The 6.7 Powerstroke was designed around the CP4. S&S Diesel covered this, and mentioned it that there simply isn't enough space for a CP3. You cannot fit a CP3 directly to the Powerstroke. The best solution right now is to put an additional CP3 pump to assist the CP4. The only total replacement for the CP4 on the 6.7 Powerstroke is the S&S Diesel DCR pump conversion. The diesel fuel's quality isn't the problem, it's the sulfur content. Diesel Fuels in Europe have a much higher sulfur content than ultra low-sulfur diesel fuels in the US. Sulfur acts as a lubricant in the pumps. As you mentioned, the CP4 was designed for Europe. That's why it's having trouble in the US. As for Ford, I have no idea what they've done to make the CP4 work. I've watched a couple of videos, and I think it's just has to do with better water-fuel separators and so on, and different injectors within the pump itself that directly lubricate the cam roller. I think diesel trucks will be fine as companies learn how to work with modern emissions standards. I'm excited to see how the 2023 Fords handle the DPF regeneration process and so on. Edit: www.dieselworldmag.com/diesel-technology/cp4-2-fuel-pump/ This article explains why Ford has fewer failures than the LML Duramax. High pressure fuel pumps require perfect timing in relation to when the fuel needs to be injected, i.e., opening and closing of the camshaft roller. This means fuel also needs to be given to the pump quickly. Ford uses a small electric pump to assist the CP4. Whereas, the LML Duramaxs used a mechanical pump which wasn't able to assist the CP4 sufficiently and quickly. If you have a Ford under warranty, get an S&S CP4 Disaster Prevention Kit. Once your warranty expires, get the DCR pump from S&S Diesel installed. Though with the new generation Ford obviously improved on the reliability.
The reason the Sulfur Content is so low in the #2 Diesel fuel today, is because with the new Emissions Standards being so ridiculously tightened, they started putting Catalytic Converters on Diesel trucks & cars, Well, Sulfur ruins the Catalytic Converters. So they thought, in their small world of wisdom, that lowering the Sulfur Content in Diesel was the best way to solve the problem. And here we are, now the Consumer is once again on the hook for very expensive repairs on their Diesel Vehicles. That's why it is imperative that you run a quality Lubricity additive, Sulfur & Cetene, to your Diesel Fuel. I own a 2015 Chevrolet Silverado 6.6L Duramax Diesel & I run Stanadyne Performance Fuel additive at every other fill up. I heard HotShots is a good one also. I have 208,000 miles on it, just put an Exergy MPROP on the top of the CP4 Pump, $275.00, it stops the metal filings from going past the pump. I see a new pump in my near future though, bout 250,000 is what I'm hearing. If you have a FASS lift pump & the Exergy MPROP that has a steel cage that holds the Dual 10 or 20 micron screens to the MPROP, you are looking at a longer life span of the CP4 pumps, but if the pump does fail, at least you only have to replace the CP4 & not your whole fuel system. I've seen CP3 fail also, it's a Lubricity & Cleanliness in the Diesel Fuel Problem. If we had excellent fuel Filtration & a great level of Sulfur in our Diesel Fuel, these pumps would last at least 500,000 miles.
I'm a diesel tech at a Ford dealer and I see very few CP4 failures outside of contaminated fuel. I'm convinced the filtration is better. Im also unsure of the lift pump pressure on the GM and Cummins. The low system lift pump runs the system at 70psi and that high of an inlet pressure may actually help. Just a thought.
I REALLY appreciate seeing you put this post ! I recently started reading about this entire set of problems and called my local Ford dealership and he said he's not seen anyone having issues with this. I've always added fuel additives in my diesel trucks and hopefully it will be ok.
I would rather install an S&S Disaster Prevention Kit, because Ford may deny warranty claims if anything else goes wrong with the engine. Maybe make a video on how the new pump does!
@@tim.prasad03Ford denies warranty for a ton of things. I’d rather be proactive in changing the pump vs Ford denying and being on the hook for a 10K - 15K repair.
My local Ford dealership told me the repair bill is around $18K for a complete fuel system replacement in the event the CP4 fuel pump fails, which is why I purchased an extended warranty through Ford for my 2019 F-350.
I understand why you bought the extended warranty BUT Ford will do their best to NOT warranty the failure. They will tell you that in the fine print it states INTRODUCTION OF FOREIGN CONTAMINANTS WILL NOT BE COVERED!!
