GEPRC Moz7, 7 inch long-range drone with Emax Eco II 2807 1300kv motors + M10 GPS setup
Vložit
- čas přidán 28. 05. 2024
- The Moz7 is the latest 7.5 long-range quad from @geprc It's beautifully designed, it flies super smooth, and with the right batteries you can get up to 30 minutes of flight time!
GepRC Moz7 👉 bit.ly/GEPMoz7
GepRC Croc7 👉 bit.ly/Croc75V3
Emax 2807 Motors 👉 bit.ly/Emax2807
8000mah battery 🤯 bit.ly/8000mah
**Save 5% at GEPRC with code "fpv5"
I built mine up using @EMAXUSA EcoII 2807 1300kv motors. I chose these motors for this long-range build because I was looking for a balance between power & efficiency, and these 2807's are quite a bit lighter than GepRC's 2809's.
Here is is on GetFPV: bit.ly/GetMoz7
I also included a chapter on how I setup and use GPS in my drone - Yes, I have lost long-range drone before 😭. But never again since now I log GPS telemetry data in my radio in two ways 😀
Timestamps:
0:00 Introduction
01:28 Why fly a 7” drone vs. 5” drone
02:43 Why you should use GPS
05:02 Moz7 Frame Overview
05:31 Moz7 Frame Highlights
06:45 Moz7 vs Chimera 7
08:18 Moz7 drone Review
09:16 EMax EcoII 2807 1300KV motors
10:53 Props: HQProp 7.5X3.7X3
14:13 GPS install
14:30 Vifly GPS Mate
16:07 Moz7 Build weight & overview
17:20 Batteries & flight times
18:07 Dual batteries with parallel adapter
20:16 Why you should use GPS
21:32 GPS in Betaflight setup
24:11 GPS Telemetry logging setup
25:37 Conclusions: pros & cons of GEPRC Moz7
* Oscar Liang's tutorial on logging GPS telemetry: oscarliang.com/log-telemetry/
* How to display GPS coordinates on Tango II: • Display GPS Telemetry ...
My favorite FPV Gear:
Radiomaster Boxer👉 bit.ly/RMBoxer
Goggles Integra 👉 bit.ly/IntegraGoggles
Goggles 2 👉 bit.ly/DJIG2
Google V2 (renewed:) 👉 amzn.to/3L6j7GF
Best foam for V2 Goggles 👉 bit.ly/V2Foam
DJI O3 AIr Unit 👉 amzn.to/3RaJMpb
Foam landing feet: 👉 amzn.to/44vOjVX
GepRC Nd filters for DJI O3: 👉 bit.ly/gepnd
GEPRC Cinelog V2 O3 👉 bit.ly/CL35V2
GEPRC BabyCroc 5 👉 bit.ly/Croc5
GEPRC Croc75 V3 O3 👉 bit.ly/Croc75V3
GEPRC Croc75 V3 Frame 👉 bit.ly/C75V3F
GEPRC MK57 LR O3 👉 bit.ly/MK5D7
GEPRC MK57 LR Frame 👉 bit.ly/MK5D7F
Diatone Roma L5: 👉 bit.ly/DiatoneL5
Diatone F6 👉 bit.ly/F6BNF
My favorite FPV stores:
BetaFPV 👉 bit.ly/BFPVStore
GetFPV 👉 bit.ly/GTFPV
GEPRC 👉 geprc.com/?ref=colibri *code "fpv5" for 5% off!
Diatone 👉 bit.ly/Diatonehome
* Some of these links may be affiliate links which support the channel. Thanks for your support!
#geprc #moz7 #emax2807 #fpv #fpvdrone #cinematicfpv #longrangefpv #m10gps - Věda a technologie
![☀ Дальнолет, которого все ждали. Мощь, тяга, скорость. [GepRC Moz7]](http://i.ytimg.com/vi/WZIQRYbxzpQ/mqdefault.jpg)
![☀ Дальнолет, которого все ждали. Мощь, тяга, скорость. [GepRC Moz7]](/img/tr.png)
GepRC Moz7 👉 bit.ly/GEPMoz7
GepRC Croc7 👉 bit.ly/Croc75V3
Emax 2807 Motors 👉 bit.ly/Emax2807
8000mah battery 🤯 bit.ly/8000mah
**Save 5% at GEPRC with code "fpv5"
Yes! Please make a separate video about GPS logging into the radio!
