This is great advice for these saws. I enjoy all of the content you come up with. Would be neat to learn more about the mill and why they grade logs the way they do. Thanks for taking the time to share this with us.
I’m glad you like the channel. I’ve been thinking of talking a bit about logs and grades. But it’s a complex subject and I need to figure out the proper approach to a video like that.
Great Content, But You Missed one Screw that vibrates Loose, on the Air Injection Shroud from Fly Wheel To Carb, that screw come loose and jambs up your fly Wheel, Mine stripped the thread out I had to use a longer screw, more thread in the screw hole, 25mm long screw required.
Thanks for taking the time to show this was not aware of these issues make complete sence though I have 2 395 and they sit more then run but when i get them on the Alaskan mill I will go threw this first thanks again
Thanks for sharing. Good thing to know. If I ever buy a 395 I'll know to do that. Always in the timber if not droppin and toppin its got to be looked for and purchased. I think alot of what you mentioned would make good content. Go for it.
Sigh made the leap to the Prius aka 592xpg my 5 year old and I went nose to tail on it this morning with the blue lock tight. Set it up 8 pin with the titanium Husqvarna 28 inch. I have not sourced the I like sushi bar you recommend. I walked by all my 300 series saws like I was walking in with a mistress. Thank you for the channel and effort. You are appreciated.
I have a 390xp and you have got me a bit worried. Will be checking all the bolts out asap. Thanks for the heads up! As far as content goes...I am interested in all aspects of your operation. Keep up the great work!
Great video on how to improve longevity of a saw. Does the lock-tite application affect the warranty? I think it would be great to learn more about your business processes. How do you determine what you will bid for the timber? What are the things to look out for to ensure you're getting good value for your bids (don't overpay, can readily move your logs, how to cost the log removals, etc.) I'm a retired petroleum engineer and know that successful small business owners know a lot more about economics than some of us more specialized technical people might give them credit for (I know that successful small business owners end up with are a lot more wealth than us engineers that spent the better part of a decade in uni getting advanced degrees and working for major oil companies end up with, for example).
I don’t generally worry about warranties. As far as this business I can touch on generalizations but specifics I would have to keep to myself do to competition.
He does great work, had him do my 550mk2 and 572. Interesting to see the numbers, did you by chance talk to him before doing the work? Interested to see if you had him port for torque gain or just didn't specify..
@@JoshNoss I had a brief conversation with him prior to shipping it. That saw is used strictly for bucking big boiler logs in X climate, with a 36" bar. I have him as specific details as I could, left the rest up to him. He was great to communicate with and I'm impressed with the performance gain. You know you've got ahold of something when you hit the throttle.
@@tyharland1906 I bet! Those 395s gain really well and can truly put out the torque if that's what they're ported for. He's gonna be getting my 592 in January and I'm thinking to have him shoot for more RPM and HP and not so much torque gain as I'll probably only run a 24" bar and 9-10 pin 3/8" sprocket.
I wish I had found out the husky 394 ,395 years ago when they were brand new at the chainsaw dealers alot other people used other chainsaws and I didn't remember seeing around here or anybody using them just like the other chainsaws 😊😊 I heard about them I didn't get 2 see and they had 2 cut all of trees W a chainsaw be 4 tree cutters were made there was 1 logging crew close by the other worked else and the rest of the people worked at sawmills years ago I don't what kind of chainsaws they used that has been over 40 years ago 😊😊 OMG 9.16 2O23
I put an aluminum Bradford built bed on my Super duty and I'll never not have an aluminum flatbed on my truck again. It just makes life so much easier as the whole bed is a giant work table that you can access from 3 sides not just the tailgate. I got the skirted bed with the built in storage lockers, they are great for ratchet strap and small stuff.
I got a 394 a couple months back that didn't run. Just got it running and started the break-in. Vibrated the muffler nuts and bracket bolts right out of the front. I'll be putting loctite on it soon 😅
@Good.Fellers Given how pricey OEM parts are, I probably lost $37 in 2 bolts and 1 nut in the mud. Ha! Still working out the tuning, but anxious to get it dialed in.
Ah, this is one of the reasons I picked up a 390 instead. I also bought a 592 recently, which is awesome, but I'm not convinced its better than the 395. What do you think? Would the 395 have been a better option?
