to get it right but then you'd have an autonomous lawn mower which works completely offline.
There is an open source project for GPS guided robot mowers. As cool as the remote-control feature is, it will quickly become boring. This way, you can just tell it to mow the backyard with a phone app.
Electric robot mower meets Drone meets RC car equals to ( !!!!! PURE GENIUS !!!!! ).
Looks almost like a factory build agricultural device. Great work.
Комментарий в поддержку канала и ролика, а также труда мастера.
Great Job 👍👍👍😁
Fantastic job video was on point. Your attention to detail is stunning. Thank you!
Great bit of kit, I see the only thing missing is a nice cool drink while you relax & mow the grass 👍
That radio controlled mower is fantastic
waw genial
👍👍👍
Felicitaciones muy muy bueno
Add a GPS/IMU combo and an RPI. You got yourself an autonomous lawn mower
You should raid a roomba's electronics and go full automated, and have it double as security
Great build
awesome built
Kids, is this the best way to motivate your dads to do the lawn?!!
Awesome work!
Polak potrafi. Bardzo ladna robota, brawo!
It needs gps ;-)
Great video sir!
😂 Thank you 😁
That's really cool, and as with all your stuff, it's well made. Electric start, even! Kudos.
It's awesome I love it all you need know is your dog to be sitting on it awesome job guy
COOL...Now bring my lemonade !
Πολύ ωραία κατασκευή τα RC είναι ειδια με αυτά που γίνονται με τα τηλεκατευθυνομενα
Outstanding Achievement!!!
Man, you've make my oldest dream !!! And now you can add arduino controller, make program for your lawn and enjoy automatically trimming! But radio control it's fun too !!!
I admire you as a craftsman!
Great work!!!
Stay well, Joe Z
un génie ce monsieur
Now make it automatous. Love your shop.
Voila comment joindre l'utile à l'agréable 😉👍
I need one of them I'll never miss nothing on TV with this
Ein Spaßtrasenmäher gebaut für die Ewigkeit 👍
So cool! Incredible build! Kudos!
Well done! A lot of work, but end result is great.
Wow, that was really really well made. Next Lawn mower FPV? hehe almost want some grass now.
The machine is incredible. I'm in love with it. I see that there are lots of weeds. It would be easier to cut the grass if you add more grass seeds and get a broad leave selective weed killer. Then add fertilizer to the grass. Your lawn will look a lot better. Im a gardener, btw.
Awesome, what you need to do is take one of those auto floor sweepers and put the auto drive parts on that mower then you dont even have to mess with controlling it.
Really well done.
You've got some mad skills
Absolutely genius at work 👏
Great work, very organized, I'm really impressed, but you can also use solar panels to charge the batteries with your current system. Another idea: The gas engine could have been used to move the lawn mower through a mower gearbox with a clutch (The control of mower's movement by the clutch with DC actuator motor), there will be significant battery charging savings. You can also automate the system by adding some sensors with an Arduino board and some fixed reference points in the garden.👍
Nice work just add clean robot sencer
This is super talented......
This is taking lawn mower simulator to a whole new level :D
That was a first class build, now all you need to do is add a GPS and an AUTOPILOT to it and you could program it do the mowing all by it's self.