Another great thing about the automatics with handwinding feature is that you dont have to worry about the overwinding. If a full charge needs, lets say, 40 turns of the crown and you give them 50 you wont break anything cos when fully charge the winding mechanism disconects.
A great movement... Pagani Design seem to be using this in the majority of their watches now.. Even the 7S26 was a great movement.. ..and my dad's seiko watch is still going strong to date since December 1999 without service. That's 23 years and 6 months to date with ongoing accuracy....without a service needed
I have had a Steeldive SD1969 with an NH35 for 18 months. With a little effort I managed to regulate the movement to 0 beat error and +2 sec per day. The amplitude of the movement is on the low side but this does not seem to have an obvious negative effect. The watch runs fastest with the movement upside down (watch face down). Should your watch run a little slow over the course of 24 hours, place it face down during the night and see if it catches up.
"Should your watch run a little slow over the course of 24 hours, place it face down during the night and see if it catches up" Interesting! I might try that! Thanks!
@@sumahama1981 That works for my watch that has an NH35. I have no idea if that's consistent behavior among all NH35 movements. However, you should be able to find a position in which your watch runs faster or slower than in does in any other position and you can use that property to your advantage.
Im relieved to hear that adjusting the day/date at the wrong time doesn't necessarily damage this movement. "Foolproof" sounds nice but there still is a warning. They were keen to say it "may damage" in the manual so probably okay if you slip up.
I had an omega seamaster 300 brand new the date stopped working. Maybe someone at the store changed the date at the wrong time in the evening. Nevertheless the warranty covered it and I was without the watch for 3 months. Never had a seiko break on me. The omega is a $6000 Watch.
Thank you so much for this informative video on the Seiko movement. I've read about several micro-brands and homage watches being equipped with this movement, and had wondered about the quality of the movement. Of course the "Seiko" name alone speaks volumes in and of itself.
My San Martin Ranger 36mm has the NH35 in it and is running at + 0.2 seconds a day out of the box. Great movement that's affordable and easy to work on. No negatives here!
The movement is a stunner. With care and an ability to move the regulator in hair's width increments, the accuracy can be brought down to within the Swiss qualification for a chronometer (-4 to +6 secs a day). My example is in a military watch and is around +3 seconds a day. This is better than some quartz movements. Quite how they cram all that synchronisation into such a small package is genius.
It is no better but still impressive for mechanical movement in this price range. None of mechanical movements can come close to quartz accuracy, especially if you want to use mechanical movement outside laboratory. The worst quartz movements have max deviation 1 second per day, no matter of its position or temperature. Even Rolex can't do it. My cheap (~20$) Casio F-91W has +2 /+3 seconds of deviation... per month.
@@SillyVintageWatcheshi sir. Can U explain the NH34 movement?. Too many GMT watches at the market use this movement. I need to know. ❤ Is it good to use around 4/6 years above without any service?
To me this movement is one of the greatest ever. Very robust and reliable. I got a unicorn running +/- 1 sec a day, but my other two running about 10-12 and other 35. Shows you how wide the range is so I need to regulate it myself. At least its very precise!
Great video, thank you for this. The issue that weirds me out about these movements, as they are put into watches, is this: ....why doesnt anyone set them right? I have two watches running each of these movements, one is -7 seconds per day, the other +26 seconds per day. It is literally amazing how accurate these watches are......and wrong. Im not a watch guy but if they can get the movement to run at precisely +26 seconds per day, for over two years, is it not possible to test this before they throw it out of the shop?
Can I get some opinions on whether or not it’s perfectly safe to wind (even daily) an automatic watch? Personally I LOVE the connection to the watch that hand winding gives, but I obviously don’t want to put undo wear and tear on my watch either.
If you look at the balance wheel you can't see it moving. The engineering is that precise. But, when I look at other movements even the Rolex 3135, ETA 2824-2 I see the balance wheel wobbling as if its off balance, like a spin top that is running out of 'steam'. I am no expert, but I'm sure a wobbling balance wheel isn't good in the long term. I have the Marathon 34mm General Purpose Field Mechanical watch with the NH35 in it. The watch, which come in EAT-F06 quartz and NH35 mechanical is issue to military personal. I was told by a miliary ordnance supplier the mechanical version is issued to covert operatives for its reliability; and for potential use in ATEX/ hazardous environment zones.