@@Good.Fellers same. I had maybe 3 hours on it and one of the bar posts fell into the oil reservoir… I think it was mis-seated from the factory. I got it pressed in correctly, and haven’t had a problem since. One thing, the 592 is a mean, aggressive saw. I had a 36 inch bar buried in red oak and I was still bouncing off the rev limiter. I had to dog in and pull a little to get the RPMs down. Guess the next year or two will tell if it holds up as well as my 390 has. The 390 is more sluggish than the 592 but it’s a rockstar. Always starts. Always runs. Never fails.
7.3 It’s been a good truck so far. Use to get deisels but there not worth the money for what do with them. My last truck was a 2012 f350 with 6.2 and it was probly my favorite truck of all time. It was whooped and time for a new one.
Thank you! I just bought a 395. Your knowledge and experience just helped a lot of us out. One quick question, my 395 is a leaker. I've run Stihls before this. Is it common for Husqvarna saws to leak bar oil? Any tips or ideas?
Thanks for the quick reply! I'll have to take a closer look. It literally showed up yesterday on UPS. 36 inch Husky bar. I saw it was slinging a lot of oil and the oiler adjustment didn't do much.
@festus1978 they do leave a wet mark on the floor often. I run my oilers all the way up. If there’s oil flinging off the chain then I would call it normal.
for loc tight to work correctly u have to clean the screws or bolts with some thing like brake clean oil or grease or crud makes it not so affective sorry for negative but we learn together
I’m not sure how to respond to this. I think in this case cleaning the bolts aid negligible based on what I saw when I removed them. At the same time I think your not wrong. I hope you enjoy the channel and I appreciate all comments.
I had heard that about the 395. It's odd because my 390 runs as smooth as silk but not the same power as 395. The 592 is smoother yet and has crazy power. I haven't found anything that will slow it down yet.
592 is the king when it comes to stock power, but ported? The 395 wins.. I just wish the 592 wasn't running a 12k limited coil, if it had a 13.5k coil you could get a LOT more power from them
@@JoshNossdo you ever watch Dyno Joe's channel? Every saw I've ever seen him put on the dyno starts falling on its face after about 9, 500-10K RPMs. Max hp is almost always around 9K - 9300K
@@Mr_Clean Funny you should say that because Dyno Joe has now built 3 saws for me over the years, Just look at some of the more "race" saw builds he's done and you'll see the peak is up a few thousand rpm more. It was *his* opinion in fact that had me make this comment, that unlimited coil would allow you to get a lot more power from the 592xp and most 395s that really make the 12+hp numbers are the unlimited coil ones
@@Mr_Clean you have to realize too that his dyno isn't like a car dyno, his goes from high rpm and then gets pulled down to stall speed like would take place in a cut. So if you're starting from 14,000-15,000 instead of 12,000 you'll see that peak move up considerably.
Fair enough, agreed. And yes, we want to see more of what a woodman has to do as the bigger job with all the machinery. Nice wood pile. That takes equipment!!
At the time of the purchase of that bar it was the best bar I could buy for the money. I do a lot of cost analysis and those bars are better then oregons “husqvarna” but no where near a Sugi or tsumara. I have since then ordered a gross of tsumaras. But at the time I bought the stihl bars the tsumaras where not available.
O Machado e a Motosserra Eli Silva & Zé Goiano Composição: Moacir dos Santos / Zé Goiano O machado e a motosserra tiveram uma discussão Motosserra diz que é orgulho da evolução Machado pra mim já era pois vem do tempo de adão Você agora só serve pra fazer calo na mão Motosserra dá um ronco relou o dente no tronco já se vê o pau no chão A serra chamou o machado pra fazer uma porfia Machado aceitou na hora e quando chegou o dia Entraram junto no mato pra mostrar a serventia A motosserra roncava machado velho tinia E naquele matagal foi só cavaco de pau pó de serra que subia E esse grande duelo deste jeito é que termina Na briga das ferramentas o machado é que domina Motosserra parou cedo ali no tronco da quina Machado seguiu cortando mata grossa e mata fina Motosserra impotente rebentou sua corrente acabou a gasolina Que isto sirva de exemplo para toda humanidade E você que é tão jovem tem que saber a verdade Respeite bem os mais velhos não brinque com sua idade Uma pessoa idosa também tem utilidade É um diamante valioso se não tivesse o idoso não teria mocidade
Thanks for sharing this huge tip, just bought a new 395 🙂
Sweet, enjoy that beast!