Im interested in this subjekt too, so dont hesitate and publish a Video about this theme
Thanks a lot for watching! I did cover the gist at 24:11, but the video just got too long to to a proper tutorial. I will try to do that soon, but in the meantime, here is Oscar Liang's excellent blog post on how to set up telemetry logging in your radio, i.e., saving GPS coordinates on to an SD card. oscarliang.com/log-telemetry/ I also recommend displaying GPS coordinates on a screen in your radio, that way you have it available immediately when you are on top of a mountain with no computer!
Thanks for the pro tip! I enabled telemetry before but haven't fail tested it to check if I am getting the proper coordinates from my Chimera
I would highly recommend logging GPS telemetry data to your SD card, and ideally displaying it on a screen in your radio... I learned that lesson the hard way when my quad went down... I only had GPS in my OSD but the quad had drifted a ways from the moment I lost video so I never did find it : ( Like I mentioned in the video, now I literally do lost drone drills... I just grap the GPS from my radio and type it into Google Maps to make sure all is good, because if I ever do need them, I will probably be far from a computer and in a bad way! @@lomtikster
Another good video would be about installing GPS units on other pre-built drones that dont have these out of the box like Cinebot etc. I carry Cinebot as a backup drone but hesitant to send it out further or over the water. There are not many easy instructional videos out there, like which 3D printed GPS holder options exist that you can adapt, etc.
Great idea, I also like to have GPS units on just about all my quads. They are cheap and easy to setup so why not??? If you failsafe over water that would be the difference between an easy recovery or losing your drone. GPS installation on the cinebot is very easy, you just need a spare UART and 5v pad on your FC and then set it up in Betaflight. I recommend the GEPRC M10 GPS units, they work great and are not too expensive bit.ly/GEPM10 The iFlight GPS units are also great but they are much more $$.
2 weeks ago i got mine Moz7 (pre build crsf), it flys realy fine.
Awesome, I'm really enjoying mine too! What batteries are you using? I'm using my 5" batteries connected in parallel to give me lipos between 3,000-3,600 mah and li-ion between 3,000-5,000 mah but I really want to get GEPRC's 8,000 li-ion pack!
@@colibrifpv i use the big gprc lipos 6500mah and Gens 5400mah lipo,
Also for longer range and call flights i got an 8000mah liion from geprc
Excellent simplicity 👌 on this product.
Thanks a lot for watching, really appreciate your support 👍
Beautiful quad
Thanks a lot. appreciate it 👍
Wow man wot a very well put togthere vid bro helped me alot man ❤❤❤❤❤
I'm really glad it helped, thanks very much for watching!
great video :) m10 gps? PID Loop at 4k?
Hey Filipe, thanks for watching! Yes I'm running the M10 GPS and sop far so good - it gets sats super quick and I have had no problems. I'm running PID loop at 8khz and so far so good!
Great Video! My Moz7 is back ordered but on the way! Say, where did ya procure the LEDs and clear shrink tube? Thanks!
Hey, thanks for watching! I got a pack of clear heat shrink on Amazon, super useful for receivers and whatnot (amzn.to/48LZHQ3) and the racewire came from RaceDay Quads. It became necessary because the leads on my Emax EcoII Motors were too short for the rear arms...
Thank You Sir!
Your'e welcome, thanks a lot for watching, really glad to have you here!
The o3 air unit only uses 1 antenna, but this kit uses two. Where does the other antenna hook up too? If you pointed this out in the video, sorry i didnt see it. I ordered this frame and cant wait to build it! Im also going to be using a mamba stack, and i already have the same emax motors that you are using, but i decided to go with the fpvcycle 2809 1300kv, since they almost weigh the same!! I dont know how they did it. Going to be using a gopro 10 bones, and 7 inch props. I ordered the gemfan 7035 carbon nylon props that are favorited right now or was. Hope they work ok as a 7.5. Also going to be using 3300mah 6s HRB lipos. Thank you for this very informative and excellent video! Subbed.
Oh dang i just realized the o3 factory antenna uses 2 ipex connectors! Woops! Thanks anyway!!
Ok another question, are the included antenna ipex connectors, are the rp-sma, or sma?
Glad you figured that out! I Your build sounds amazing, those fpv cycle motors are a great choice for a 7.5". I haven't tried those props but I've heard they're very good... they are a tad expensive, right? Be curious to know if they are. worth it. What receiver are you using? Good luck with your build, take it slow and enjoy the process! @@serenityfpv
Yeah those props were kinda expensive, hope they are worth the $. Im using crossfire, always and forever!@@colibrifpv
Great video with detailed content. I wonder how long it might be before manufacturers incorporate air ducts in/out on side panels 😮
Hey Gregory, thanks for watching! Side panels are a pretty new thing, most drones have not had them so those hot electronics are free to breathe. With the trend towards side panels to make drones look cleaner (and more durable), air ducts are definitely required to allow those hot VTX's to breathe!