One week later after adjusting multiple times the speed of the 4R35 in my King Samurai (SRPE35K1), I've finally hit the "sweet spot", and now it runs with only between +-5 to 10 sec. per day! I highly recommend you do it yourself with your own wristwatch tools kit.
Crazy how many people actually care about precise time. I normally set my watches 1-5 minutes fast and know that I am generally going to be on time wherever I'm going.
I tried that back when I was in the world several times and it eventually drove me insane. Don’t know why but I’m the type who has to have my watch say the correct time. Of course I have to leave earlier. : )
I have six watches with this movement. Three seikos and three micro brands. You get more value from micro brands with sapphire crystal and over 100m water resistant. Unique designs with the same movement. Just do some research on the micro brands you are looking at.
What about the pretty low amplitude of this Seiko movement. Personnally, I was unlucky with a 4R36 inside a King turtle. Even with a big watch price tag, the movement was unreliable. The regulation was not bad, but the amplitude was around 230° on the timegrapher with a new movement fully wind and the good 53° lift angle set, seem not good even for Seiko movement. The deviation was big when I was walking, but good for an office day.
True (to some degree). As far as I remember, two plastic wheels are used for the date mechanism. They are not relevant for the timekeeping part of the watch. In the date, they even make sense, since they don't require lubrication and are exposed to very little wear. I would also suspect that they are lighter than wheels made from metal, and therefore help with accuracy during date changes and help increase the power reserve. But that's my assumption.
According to watchcaliber the nh35 caliber are made in Japan or in Malaysia and is written on the rotor( it writes Japan or Malaysia close to the center of the rotor).Most of the nh35 that I have on my watches doesn’t have that sign at the rotor (the same with that movement at the video)That means that they are clones that they are coming from china? What is going on? I’m confused if you have an answer I will appreciate it! Thanks
Hi, thanks for your comment! The SKX never came with the NH36 /4R36. It always came with the 7s26 and that never had hacking or hand-winding. But you can swap the 7s26 in your SKX for a NH36, I made a video about it. czcams.com/video/JzrTXkieUN8/video.html
I have Seiko Monster 2nd gen with 4r36 and there is some plastic part inside ( for date i believe). Can you explain why and how it affects other parts and the mechanism in general? Thanks
"True (to some degree). As far as I remember, two plastic wheels are used for the date mechanism. They are not relevant for the timekeeping part of the watch. In the date, they even make sense, since they don't require lubrication and are exposed to very little wear. I would also suspect that they are lighter than wheels made from metal, and therefore help with accuracy during date changes and help increase the power reserve. But that's my assumption." - Silly Vintage Watches
Adjust the beat error as close to 0 as you can and then adjust the rate as close to +/- 0 sec per day as possible. Then see how many seconds per day you are off on average and correct for that. If you want to go crazy you can adjust in several positions and various temperatures and find a happy average that works for you. I can with a little effort regulate my watches usually to within 0 to +4 seconds. You do need a timegrapher, a dust-free room with clean air, and the tools to open and regulate the watch. You will also need a new case back seal and seal lubricant.
The way you ask, I would generally say yes. But the two movements are hard to compare to each other since they sort of belong to different price categories. To answer you more precisely: they both do well in their respective categories.
I own several Swiss watches with the SW-200 movements. They are solid and reliable except for one caveat, they are susceptible to overwinding. If they are overwound, there is a risk of shearing the teeth off of one of the gears.
Seiko movements have a reputation of being watches that just keep going and going. However, I would service them about every 6-7 years or as soon as you recognize a change in performance. With cheaper models that utilize cheaper movements, like the NH36 NH35 NH34 or NH38 you can get away with having them run longer and then replacing the entire movement altogether.
Got a Zelos Hammerhead V3 with Seiko NH35 movement inside. All seems to work fine except i feel no resistance at all while hand winding the crown. The hand wind basically spins almost freely. Please advise if this is a problem or if this is how it winds ..