This is great advice for these saws. I enjoy all of the content you come up with. Would be neat to learn more about the mill and why they grade logs the way they do. Thanks for taking the time to share this with us.
I’m glad you like the channel. I’ve been thinking of talking a bit about logs and grades. But it’s a complex subject and I need to figure out the proper approach to a video like that.
Great Content, But You Missed one Screw that vibrates Loose, on the Air Injection Shroud from Fly Wheel To Carb, that screw come loose and jambs up your fly Wheel, Mine stripped the thread out I had to use a longer screw, more thread in the screw hole, 25mm long screw required.
@fredscheerle7592 I’ll look into it.
Great video. Gotta love all the loose screws right next to the “quality control” inspection stickers from the factory lol
Yeah, lol
Great advice again, thank you.
Glad you enjoyed it.
Great tips on 395xp 👍
Liked this video very detailed
Glad you enjoyed it
Thanks for taking the time to show this was not aware of these issues make complete sence though I have 2 395 and they sit more then run but when i get them on the Alaskan mill I will go threw this first thanks again
Absolutely!
Love this “how to” video! Very informative!
Thank you!
Thanks for sharing. Good thing to know. If I ever buy a 395 I'll know to do that. Always in the timber if not droppin and toppin its got to be looked for and purchased. I think alot of what you mentioned would make good content. Go for it.
Awesome thanks for the input.
Same as everyone else has said. Show us everything. Your audience loves all things forestry so let’s see it all from your perspective
Awesome thank you for the input.
i just bought a 395 and wow the vibration on the 395 to the 372 huge lol
I never noticed
Sigh made the leap to the Prius aka 592xpg my 5 year old and I went nose to tail on it this morning with the blue lock tight. Set it up 8 pin with the titanium Husqvarna 28 inch. I have not sourced the I like sushi bar you recommend. I walked by all my 300 series saws like I was walking in with a mistress. Thank you for the channel and effort. You are appreciated.
Dude, this comment is awesome. I’m glad your enjoying the channel. Be safe out there.
I have a 390xp and you have got me a bit worried. Will be checking all the bolts out asap. Thanks for the heads up!
As far as content goes...I am interested in all aspects of your operation. Keep up the great work!
Hey thank you!
Good job. I've seen these problems, especially with the exhaust bolts. Good advice
Glad you liked it.
Found the vid thanks again🤙🏻
Awesome!!!
Thanks for the tutorial. Set mine up like that! Again thanks for the insight!
Absolutely!
My 395xp runs great…tightening the screws have been a preventive maintenance.. all saws must go thru this just for PM…. Good demo
Thank you!
sooo gooooood job friend!!!....thanks!!......................huski 395xp & 3120xp ONLY LOOOOOVEEE!!!!
Right on !!!
Great video!! PMS is important on all saws IMHO. Yes, all aspects are important and can be of great benefit to all. Thanks! ⛓🪚👍👏🇺🇸 Rick
Awesome good to here from Rick!
I love all things about Forestry. Make all different kinds of videos.
Awesome, thank you for the input.
Would love to see some content on 395xp maintenance. Great video btw.
Good to know
Wish I'd saw this 2 years back
Lol
Love to see the skidded vid!
Right on Stacker.
Great stuff!
Hey thanks!
Great video on how to improve longevity of a saw.
Does the lock-tite application affect the warranty?
I think it would be great to learn more about your business processes. How do you determine what you will bid for the timber? What are the things to look out for to ensure you're getting good value for your bids (don't overpay, can readily move your logs, how to cost the log removals, etc.) I'm a retired petroleum engineer and know that successful small business owners know a lot more about economics than some of us more specialized technical people might give them credit for (I know that successful small business owners end up with are a lot more wealth than us engineers that spent the better part of a decade in uni getting advanced degrees and working for major oil companies end up with, for example).
I don’t generally worry about warranties. As far as this business I can touch on generalizations but specifics I would have to keep to myself do to competition.
Nice recommendations👌
Thanks bud!
Awesome "how to" video seeing the axle dropped out of the skidder would be cool but I think everything you listed would make cool videos
Awesome
I’ve lost so many case bolts. Good tip
Thanks
I just had dyno joe port my 395, I think it makes 9.6hp now. Absolute buckin' animal.
That’s awesome!