Great video, thank you. Did you apply GepRc CLI to this quad or is it flying well on stock BF?
I'm actually using a 7"!preset by UAVtech on Betaflight 4.4 and it's flying great!
@@colibrifpv thank you. I have used UAVTech presets in the past and it worked really good
I've also had great luck with them, he obviously knows what he's doing. Happy flying! @@jacekkaczmarczyk_drones
Great video. Do you have a preset for the tune that you used in Beta Flight?
Hey Brad! I used one of he. presets for 7" drones, I think it was the UAV preset, and it works great!
Thank You for the content. If the antennas that Geprc provides on the bnf limits your range because of wrong polarization, did you change your antennas? If so,what did you choose?
Aloha
Hey Chris, Aloha from the Ecuadorian Andes! I have a Lumenier "AXII Duality" antenna on the way, they were on backorder for forever but now are in stock, here's a link if you want to check them out bit.ly/LumO3 If you want to try one, grab it quick, GetFPV told me they are likely to be out of stock again soon. To clarify, the stock antennas do give you some very impressive range with the O3 system, it's not like it's unflyable or anything, it just isn't as good as it COULD be with antennas made specifically for the O3....Also, if you are using older goggles (V1 or V2) then just stick to the stock antennas, but these should give you better range with Goggles Integra or Goggles 2. If you do try them, let me know how it goes. I will be testing them myself, but they won't get to me here in Ecuador for another few weeks....
Did you check if the antennas are better than the stock antennas ? I’m building a build but I am confused if i should the flyfish rc antenna or the one you said or the stock lhcp antennas
How much space is there on the battery pad? Is there enough space to mount two 4000mah batteries in parallel (6 inches length combined)?
Hi, what kind of glasses do you use
I get 40min with my geprc 7" Mk2, 2506/1250kv Samsung 6S Li-Ion pack, low pitch biblades in carbon, but as soon I strap on 3 blade props it drains. Freestyle ofc 😂
I'm building an old Mr Steele Alien, a Armattan Chameleon 5", Stinger's V2 lowrider 5", an Acrobat 4" with the original Lumenier 1405/14000kv (I think they are), motors from the very first mini quad, a long range Roma L4. Runcam split on the Acrobat and haven't decided on the HD can fir the KR 4". Aso building the GEPRC 7" long range and my TBS Discovery Pro 15" with gimbal and will put a PixHawk in the 15", maybe the 7", but I have a Foxeer F7 fie it. Have two Z84 and a TBS Caiprinha delta wing. My longest flight with the 840mm Z84 is 79.42km before I had ti go back. Looking forward to flying again
Wow, that sounds like an amazing fleet! The New GEPRC 2.4g Maten VTX caught my eye, even though I haven't flown analog in years, it may be fun to play with. I also noticed their Mark4 7" and 8" analog long-range drones are super cheap, like $240 and $260, at those prices I'm tempted to play with analog again!
It would be great if you do video for GPS rescue !
Thanks for your feedback, I'll try to do a video on GPS rescue because it is super important! It has saved me from losing my drone countless times...
i broke the tpu gps mount on my moz7 and they dont sell them separately not sure what to do. also the gep rc 6000mah packs are great
You broke the TPU mount? I thought those things were indestructible! There is a free print on thingiverse, if you don't have a 3d printer I know Race Day Quads or other services will print it up for you. to know those big 6000 mah packs are worth it! Moz7 GOPro Mount: www.thingiverse.com/thing:6277215
@@colibrifpv yeah it was a cold flight so the tpu broke clean off and it was the gps mount not the GoPro mount still haven’t recovered the gps. But thank you I will look into that I appreciate the help
@@beantron Sorry I read that wrong, the GPS mount, that makes more sense, there is a ton of flex in mine. Don't see one on thingiverse and assuming your still using the Antenna mount TPU, it's pretty specific to this frame, i.e., would be hard to make a generic one fit. Try contacting GEPRC support, maybe they would sell you that piece or share the .stl file. They do sell replacement parts for most of their frames.
@@colibrifpv that’s exactly what I did I’m hoping they can if not looks like I’ll have to buy a whole frame or Jerry rig something
I really like to know what is the longest distance you have made with this drone. I’m looking for solid vtx reception.