Indeed, the hand winding is very very light. You don't get much feedback, even if the watch is fully wound. If the watch runs out of power, does it start right up if you pick it up and start winding it?
@@SillyVintageWatches it doesn't work. I got it checked at a service centre and they confirmed a part broken in the movement. Zelos is sending me a replacement NH35 movement.
Hi! I have a Spinnaker that runs on an NH35 movement and I'm troubled by an issue. My watch runs wildly. Within 15 minutes, the time fluctuates (if that is the correct term) like it's getting delayed by 5 mins then it's going to advance by 5 mins. This keeps on happening within the span of 15 mins. There is even a time when it stops running while it's powered up and on my wrist.
I have exactly the same with a new NH34 movement. Also the amplitude is between 165 and 179 and the beat error is 1.1. I wonder what is wrong, but I suspect their quality control is also not fully up to par
The problem would be that labor even without spare parts will far exceed the price of a new movement. An NH35 can be had for $35 to $50. The pallet jewels will certainly wear over the years. The oils used will become dirty and eventually increase wear on the pivots. An NH35 should be capable of running a decade without service or movement swap.
@@rosomak8244Well, unless you are hobby watchmaker capable of servicing and replacing wear parts, an NH35 is a throw-away movement because having it serviced will cost more than several new NH35 movements. Who is going to pay as much for an overhaul as he would for a new watch? An HH 35 is $40 retail price movement. How much is the wholesale price? As for degradation, yes, of course. But yeah NH35 movements can and often do run for over 10 years reasonably well without s service. It's also unlikely that a person will wear only watch all the time during that long a time period. What's acceptable as far as accuracy and pecsion go is an individual matter. The NH35 is a very simple movement. Something much more complex like a 7750 will usually need to have some parts replaced every 5 to 7 years or bad things will happen. I'm not saying you should not service an NH35. All I;m saying is it's not a fiscally reasonable endeavor for most people under normal circumstances. Yes, you don't thtoem out a a $1,000 movement because it needs a $600 service, but who will pay $200 to service a $40 movement?
The NH35/36 has a power reserve of about 41 hours. If the watch stops, it's usually good to give it a couple of turns by hand. The automatic winding takes a couple of hours of movement to fully wind the watch to its full power reserve. If the watch is not worn for long enough during the day or is not moved enough, it can not recharge itself on a daily basis and might stop at some point. If the watch is older than 5-6 years, it might also be due for a service, depending on its condition.
Most days I'm pretty sedentary (like on the computer or reading or watching TV) and the problem I've had with the 7s26 is that the automatic function isn't efficient enough to keep it wound. Does the NH36 share that same automatic mechanism?
Here is a full review of the MIYOTA 8215 / 8205: czcams.com/video/iCIbLyXq0ho/video.html
Another great thing about the automatics with handwinding feature is that you dont have to worry about the overwinding. If a full charge needs, lets say, 40 turns of the crown and you give them 50 you wont break anything cos when fully charge the winding mechanism disconects.
I was looking for this comment and confirmation! Thank you !
@@Angel_cp4 my pleasure. Its worth though to check the manual cos its like that 100% in the modern ones. I do not know in old vintage mecanisms.
And this is an improvement over the Swiss SW-200 movement which, if you are not careful, you can overwind and shear the teeth off of one of the gears.
@@clontstable1 Thanks for the tip, I didn't know about that !
@@clontstable1 Not just the Selita SW-200, but the ETA 2824 in which the sw-200 is based/copied off is also very prone to this issue.
A great movement... Pagani Design seem to be using this in the majority of their watches now.. Even the 7S26 was a great movement.. ..and my dad's seiko watch is still going strong to date since December 1999 without service. That's 23 years and 6 months to date with ongoing accuracy....without a service needed
that already beats some Swiss movement that has to service about 5/8 years once . Impressive
I've got a Seiko quartz chronograph that I've had since I was 12 years old. I'm now 38. No service. Just new batteries.
