I turned water container into a working pressure tank!
Vložit
- čas přidán 11. 06. 2020
- 🙂 The goal of this video is to-give the viewers a new idea and to showcase the capacity of an
ordinary water-container how it perfectly handle a pressure up to 50psi or more (30psi recommended for safety) with a gag as my-main goal. I don't showcase here how
the engineering behind a bladder-tank works. No deep details and information was shown
through-out the video because its just for fun.
But here in the-description I will explain all the FAQs. 🙂
=============================================================
⚠️⚠️⚠️ DIS-CLAIMER: DO IT AT YOUR OWN-RISK. ⚠️⚠️⚠️
=============================================================
This is only a video-evidence, (not a DIY) of my-successful experiment in transforming
a regular 5gallons water-container (round) into a substitute pressure-tank that can hold
a standard-household water pressure of 40-60 psi!
=============================================================
This set-up was tricky. At first glanced you can-say its not a real deal.
But if you look closely and understand everything, you will find it amazing.
You can see this thing does not-have air inlet (schrader valve) like a normal
bladder-tank. But remember that the-tank used in this project was plastic.
It has an elasticity (like rubber) unlike metals. That acts as 2 in 1, a bladder, and a-tank.
The orientation of the pump and the-tank was carefully planned to ensure
a good working outcome. I placed the-tank above the pump so that the air will remain
in-tank while being compressed. I compressed the air by closing the water out-let. And
allowing the pump with water to run while the-tank is empty (nothing but air). As the
pressure rises to 50psi the-tank begun to compressed the trapped air in-side and
making the tank's top bulged. You can see the water increases to the-tank making it
60% water and 40% compressed air at 50psi. As the pump turn's off at 50psi, you-have
3-5mins (depends on how you conserve the flow of pressure) to drop the gauge to 30psi
where the pump starts-working again. As the pressure drop to 30psi, the-tank will be less-stressed
making it 40% water and 60% uncompressed air. The pump will work about 1 min
to fill the 50psi or-less if you have-a bigger pump. And now the cycle is complete.
And there you go I hope that's clarify all your questions. Thank you for watching!
=================================================================
I don't en-courage you to remake this process for safety precaution. Dealing-with pressure
is-dangerous specially above 30 psi. However if you still wanted to try, keep the pressure
below 30psi for your safety and also to prolong your materials lifespan.
=================================================================
⮞Subscribe to my-channel for more videos!⮜
/ @keytochannel
#BuildATank #DiyPressureTank #PressureTank - Jak na to + styl
muy sencillo colocar una valvula de antirretorno tipo menbrana de vacum en la parte superior con orificio a la botella y el otro lado de afuera de la valvula la conecta con entrada de vacio o vasum que se genera en la segunda entrada de la bomba , la mayoria tienen esa opcion, en este video se ve que tiene esa entrada en la bomba que no la usasn, pues bueno esa segunda entrada de la bomba , es para conectar una linea que al vacum de menbrana en la parte superior de la botella, de tal manera que cuando se enciende la bomba succiona la bomba por la entrada normal y tambien crea un vacio o succion por la otra entrada que menciones ..de la bomba .. eso forzara a mover una menbrana del regulador instalado en la parte superior de la botella,, y esta a su ves por el lado de adentro forza a succionar el aire , subiendo el nivel del agua dentro de la botella.. el agua no pasara por el reguladotr porque la menbrana del regulador no la deja pasar, la menbrana es como un chupon o succionador cuando se deforma por el efecto de vacion proveniente de la entrada de la bomba .... mientras esta encendida la bomba, envia agua de servicio y sube el nivel del agua en la botella forzado por la menbrana, al apagarse la bomba, el agua se empuja hacia abajo entregando presion de agua al servicio , estando la bomba apagada, eso sucede por la nivelacion de presiones en la parte superio del tanque el vacio o vacum se transforma ahora en presion positiva, empujando agua al servicio estando la bomba apagada
please show the water level rising and lowering and the pressures too. That would be educational since it is transparent and everyone can see it. Also the cut-in and cut-out as the water level falls and rises. Thanks
ya, that would be nice.
video is 2 years old, probably didn't last
Wow..salamat po sa video nato miron naman tayo dagdag kaalaman sa videong ito..salamat sir...