Hey, I haven't gone out farther than 2.5 km with this drone because that's my line of site limit (I have two friends located at strategic places as spotters) but this VTX will definitely go much farther, if you have better antennas and a better module in your goggles.
Lat 2.7!! , blows my mind. I live at Lat 58.9 above you.
ha ha, crazy eh? 😁
If you could only have one of these, which would be the best option?
Moz 7 vs Crocodile7 vs Chimera 7 bind n fly with 03 & crossfire for coastal cruising?
That's a tough decision because they are all great, but I would go Croc7 BNF. It is a tad lighter and more efficient than the Moz7 and has slightly smaller motors but will still have loads of power and longer flight times. The Chimera is also a solid choice, but my opinion is that GepRC's electronics are higher quality and have a lower failure rate.
just built a speedybee 5 with inav rather than betaflight, this 7" ok with inav.
Hey there Steve, that's awesome you took the dive into iNav, this Moz7 would be a perfect candidate for iNav, I haven't set it up yet but I am seriously tempted. How does your SpeedyBee5 fly on iNav?
Wonder how will the Eco II motors 1300kv would be on 4s 2,200 mah Batteries 7inch light build with naked gopro or session 5?
I think those motors would do great but you would probably want to go a tad higher in KV for 4s (these also come in 1500kv and 1700kv). I suppose 1300kv would work on 4s, especially if you could manage 7.5" props, and if your build is super lightweight, but I would still go 1500kv. Remember, you can also step down in KV with a motor output limit in Betaflight, but you can't go up in kv!
The Mark4 7 inch is still only $250. Can't beat that with a stick. I just can't send $1000 flying off into the wild blue yonder.
I hear you, and wow, that's an insane value for a 7". Those motors alone cost half that, assuming they are unbranded versions of the SPEEDX2 2806.5's. I also LOVE the MK4 frame.. sexy curves and lots of space to build with. I think you found a gem right there...
Funny enough I just had my iFlight chimera 7 pro decide to F off into oblivion. Pretty sure I’ll
Never see it again. But I will for sure buy another 7 in quad!
If you fly analog, or if you want to DIY a digital vtx and save some $$$, the Mark4 7" and 8" are super cheap on GepRC right now...
7inch 👉 bit.ly/MK47
8 inch 👉 bit.ly/MK48@@hateforall4012
really great video. But there is a small error in it. When you indicate that a 15cm replacement O3 coaxial cable should be enough, this is incorrect. The standard O3 coaxial cable listed as 115mm in the DJI specs is actually what they sell as a 15cm cable when measured stretched tip-to-tip. So you need to get either the 17cm or the 20cm replacement cable. I found out the hard way, when I ordered a replacement 15cm cable.
Hi, thanks a lot for point that out, I'm really sorry if I got that wrong and it caused you to buy the wrong cable! I didn't know that the length includes the connectors.... hopefully that 15cm (or 115mm) cable will be useful in another build? I had bought a pair of the 20cm cables to have on hand (I live in South America and shipping takes a month) and there is plenty of extra so I assumed the shorter one would fit. Nothing worse than sitting down to build and finding out your components aren't compatible. Hope your build is going well, aside from that!
@@colibrifpvI received a 20cm and a 17cm coaxial O3 cable. The 17cm cable is just perfect for the Mox7. Just a bit of slack, but no redundancy.
@@bdmdphd I got a 17cm as well and it`s too short. It is just a touch longer than the original DJI. Seems it depends from where you buy it. So I recommend to go for the 20cm directly.
@@SerialKoE my 17cm worked great and was 2cm longer than the DJI cable. Must vary depending on the vendor. Good to know.
Is there enough room in the back for the original air unit?
Yes, there definitely is. You could easily install the original air unit with double-sided tape and zip ties. However, you would have to remove the side plates because the original Air Unit is wider than the O3, so you have to decided how important those are to you. They do look very cool, any maybe they do keep your electronics cleaner, but from a performance perspective the drone will fly without that weight and they are not necessary at all.
Did you screw down the air unit or two sided tape?
Actually neither, the Moz7 frame actually comes with a custom aluminum mount that acts as a heatsink. It's a super premium frame and that's one of the details that justifies that $$$ 😁
@@colibrifpv yes I was asking if you taped or bolted the air unit to the heat sink. I just went ahead and bolted mine
were did u get the antenna wire's at????
I'm pretty sure they came with the frame, but any FPV store sells them also 👍
Wich FC stack are u using for this build?