@@donhoward4218 The Seiko watch will live longer than a human lol
I have had a Steeldive SD1969 with an NH35 for 18 months. With a little effort I managed to regulate the movement to 0 beat error and +2 sec per day. The amplitude of the movement is on the low side but this does not seem to have an obvious negative effect. The watch runs fastest with the movement upside down (watch face down). Should your watch run a little slow over the course of 24 hours, place it face down during the night and see if it catches up.
"Should your watch run a little slow over the course of 24 hours, place it face down during the night and see if it catches up"
Interesting! I might try that! Thanks!
@@sumahama1981 That works for my watch that has an NH35. I have no idea if that's consistent behavior among all NH35 movements. However, you should be able to find a position in which your watch runs faster or slower than in does in any other position and you can use that property to your advantage.
Im relieved to hear that adjusting the day/date at the wrong time doesn't necessarily damage this movement. "Foolproof" sounds nice but there still is a warning. They were keen to say it "may damage" in the manual so probably okay if you slip up.
I had an omega seamaster 300 brand new the date stopped working. Maybe someone at the store changed the date at the wrong time in the evening. Nevertheless the warranty covered it and I was without the watch for 3 months. Never had a seiko break on me. The omega is a $6000
Watch.
Thank you so much for this informative video on the Seiko movement. I've read about several micro-brands and homage watches being equipped with this movement, and had wondered about the quality of the movement. Of course the "Seiko" name alone speaks volumes in and of itself.
My San Martin Ranger 36mm has the NH35 in it and is running at + 0.2 seconds a day out of the box. Great movement that's affordable and easy to work on. No negatives here!
0.2 of a second ?
I think he meant 2 seconds. My prodiver is very close to -2 sec a day. Had it since 2020 an wear it 24hrs daily
It is possible.
Thank you I totally overlooked this watch movement!
The movement is a stunner.
With care and an ability to move the regulator in hair's width increments, the accuracy can be brought down to within the Swiss qualification for a chronometer (-4 to +6 secs a day).
My example is in a military watch and is around +3 seconds a day. This is better than some quartz movements.
Quite how they cram all that synchronisation into such a small package is genius.
It is no better but still impressive for mechanical movement in this price range.
None of mechanical movements can come close to quartz accuracy, especially if you want to use mechanical movement outside laboratory.
The worst quartz movements have max deviation 1 second per day, no matter of its position or temperature. Even Rolex can't do it. My cheap (~20$) Casio F-91W has +2 /+3 seconds of deviation... per month.
Thanks for the info on this movement, I really appreciate a professional opinion.
Glad it was helpful!
Excellent video, well done. Easy to understand, great quality. Thank you!
So happy with my 4r35, out the box it's losing only about 35 seconds a month.
Even though I’m not a watchmaker, I like watches and did enjoy this video. Please make more movement videos like this!
Will do! Seagull, Miyota and others are in the making!
@@SillyVintageWatcheshi sir. Can U explain the NH34 movement?. Too many GMT watches at the market use this movement. I need to know. ❤ Is it good to use around 4/6 years above without any service?
Good video 👍🏼 . I am beginner, just done my first disassembly/assembly. 4R36. Thanks for the video.
5:50 fully agree !! + easy to repair (i did on a lot of broken, rusted ones ...)
To me this movement is one of the greatest ever. Very robust and reliable. I got a unicorn running +/- 1 sec a day, but my other two running about 10-12 and other 35. Shows you how wide the range is so I need to regulate it myself. At least its very precise!
Thank you very much for this wonderful review of the movement! Regards!
4R36 Sports 5 here. Price point is fantastic.
Very clear and interesting. Thank you!
Great overview of these movements
Great video, thank you for this.
The issue that weirds me out about these movements, as they are put into watches, is this:
....why doesnt anyone set them right?
I have two watches running each of these movements, one is -7 seconds per day, the other +26 seconds per day.
It is literally amazing how accurate these watches are......and wrong.
Im not a watch guy but if they can get the movement to run at precisely +26 seconds per day, for over two years, is it not possible to test this before they throw it out of the shop?
Yep but then as time is money the cost of the watch goes up.
when did seiko first make it?