Mines in the shop right now at the Ford dealership and the price is 12k ...and they won't warranty the S&S DCR fuel pump...I have had them order and install the disaster prevention kit before I take the truck back ...I'm at a total loss on a truck that just hit 89k miles....I'm pissed
S&S Diesel claims to have solved the CP4 pump issue, by creating a replacement, OE standard pump that fits in the space created by the original CP4. They argue the reason it was never changed is because the 6.7 engine was built around this small Bosch CP4 pump and changing it to a larger pump would simply not fit the space or the OE terminals to work with the existing sensors, hi pressure hoses and the like. So they created one, not a prevention kit (which they also have) but an actual pump that fits and works in the 6.7 engine configuration. I cannot confirm or deny the validity of their claim, but it’s worth watching and making your own assessment of the S&S CZcams video. czcams.com/video/hNXIH-JNg30/video.html
you mentioned that the cp4 pump was designed for European diesel. I am currently living in the Philippines and looked up what standards are being used here, since about 75% of the vehicles here are diesel. The diesel in the Philippines is manufactured to the euro4 standards. that should be just fine for use with the cp4 pump. Just for an FYI, the f150 is being sold here as a new truck with the 3.0 power stroke and in the ranger they are using the 2.2 diesel, although it is not called the power stroke. I am in the market for a new truck and I wanted to know what I would be getting into with a f150. now I know. thank you.
It was funny you never mentioned that Ram issued a factory recall on 2019-20 and replaced all cp4 to cp3 at no cost. Maybe ford doesn’t want to stand behind there cp4 failures because the customer will pay for it if they want there truck. Customer service
My 2011 6.7L engine runs a lot better and quieter with the S&S disaster prevention kit. Not sure why except maybe more fuel is available to enter with bypass kit. I think one of S&S videos explained that. I forget all the details but it does improve the torque at higher RPMs before falling off.
THEY FAIL ALL THE TIME .THERE IS NO MONEY IN FORD PUTTING BETTER PUMP IN FOR THEM ITS A MONEY MAKER FOR FORD ESPECIAL IF THE WHOLE ENGINE FAILS AT 23K PLUS
GM denied denied denied on the LML. Told the judge in a class action lawsuit the consumers used bad fuel. Oh yeah say how so GM when your owners manual states to use low sulphur fuel. They could have saved themselves millions of $$$ had they told consumers to use fuel lube additive. I'm waiting on my payout GM for what you owe me! My LML CP4 failed after a mechanic put in a Exergy FPR to catch a failure. I suspect air got into the pump. Kaboom! I suspect a Ford because of an additional pump and less chance of air getting into the fuel is why they have had fewer issues. I run a fuel lube additive in my F250. Plus I have the S & S prevention on it.
If you can't afford the new S&S pump get the disaster prevention kit and run fuel additives that increase lubrication. Hot Shot Secret and Archoil are Good.
Everything is great in a classroom setting but honestly in the real world testing the multiple variables in fuel it’s a poor design and the facts are Bosch will be replacing people’s engines or something like that after the lawsuit is over absolutely poor engineering from a logical standpoint! Life isn’t in a controlled environment water gets in diesel that’s a fact of life has been for 90 years 🤣
Mine was deleted and the cp4 still took a dump on me. And I stay on top of filter changes, additives every fill up and never let the tank get below a quarter of a tank. Word to the wise, if you can afford it, get the S&S dcr pump or bare minimum get their disaster prevention kit.
The 6.7 Powerstroke was designed around the CP4. S&S Diesel covered this, and mentioned it that there simply isn't enough space for a CP3. You cannot fit a CP3 directly to the Powerstroke. The best solution right now is to put an additional CP3 pump to assist the CP4. The only total replacement for the CP4 on the 6.7 Powerstroke is the S&S Diesel DCR pump conversion. The diesel fuel's quality isn't the problem, it's the sulfur content. Diesel Fuels in Europe have a much higher sulfur content than ultra low-sulfur diesel fuels in the US. Sulfur acts as a lubricant in the pumps. As you mentioned, the CP4 was designed for Europe. That's why it's having trouble in the US. As for Ford, I have no idea what they've done to make the CP4 work. I've watched a couple of videos, and I think it's just has to do with better water-fuel separators and so on, and different injectors within the pump itself that directly lubricate the cam roller. I think diesel trucks will be fine as companies learn how to work with modern emissions standards. I'm excited to see how the 2023 Fords handle the DPF regeneration process and so on.