Never thought it can reached 50PSI, thanks man for sharing!!!
Nice diy,salamat sa sharing.
Very beautiful presentation. Good job, magaya nga. Thanks sir
Maraming salamat po! Feel free po to remake. Goodluck po and stay safe!
Great video, thanks.
Thank you for sharing this
You are so welcome!
napadpad ako dito kasi nag babalak mag diy ng set up na no tank😅 ang galing ng gawa mo sir, napaka simple ang linis tignan.
sir, pwede po ba malaman mga sizes ng reducer sa ginamit mu po sa may gallon?
Good job!
nice content!!
Salamat dito lods napakalaking tulong to sa mga may tubig ng puso at nakakatipid pa lods, di gaano masakit sa bulsa. Thank you for sharing this video and god bless you po. 😍
Salamat din lods, masaya din po ako na sa ganitong paraan nakaka pag share ako ng idea. Godbless din lods!
A'ight, the correct way to use plumber's tape is to wind it in the same direction as the fitting that screws on, and you only need at most 2 full turns on most small fittings. Something 2 or more inches might need 3 turns of tape from the open end to the beginning of the threads. Hate to see what happens when that plastic degrades and ruptures under 50psi. Don't place metal objects or knives nearby or they may go flying and kill someone.
isa kang alamat. galing bro. :D
nice gagawin ko din set up yan budget friendly
Thank you sir..very much
Maraming salamat din po sa pagtangkilik ng video ko. :)
good job!
Thanks! :)
Nice
Wow briliant idea
Thanks a lot! Thank you for watching. :)
Clever idea, thanks for sharing
Auto like may nakita akong lancer itlog. Thanks for the idea din po sir
Hehe..Tama po itlog nga po yun. Thank you for watching po!
galing nman
nice video
Keep it up godbless
good vid
Nice Technology
I was thinking adding bulk head to the bottom
And add a media to filter. Water goes up into check valve and out the top through filtering media
Astig content
New subscriber boss, buti nkita q 2ng video mo, thank you much😁
🤣 nice!
The safest way is to put a relief valve 55 psi if anythig goes wrong with pressure switch.
Nice one lods
thanks
Wow very informative 👍🏼
I've tested these, these bottles can go upto 200PSI before bursting, try 150PSI and your spray jet will work much better
Yes i think it can. Though I only reach around 75psi only but with no problem at all. However I don't recommend using pressure above 50psi since dealing with high pressure is deadly.
Please take precautions in that pressure someone can get serious injuries if wrong time on wrong place
@@kasunrodrigo6592 its Dangerous its what Bomb do, pressurized thing and bum
@@sayalaperbandel benar gan ide oke tapi saya takut pecah/meledak galon nya kalau yang awam diterapkan pada pompa besar dan di setting otomatis nya gak di perhitungkan ngasal
Kalau yang paham misal saya dan agan
Masih aman aman saja
are you sure? did you make a video?
😂😂😂 astig nMn
el sistema funciona perfectamente y por seguridad,, solo con poner una valvula de alivio o disparo de sobrepresion de 60 a 70 pasi , se resguarda una operacion segura
lo hiciste q tanto dura el botellon?
Pd: generalmente las bombas pequeña no pasan los 50 psi la de 1/2 de hp
thug life indeed!.. good job.. subscribing
❤️❤️❤️
Ended really stupidly! Plus these water bottles become very britle under UV light. So it would take the pressure now but would eventually explode.
Very informative!
Thank you! :)
Astig lods
Thanks :)
I used a empty window cleaner boddel and it had air and water in it and it made it pressureised
haha best !
👍👏👏💯
Bueno el proyecto
Thanks alot! Thank you for watching. :)
HI sir can i ask if it still works for daily household usage? faucet shower etc.