My nh35 runs GREAT... like, wearing it 24hrs a day, it gains about 1 second a day... its impressive.
Dang, mine runs about 20 seconds fast a day. I'll have to get that addressed when getting it serviced.
@@Tunkkistry demagnetizing it before you get it serviced
Уточните после 6 месяца !! Нет второй недели когда купили.
Can I get some opinions on whether or not it’s perfectly safe to wind (even daily) an automatic watch? Personally I LOVE the connection to the watch that hand winding gives, but I obviously don’t want to put undo wear and tear on my watch either.
You can't overwind an automatic.
My Spinnaker watch had stopped twice and I thought it was defective. Now I know it is movement powered.
I have a mechinacal watch with a NH35A as its core. Its very reliable and works really well so I can only say good stuff about this movement
If you look at the balance wheel you can't see it moving. The engineering is that precise. But, when I look at other movements even the Rolex 3135, ETA 2824-2 I see the balance wheel wobbling as if its off balance, like a spin top that is running out of 'steam'. I am no expert, but I'm sure a wobbling balance wheel isn't good in the long term. I have the Marathon 34mm General Purpose Field Mechanical watch with the NH35 in it. The watch, which come in EAT-F06 quartz and NH35 mechanical is issue to military personal. I was told by a miliary ordnance supplier the mechanical version is issued to covert operatives for its reliability; and for potential use in ATEX/ hazardous environment zones.
One week later after adjusting multiple times the speed of the 4R35 in my King Samurai (SRPE35K1), I've finally hit the "sweet spot", and now it runs with only between +-5 to 10 sec. per day!
I highly recommend you do it yourself with your own wristwatch tools kit.
Crazy how many people actually care about precise time. I normally set my watches 1-5 minutes fast and know that I am generally going to be on time wherever I'm going.
I tried that back when I was in the world several times and it eventually drove me insane. Don’t know why but I’m the type who has to have my watch say the correct time.
Of course I have to leave earlier. : )
And remember to take some pictures!
I have six watches with this movement. Three seikos and three micro brands. You get more value from micro brands with sapphire crystal and over 100m water resistant. Unique designs with the same movement. Just do some research on the micro brands you are looking at.
Pagani with sapphire crystal & solid stainless steel body is on 🔥🔥🔥
Agreed. Zelos and Islander are well ahead of many more expensive manufacturers in my eyes
What about the pretty low amplitude of this Seiko movement. Personnally, I was unlucky with a 4R36 inside a King turtle. Even with a big watch price tag, the movement was unreliable. The regulation was not bad, but the amplitude was around 230° on the timegrapher with a new movement fully wind and the good 53° lift angle set, seem not good even for Seiko movement. The deviation was big when I was walking, but good for an office day.
Espectacular, gran video, gracias.
I have the Invicta Pro Diver with this movement 😅
Great video, thanks for doing it.
Just bagged a pagani design with nh35 for 25 beans 😎
EXCELENTE MACHINE SEIKO 👍👍👍 🇧🇷
Tnks 👍🏼
Where are the good ones sold? Really appreciate info.
Am i right in thinking that one does not need to wind crown but from movement of wrist watch winds itself?? Thanks
The NH35 when well adjusted, It has the accuracy of many quartz watch (15 sec/month). Is my personal experience
I just bought a Seiko 5 Sport (15 Aug 24) with this 4R 36 Caliber. It adds 1-2+ minutes a day. What do you think? Does it have any problem?
Thanks for the video!
Seen a deconstruction video of these. Seems like they contain some wheels made of plastic. True? thoughts?
True (to some degree). As far as I remember, two plastic wheels are used for the date mechanism. They are not relevant for the timekeeping part of the watch. In the date, they even make sense, since they don't require lubrication and are exposed to very little wear. I would also suspect that they are lighter than wheels made from metal, and therefore help with accuracy during date changes and help increase the power reserve.
But that's my assumption.
I agree.....
Great vid.
