2018 Ford Vehicles Including Explorer F150 OEM Remote Start Perimeter Plus Install & Programming

In this video I will show you how to install the JS7Z-19A361-A amzn.to/3S54Co5 OEM Perimeter Plus security and remote start module in a base model 2018 Explorer. I'm using this programmer ebay.us/t6pyII in this video, but this cheaper one amzn.to/3I5fEFm will work with Forscan quite well also. You will need to download Forscan forscan.org/do... on a Windows computer and get an Extended license, which is free. forscan.org/su...
Or, if you have access to Ford IDS or FDRS, you can use that as well to enable the remote start system. If you dont have a hood pin, on the Explorer you will need the following parts in addition to add the hood pin and wiring harness. BT4Z19G366A and GB5Z14B504A. For more info, check out accessories.fo...
This video is applicable to the following vehicles, which all use the same Perimeter Plus module.
Ford Edge 2018
Ford Expedition 2018
Ford Explorer 2018-2019
Ford F-150 2018
Ford Fusion 2018
Ford Mustang 2018
Ford Super Duty 2018
Lincoln Continental 2018
Lincoln MKC 2018-2019
Lincoln MKX 2018
Lincoln MKZ 2018
Lincoln Navigator 2018
(Amazon Paid Links Above)
Disclaimer: The information, demonstration and any content contained in this video is for entertainment and informational purposes only. We make no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. We shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by us and therefore, we do not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge us or anyone affiliated with us, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

[@jjrimz99tandem_drifter]

Installed the hood switch but the car doesnt recognize, the pin is in and confirmed and i added ground but nothing

[@firasghanem6041]

Great Video.Base models are lots of work indeed. I had the same experience. Using the 12Volt Solution. Running the hood switch was tricky. The remote start menu is not showing, and the AC is acting funny, first 30sec or so, the front works, slightly cooling, then it switches off, the rear kicks in, but max heating. I wonder if activating the IPC remote start Climate Control it will fix the issue

[@JackofAllMasterofNone]

It should fix it. You definitely need the make the changes to the BCM and IPC in order for the system to function properly

[@Scott-yq1qr]

Why do you have to turn the Perimeter Alarm to disabled. Is this so you don’t need the pigtail? Does this keep the factory perimeter and perimeter plus from having an issue working together?

[@JackofAllMasterofNone]

Yes. It allows the factory alarm to work normally.

[@Scott-yq1qr]

Does the remote start have a jumper for if the vehicle has the factory permitter security? If not will it work with it or cause problems?

[@JackofAllMasterofNone]

It does have the jumper.

[@ericrainey5361]

I installed my alarm and it does nothing. Do you need to program it?

[@JackofAllMasterofNone]

You do what I did in the video. Did you try locking doors with remote. Have window down. Then reach inside and open door. Alarm should sound. If not, something isn't right.

[@ericrainey5361]

@JackofAllMasterofNone when you installed it, did it automatically turn on and recognize it? Did you have to enable it in forscan first?