I bet its a monster❤❤💪💪
He does great work, had him do my 550mk2 and 572. Interesting to see the numbers, did you by chance talk to him before doing the work? Interested to see if you had him port for torque gain or just didn't specify..
@@JoshNoss I had a brief conversation with him prior to shipping it. That saw is used strictly for bucking big boiler logs in X climate, with a 36" bar. I have him as specific details as I could, left the rest up to him. He was great to communicate with and I'm impressed with the performance gain. You know you've got ahold of something when you hit the throttle.
@@tyharland1906 I bet! Those 395s gain really well and can truly put out the torque if that's what they're ported for.
He's gonna be getting my 592 in January and I'm thinking to have him shoot for more RPM and HP and not so much torque gain as I'll probably only run a 24" bar and 9-10 pin 3/8" sprocket.
I wish I had found out the husky 394 ,395 years ago when they were brand new at the chainsaw dealers alot other people used other chainsaws and I didn't remember seeing around here or anybody using them just like the other chainsaws 😊😊 I heard about them I didn't get 2 see and they had 2 cut all of trees W a chainsaw be 4 tree cutters were made there was 1 logging crew close by the other worked else and the rest of the people worked at sawmills years ago I don't what kind of chainsaws they used that has been over 40 years ago 😊😊 OMG 9.16 2O23
Right on bud!
Must be your Goin to Town Rig - never seen the box of a faller's truck so clean... 😉😉
No need to wreck the truck
I pull a trailer
I put an aluminum Bradford built bed on my Super duty and I'll never not have an aluminum flatbed on my truck again. It just makes life so much easier as the whole bed is a giant work table that you can access from 3 sides not just the tailgate. I got the skirted bed with the built in storage lockers, they are great for ratchet strap and small stuff.
@4schitzangiggles my last 350 had a flatbed all set for logging. But I try to light now a days.
I just wanted a look at the new saw. Wanted to see the sprocket and oil pump adjustment.
I run a seven pin sprocket, with oil pump maxed out.
Got a half tank through mine already. Hope it's not too late.🤞
It’s gonna be ok.lll
Ive ran into this a few times an then some on my 395xp. My 371 an 390xp no problem with em vibrating bolts out.
Yes it’s very common.
I got a 394 a couple months back that didn't run. Just got it running and started the break-in. Vibrated the muffler nuts and bracket bolts right out of the front. I'll be putting loctite on it soon 😅
That’s awesome on the new saw! They vibrate apart but they run like a mother!
@Good.Fellers Given how pricey OEM parts are, I probably lost $37 in 2 bolts and 1 nut in the mud. Ha! Still working out the tuning, but anxious to get it dialed in.
@SouthPawEd Right on, lock tight that bad boy and enjoy. I have had a few custom built 394s back in the day that were amazing saws.
I love a 394.
Ah, this is one of the reasons I picked up a 390 instead. I also bought a 592 recently, which is awesome, but I'm not convinced its better than the 395. What do you think? Would the 395 have been a better option?
Hard to say I’m a big fan of the 592 but I haven’t put enough hours on her to say.
@@Good.Fellers same. I had maybe 3 hours on it and one of the bar posts fell into the oil reservoir… I think it was mis-seated from the factory. I got it pressed in correctly, and haven’t had a problem since.
One thing, the 592 is a mean, aggressive saw. I had a 36 inch bar buried in red oak and I was still bouncing off the rev limiter. I had to dog in and pull a little to get the RPMs down. Guess the next year or two will tell if it holds up as well as my 390 has. The 390 is more sluggish than the 592 but it’s a rockstar. Always starts. Always runs. Never fails.
Oh jeeze, there good saws just needs maintenance.
Nice truck! 6.8 or 7.3?
7.3
It’s been a good truck so far.
Use to get deisels but there not worth the money for what do with them.
My last truck was a 2012 f350 with 6.2 and it was probly my favorite truck of all time. It was whooped and time for a new one.
Thank you! I just bought a 395. Your knowledge and experience just helped a lot of us out. One quick question, my 395 is a leaker. I've run Stihls before this. Is it common for Husqvarna saws to leak bar oil? Any tips or ideas?
Depends on where it’s leaking and what bars you run.
Clean mating surfaces help. Run tsumara bars also.
Thanks for the quick reply! I'll have to take a closer look. It literally showed up yesterday on UPS. 36 inch Husky bar. I saw it was slinging a lot of oil and the oiler adjustment didn't do much.