Hey! I'm using a Diatone F7 4th gen stack with a 65a ESC. I love my Diatone stacks and I have had great luck with them, highly recommended! If you want to save a few bucks, GEPRC has a new line of "Taker" stacks which are very affordable, and now fully supported in Betaflight 👍
Did u connect the gps to the gps mate??
Yes I did! Honestly, gps mate isn't so necessary with m10 gps because they get sats so quickly, but the integrated battery powered buzzer is nice to have too. Cool little gadget!
What FC/ESC did you run with this setup
Hey 👋 I used a Diatone Mamba MK4 with a 65a ESC
@@colibrifpv thanks! I guess that Emax does take a lot of amps
Those motors are actually pretty efficient, especially the way I fly, nice and gentle for long flights with li-ion batteries, and a 50-55a would be plenty, but I has the 65a ESC around from last year's Black Friday from RDQ, so I used it! @@houdhoud313
I dont wanna be harsh,so at first thanks for the video which is very well made and at least included some information… but all in all quite generic and only pr material.. designed like a starship ? Rly ? It looks like every other 7 inch 😂 we will get some amazing flight times with the right battery ? Rly 😂😂😂 how amazing with what battery tested how many times ? 7 inch built to fly further but not one range test or info ?
I dont expect you to have a lab and measure reception or consumption but like this its just another commercial for gep, at least some info regarding antenna mount and problems and building problems… although i heard so far that having much space is one big advantage of the moz7.
I am searching for a 7inch with 20min flight time plus and perfect receptiom 7km plus… any feedback is highly appreciated 😊
Hey, no worries, I'm happy to have the feedback...
re: Starship, yeah, I was being sarcastic 😁 Yes, it's a bunch of marketing BS, but it hardly looks like other 7" frames... GepRC is competing with the Chimera7, which also looks pretty badass. Did you see at 6:45 I compared the Moz7 with the Chimera 7, and mentioned you can leave out 60g worth of unnecessary parts like the feet and side-plates?
You are right about the range tests... but I did include range/flight time tests in a later review on li-ion batteries: czcams.com/video/qdu24dkpwbQ/video.html
I also upgraded the stock antennas with Lumenier Dualitiy antennas, which are much better, but I haven't had a chance to finish editing that one.
This is not the best frame for maximum range or flight times unless you strip it down - it's just too heavy.
If you want maximum flight times or range, consider the Foxeer Aura frame, or the new Johnny FPV 7" bit.ly/QAVFPV7, or if you are on a budget, the SourceOne 7".
As for perfect reception, get yourself some Crossfire or ELRS and a DJI O3 and I highly recommend upgrading to the Lumenier Duality antennas... bit.ly/LumO3. They DO make a difference, and I will have a video up whenever I get the chance to finish editing it...
This is a 30 minute video with loads of honest criticism, build tips, tips on setting up GPS, etc. I did receive the frame free (which I said) but I paid for over 80% of the build).
Thanks for watching, I really do appreciate the feedback...
@@colibrifpv thanks mate, you just earned yourself a sub 🙂
if i choose to use the v2 goggles will i need to plug in my phone
No, that is something that DJI did with the Avata drone, FPC drones like this one will work without plugging in to your phone.
if i were to use 2 6s 1300 mah batterys making it a 2600 mah battery then it should be ok to use
Yes, a 2600 6s would be a great match for a 7" long-range drone! YOu might also want to consider some of GEPRC's huge li-ion packs, they are a bit expensive but you will get much linger flight times!
long range ...... hom many km ?
With the right batteries you can fly this drone out several km without any problems. I changed the antenas to Lumenier diversity and I can easily get out 3km, I have no need to go further than that but the drone definitely could go further. Over a certain distance and you'll want a lighter drone for better efficiency I think.
couldn't you just put an air tag on it
No, not really. Seems like you could though, right? Problem is airtags use the network of iphones that are present in any given area to communicate their location, at least as far as I understand that tech. Any place you would be flying and crashing this drone wouldn't have all those bluetooth connections available, unless you lost your drone in a mall...
stealth ? these motors are screaming when I fly over 40km/h
Right, a quad this heavy is always going to make a good amount of noise, I just meant the LED's attract even more attention, which some people may not want.
@@colibrifpv but it is still less noisy than a 5 inch right?
Yes, in general larger props are less noisy, with a deeper pitch, than smaller ones, but it does depend alot on the weight and how you fly. With a massive battery, this thing does make some noise! @@Spacecazeka