Nice...try it out at your risk.😎😎😎
Graet
New friend here..
This does not have a pressure bladder inside like normal pressure tanks so your pump is still going to run alot
Nope! My set-up only starts the motor at 30psi and stops on 50psi. The motor will start again if the gauge drops to 30psi. The trick is to put the water in the tank empty. And all will work like magic. The elasticity of the plastic alone act as a bladder. No need for a valve.
What your saying is true this will work for a while, that being said adding a bladder will dramatically improve the service life of the tank. I’d recommend putting in some thick balloons. Old school plumbers used to use this same technique in water hammer arresters but is no longer code
@@elmersackanay6944 do you mean normal large party balloons, I thought they would eventually deflate? Do you inflate multiple balloons next to each other inside the. Bottle?
Interesting I'm poor need a cheap solution...thanks in advance🌈🙏🏻👍
You noticed this as well. The plastic tank is a pointless exercise. It does not do the job of an accumulator. Could simply put a t-fitting in pressure line for the pressure switch. The plastic tank does nothing.
I turn playdoh into a nuclear weapon.
I want to do sth. similar, use the water container just as air tank for my airbrush compressor. Do you know what size that adapter is? Is it 1 1/2 inch?
does it still work? How long did the bottle last?
wow
Thank you! :)
Kreatif, cuma sedikit membahayakan kalau tekanan tinggi takut bisa saja meleudoss galon nya.
🤣🤣🤣
Kasih aja jet pump 500w gan meledak itu galon
Ku iseng pernah uji coba galon le mineral itu pecah meledak gan
Karena dari pompa distribusi langsung di kantor 😁🙏 penasaran saya tahan sampai brp bar dia
6 bar max SOP nya
Kayak nya gak nyampe 6 bar sudah meledak itu galon
Nanti kapan kapan saya iseng lagi sambil di video kalau ada piket malam
Kerana itu juga ide dari rasa penasaran teman kerja saya
Soal nya kencang BKN main semprotan yang bikinan dia sendiri pakai tutup botol kecap di sambung ke pipa sudah serasa mesin steam gan perih njir kalau kena tangan
Maklum pusat nya air bersih sebagian kota😁🙏
@@bangherlambang3226500w bisa meledak? yg bener om jet pump 500w maksimal cuman 4bar
sir good pm..what size of the black connector your using the blue bottle of water?
hey, when the bottle is empty, the pressure should go back to the normal slow flow rate right?
Ayos bro..
Cool one, Poor pikachus
Yeah naughty squirtle! 😆🤣😂
May motor po ako,gusto ko i DIY water pressure para pang car wash..pwede kaya APC pra d nako kaglagay ng pressure tank?
Boss tanong lang po kun hindi nag over heating kahit sa garden hose or shower ang ginagamit?
good job !...what about a schrader valve,for air intake to the tank???
This one don't need a schrader valve or air intake it only relies on its water pump's power to compress air in the tank.
@@KeytoChannel झझझझझजख
@@KeytoChannel si lo necesita de lo contrario va a encender constantemente
Nope! My set-up only starts the motor at 30psi and stops on 50psi. The motor will start again if the gauge drops to 30psi. The trick is to put the water in the tank while it's empty. And all will work like magic. No need for a valve.
Y lo otro que debo comentar es que es una muy brillante idea es un crack
No explode bottle ?
sir kaya ba ng makina nyan humigop ng lalim ng isang tubo? o 24 feet na lalim
You did not show the reason for having a pressure tank and that is the amount of draw down so the pump is not on continuously.
The answer to your question is that little "Pressure Switch". It cuts the the pump power off after reaching the your designated pressure.
@@KeytoChannel I know that but the pump works continuously and a pressure tank prolongs the life of the pump.
Qualified plumbers will recommend the installation of a pressure tank even a small one.