According to watchcaliber the nh35 caliber are made in Japan or in Malaysia and is written on the rotor( it writes Japan or Malaysia close to the center of the rotor).Most of the nh35 that I have on my watches doesn’t have that sign at the rotor (the same with that movement at the video)That means that they are clones that they are coming from china? What is going on? I’m confused if you have an answer I will appreciate it! Thanks
I believe some are made under license in China.
There is a third SEIKO owned factory in Hong-Kong making them. Time Module Incorporation.
Great video! 👏
Thanks!
To be fair, you get all the same things plus some decoration and better accuracy from miyota at a very small premium
How much do these normally cost?
Like 50.00 bucks, the seiko branded ones 4r35 4r36 etc area little more.
Thanks for the video, I just got 2 Seiko with this movement for a daily watch , :) , $239 each
Good choice!
Great video
Thanks!
I've heard Orient makes better more accurate movements at the same price range. Is this true?
I'm curious..... is it worth getting a cheapish movement like this serviced and how much would it cost??
Number 1.. no...
Number 2, more than a whole new movement.
Excellent video. Do you know if 4R35 and 4R36 movements have plastic parts?
Yes, they do. But only in the date setting mechanism, as far as I know.
I guess I have an older one in my skx no hacking or hand winding. When was it updated?
Hi, thanks for your comment! The SKX never came with the NH36 /4R36. It always came with the 7s26 and that never had hacking or hand-winding. But you can swap the 7s26 in your SKX for a NH36, I made a video about it. czcams.com/video/JzrTXkieUN8/video.html
What's the difference between Japanese or Chinese made movement? Where can I buy Japanese?
There is no difference at all. They are not made in Japan any more. They are produced in Malaysia or Hong-Kong.
My NH35 rotor seems not moving freely, is it normal?
I have Seiko Monster 2nd gen with 4r36 and there is some plastic part inside ( for date i believe). Can you explain why and how it affects other parts and the mechanism in general? Thanks
"True (to some degree). As far as I remember, two plastic wheels are used for the date mechanism. They are not relevant for the timekeeping part of the watch. In the date, they even make sense, since they don't require lubrication and are exposed to very little wear. I would also suspect that they are lighter than wheels made from metal, and therefore help with accuracy during date changes and help increase the power reserve.
But that's my assumption." - Silly Vintage Watches
Great help thanks
Good video.
So how do you tune the watch to get the low 5-6 sec accuracy?
Adjust the beat error as close to 0 as you can and then adjust the rate as close to +/- 0 sec per day as possible. Then see how many seconds per day you are off on average and correct for that. If you want to go crazy you can adjust in several positions and various temperatures and find a happy average that works for you. I can with a little effort regulate my watches usually to within 0 to +4 seconds. You do need a timegrapher, a dust-free room with clean air, and the tools to open and regulate the watch. You will also need a new case back seal and seal lubricant.
what size of watch case will this fit?
Great video would you say the Sw200 is better than this MOVT? Thanks 🙏
The way you ask, I would generally say yes. But the two movements are hard to compare to each other since they sort of belong to different price categories. To answer you more precisely: they both do well in their respective categories.
I own several Swiss watches with the SW-200 movements. They are solid and reliable except for one caveat, they are susceptible to overwinding. If they are overwound, there is a risk of shearing the teeth off of one of the gears.
Great video.
How reliable are these ? After how many years do you need to get them serviced ?
Seiko movements have a reputation of being watches that just keep going and going. However, I would service them about every 6-7 years or as soon as you recognize a change in performance. With cheaper models that utilize cheaper movements, like the NH36 NH35 NH34 or NH38 you can get away with having them run longer and then replacing the entire movement altogether.
@@SillyVintageWatches thanks for the response.
Got a Zelos Hammerhead V3 with Seiko NH35 movement inside. All seems to work fine except i feel no resistance at all while hand winding the crown. The hand wind basically spins almost freely. Please advise if this is a problem or if this is how it winds ..
Indeed, the hand winding is very very light. You don't get much feedback, even if the watch is fully wound. If the watch runs out of power, does it start right up if you pick it up and start winding it?
@@SillyVintageWatches it doesn't work. I got it checked at a service centre and they confirmed a part broken in the movement. Zelos is sending me a replacement NH35 movement.