@festus1978 they do leave a wet mark on the floor often.
I run my oilers all the way up. If there’s oil flinging off the chain then I would call it normal.
@Good.Fellers Thank you, sir. I'll keep an eye on it, new saw paranoia, haha.
I heard the newer 395s made in Brazil had a problem for a while with oil leaking by the rivets into the oil reservoir
for loc tight to work correctly u have to clean the screws or bolts with some thing like brake clean oil or grease or crud makes it not so affective sorry for negative but we learn together
I’m not sure how to respond to this. I think in this case cleaning the bolts aid negligible based on what I saw when I removed them. At the same time I think your not wrong.
I hope you enjoy the channel and I appreciate all comments.
I had heard that about the 395. It's odd because my 390 runs as smooth as silk but not the same power as 395. The 592 is smoother yet and has crazy power. I haven't found anything that will slow it down yet.
Right on I’m not a 390 guy but I’m a 592 fan for sure.
592 is the king when it comes to stock power, but ported? The 395 wins.. I just wish the 592 wasn't running a 12k limited coil, if it had a 13.5k coil you could get a LOT more power from them
@@JoshNossdo you ever watch Dyno Joe's channel? Every saw I've ever seen him put on the dyno starts falling on its face after about 9, 500-10K RPMs. Max hp is almost always around 9K - 9300K
@@Mr_Clean Funny you should say that because Dyno Joe has now built 3 saws for me over the years, Just look at some of the more "race" saw builds he's done and you'll see the peak is up a few thousand rpm more. It was *his* opinion in fact that had me make this comment, that unlimited coil would allow you to get a lot more power from the 592xp and most 395s that really make the 12+hp numbers are the unlimited coil ones
@@Mr_Clean you have to realize too that his dyno isn't like a car dyno, his goes from high rpm and then gets pulled down to stall speed like would take place in a cut. So if you're starting from 14,000-15,000 instead of 12,000 you'll see that peak move up considerably.
Is the 390xp prone to the same thing?
No knowledge of 390s
Its funny seeing a Stihl bar on a Husky! I’m OK with it I suppose, but to some, that’s like putting Chevy parts on that Ford!
Well Oregon bars are soft and seem to not hold up.
Fair enough, agreed. And yes, we want to see more of what a woodman has to do as the bigger job with all the machinery. Nice wood pile. That takes equipment!!
Hey thank you
Awesome I’m glad you guys want to see more then just tree cutting.
Why the stock stihl bar
At the time of the purchase of that bar it was the best bar I could buy for the money. I do a lot of cost analysis and those bars are better then oregons “husqvarna” but no where near a Sugi or tsumara. I have since then ordered a gross of tsumaras. But at the time I bought the stihl bars the tsumaras where not available.
Walio nice name!
Thank you!
Model ,,made in sweden sau Brazilia …mulțumesc ..e vreo diferența între ele ,,,care e mai buna ,,mulțumesc
I several of each. I prefer Sweden but can’t be had anymore. I don’t see a difference in them other than the tag.
O Machado e a Motosserra
Eli Silva & Zé Goiano
Composição: Moacir dos Santos / Zé Goiano
O machado e a motosserra tiveram uma discussão
Motosserra diz que é orgulho da evolução
Machado pra mim já era pois vem do tempo de adão
Você agora só serve pra fazer calo na mão
Motosserra dá um ronco relou o dente no tronco já se vê o pau no chão
A serra chamou o machado pra fazer uma porfia
Machado aceitou na hora e quando chegou o dia
Entraram junto no mato pra mostrar a serventia
A motosserra roncava machado velho tinia
E naquele matagal foi só cavaco de pau pó de serra que subia
E esse grande duelo deste jeito é que termina
Na briga das ferramentas o machado é que domina
Motosserra parou cedo ali no tronco da quina
Machado seguiu cortando mata grossa e mata fina
Motosserra impotente rebentou sua corrente acabou a gasolina
Que isto sirva de exemplo para toda humanidade
E você que é tão jovem tem que saber a verdade
Respeite bem os mais velhos não brinque com sua idade
Uma pessoa idosa também tem utilidade
É um diamante valioso se não tivesse o idoso não teria mocidade
Sweet story!
Can we ask for a taste of all you do
Awesome I will keep the videos coming.
Kkkkjkk
0