You can get minimal air pressure by allowing the motor with water to run while the container is empty. Trapped air inside the tank will compress and serve as a passive air pressure though its minimal, but it works. I only use it for cleaning so the pump will not work for that long.
Is the meter necessesary?
Did you adjust the pressure switch or just left it as is (40/60)?
I adjust to make it lower. 30/50
Don't think it will work for me. This thing goes to 60psi plus. I tried a different pressure switch with no success. So the original digital one works
hey i need to know how much does this weigh
anung hp un gamit mong motor boss??
thank for great invent
parang di ko nakita ung pagpasok ng tubig doon sa water container.
Next project is artificial pressure lungs for covid patients
😂🤣 LOL
Sir update naman.
Why do you still need the water pump?
3rd floor pwede po ito?
Can you make this with a drum.
Oke mantap juga tapi ada kelemahan yang cukup fatal
Lepas sambungan nya auto jadi roket galon nya 😁🙏
Atau settingan pressure switch terlalu kuat duarrrr pecah/meledak galon nya
Betul gan 50 PSI itu lumayan tinggi, kalau lepas habis lah tuh meleudoss galon nya sampai ke luar angkasa.
🤣🤣🤣🤣🤣🤣🤣
How to avail this products of your's pls
Noce
hello new friend here😊
Thanks for coming!
ano po ang size ng reducer? salamat
How it's working without air pressure inside the tank,
Please read the video description. Thank you for watching!
Yes useless design. The main purpose of the press tnk is to prevent excessive running of pump and build up press The line which is going to the press tank are same of the outle valve.
Boss pwede ba gamitin e yun pressure tank na 21gals?
Ung cylindrical blue tank po ba? Pwede din po cguro sa lower pressure 30psi below po. Pag mataas na kasi baka ma deformed ang hugis.
you didnt show the bottle filling. or the air bubble in it.
This is a 101 in How to waste time. plastic will fatigue and is not UV stabilized.
Coba pakai jet pump 😀😀🙏🏻🖐️😱 💥
Auto duarrrrr meledak galon nya
Hmm
Lods ilang watts booster pump na gamit nio jan?
1/4 hp po, mga nasa 186 watts po.
I've got a water transfer pump..will this work for my pump?
It depends to a kind of water pump. here in this video I only used a water booster pump with 1/4 horse power (HP). The bigger the HP (like 1/2 HP or higher) the better.
@@KeytoChannel ok thank u
You're welcome!
where the refill connection? 😂😂😂😂
diaphragm tank, pero nabubutas din in the long run and cut in and cut out were predetermined, alam ko Sir me water sensor ngayon tankless na, late nako isang dekada mahigit
%)))))))))))))))
%)))))))))))))))))))))
camera don't focus at tank while pump working.
air in water tank will mix to the water soon. then it can't make pressure before pump start
it can be only water hammer helping
this method like air pressure tank pump
but don't have air charger like air pressure pump
the air pressure in your water tank will drop in very soon.
Wala bang tubig na papasok sa pressure tank master?
Sir pwed po ba gamitin ang pressure gauge sa compressor na png vulcanising?
Opo pwede din po nman.
Booster pump! Bakit walang pressure gauge sa plastic tank kung kaya talaga sa 50 psi or below 4 bar. Alin mas matibay gulong sa sasakyan 33 psi lang below 40psi o plastic tank? Kung segundo lang medyo kaya pa pero abutin ng isang oras na pressurize di kaya sasabog ?
What is the switch you fixed before the pressure gauge? What the technical name of it and purpose?
Pressure control switch
kaya ba ng 50 PSI ang container na yan?
pwede ba ako gumamit ng malaking plastic drum yung kulay blue...?? thanks
Hindi po pwede ang drum na blue. Ang shape nya po ay hindi naka design for pressurized.
Hindi ba mabasag yan sir kc container lang ng tubig ginamit mo?😊
Hindi nman po. As the moment po 6 months na ang nakalipas at ok parin nman container na yan sa bahay. :)
Có thấy mạnh hơn tí nào đâu