When my watch with 4r35 movement will die can i replace it with a 4r36
Yes, you can, but you will have to change the dial if you want to use the weekday function of the 4r36.
Anti magnetic?
does it have a overwinding protection ?
My understanding is that it does.
exactly
Hi! I have a Spinnaker that runs on an NH35 movement and I'm troubled by an issue. My watch runs wildly. Within 15 minutes, the time fluctuates (if that is the correct term) like it's getting delayed by 5 mins then it's going to advance by 5 mins. This keeps on happening within the span of 15 mins. There is even a time when it stops running while it's powered up and on my wrist.
I have exactly the same with a new NH34 movement. Also the amplitude is between 165 and 179 and the beat error is 1.1. I wonder what is wrong, but I suspect their quality control is also not fully up to par
Sounds like the movement could be magnetized. It’s a pretty simple fix, most jewelers can do it
I know these are fairly cheap to replace but I am curious how long can these last with the proper maintenance every 5 years? A lifetime maybe?
The problem would be that labor even without spare parts will far exceed the price of a new movement. An NH35 can be had for $35 to $50. The pallet jewels will certainly wear over the years. The oils used will become dirty and eventually increase wear on the pivots. An NH35 should be capable of running a decade without service or movement swap.
@@chronocommander007 A decade is a huge exaggeration. It may run. However serious precision degradation will be noticeable after about 3 years.
@@rosomak8244Well, unless you are hobby watchmaker capable of servicing and replacing wear parts, an NH35 is a throw-away movement because having it serviced will cost more than several new NH35 movements. Who is going to pay as much for an overhaul as he would for a new watch? An HH 35 is $40 retail price movement. How much is the wholesale price? As for degradation, yes, of course. But yeah NH35 movements can and often do run for over 10 years reasonably well without s service. It's also unlikely that a person will wear only watch all the time during that long a time period. What's acceptable as far as accuracy and pecsion go is an individual matter. The NH35 is a very simple movement. Something much more complex like a 7750 will usually need to have some parts replaced every 5 to 7 years or bad things will happen. I'm not saying you should not service an NH35. All I;m saying is it's not a fiscally reasonable endeavor for most people under normal circumstances. Yes, you don't thtoem out a a $1,000 movement because it needs a $600 service, but who will pay $200 to service a $40 movement?
Nah not always. I have an unserviced NH35 over eight still running +12 per day. I can live with that. I think it will hit a decade
I want to fit in the case how many millimeter case is required to fit the watch
The NH35/36 should have a casing diameter (including the gray movement ring) of 29,36mm.
With hacking and hand winding can I still wind my watch on a watch winder?
Yes you can
I just got a watch with the NH36, if I shake my arm close to my ear I can hear the rotor spin, is this normal or should I be worried?
It’s normal
😉in terms of accuracy is the nh35 the same as nh38?
I would pretty much say so. The construction is essentially the same.
I have a seiko 5 SNKE03KC with 7s26c movement is it possible to replace it with a nh36?
Yes, there are a bunch of vids showing the swap. Not to hard.
My San Martin has that engine :)
Mine stops and has to be manually wound am I doing something wrong?
The NH35/36 has a power reserve of about 41 hours. If the watch stops, it's usually good to give it a couple of turns by hand. The automatic winding takes a couple of hours of movement to fully wind the watch to its full power reserve. If the watch is not worn for long enough during the day or is not moved enough, it can not recharge itself on a daily basis and might stop at some point. If the watch is older than 5-6 years, it might also be due for a service, depending on its condition.
Can you use the crown from the nh35 in the nh36
Yes
Pagani Design PD 1639 does it have real NH35 movement?
Yes, it does seems to have the NH35A movement.
can it be overwound manually?
No, it can not.
your opinion on this movement vs the miyota 9015?
The miyota 9015 has a smoother movement.
Most days I'm pretty sedentary (like on the computer or reading or watching TV) and the problem I've had with the 7s26 is that the automatic function isn't efficient enough to keep it wound. Does the NH36 share that same automatic mechanism?
It is essentially the same technologie and works in the same way, yes.
tnx