Edit: www.dieselworldmag.com/diesel-technology/cp4-2-fuel-pump/
This article explains why Ford has fewer failures than the LML Duramax. High pressure fuel pumps require perfect timing in relation to when the fuel needs to be injected, i.e., opening and closing of the camshaft roller. This means fuel also needs to be given to the pump quickly. Ford uses a small electric pump to assist the CP4. Whereas, the LML Duramaxs used a mechanical pump which wasn't able to assist the CP4 sufficiently and quickly. If you have a Ford under warranty, get an S&S CP4 Disaster Prevention Kit. Once your warranty expires, get the DCR pump from S&S Diesel installed. Though with the new generation Ford obviously improved on the reliability.
The reason the Sulfur Content is so low in the #2 Diesel fuel today, is because with the new Emissions Standards being so ridiculously tightened, they started putting Catalytic Converters on Diesel trucks & cars, Well, Sulfur ruins the Catalytic Converters. So they thought, in their small world of wisdom, that lowering the Sulfur Content in Diesel was the best way to solve the problem. And here we are, now the Consumer is once again on the hook for very expensive repairs on their Diesel Vehicles. That's why it is imperative that you run a quality Lubricity additive, Sulfur & Cetene, to your Diesel Fuel. I own a 2015 Chevrolet Silverado 6.6L Duramax Diesel & I run Stanadyne Performance Fuel additive at every other fill up. I heard HotShots is a good one also. I have 208,000 miles on it, just put an Exergy MPROP on the top of the CP4 Pump, $275.00, it stops the metal filings from going past the pump. I see a new pump in my near future though, bout 250,000 is what I'm hearing. If you have a FASS lift pump & the Exergy MPROP that has a steel cage that holds the Dual 10 or 20 micron screens to the MPROP, you are looking at a longer life span of the CP4 pumps, but if the pump does fail, at least you only have to replace the CP4 & not your whole fuel system. I've seen CP3 fail also, it's a Lubricity & Cleanliness in the Diesel Fuel Problem. If we had excellent fuel Filtration & a great level of Sulfur in our Diesel Fuel, these pumps would last at least 500,000 miles.
I'm a diesel tech at a Ford dealer and I see very few CP4 failures outside of contaminated fuel. I'm convinced the filtration is better. Im also unsure of the lift pump pressure on the GM and Cummins. The low system lift pump runs the system at 70psi and that high of an inlet pressure may actually help. Just a thought.
I REALLY appreciate seeing you put this post ! I recently started reading about this entire set of problems and called my local Ford dealership and he said he's not seen anyone having issues with this. I've always added fuel additives in my diesel trucks and hopefully it will be ok.
I ordered the S&S DCR pump kit. They just started to ship out on the 15th. It’s not a cheap system, but way cheaper than a whole fuel system.
I would rather install an S&S Disaster Prevention Kit, because Ford may deny warranty claims if anything else goes wrong with the engine. Maybe make a video on how the new pump does!
@@tim.prasad03Ford denies warranty for a ton of things. I’d rather be proactive in changing the pump vs Ford denying and being on the hook for a 10K - 15K repair.
Swapped out my cp4 to the New S&S DCR pump. It's been over a year and around 10.000 miles. So far, it's been great.
The Rams from 2019 and 2020 had the CP4 recalled and replaced with a CP3. I have a 2020 2500 Cummins, and it’s had the recall done, no CP4 on that.
My local Ford dealership told me the repair bill is around $18K for a complete fuel system replacement in the event the CP4 fuel pump fails, which is why I purchased an extended warranty through Ford for my 2019 F-350.
I understand why you bought the extended warranty BUT Ford will do their best to NOT warranty the failure. They will tell you that in the fine print it states INTRODUCTION OF FOREIGN CONTAMINANTS WILL NOT BE COVERED!!
Good luck, they replaced the cp4 on my truck twice and now are blaming the fuel
Mines in the shop right now at the Ford dealership and the price is 12k ...and they won't warranty the S&S DCR fuel pump...I have had them order and install the disaster prevention kit before I take the truck back ...I'm at a total loss on a truck that just hit 89k miles....I'm pissed
@@christopheranderson1162 Would you get a Ram Power Wagon?
I just put a DCR by S&S in my 2019 6.7l so I can sleep at night.
S&S Diesel claims to have solved the CP4 pump issue, by creating a replacement, OE standard pump that fits in the space created by the original CP4. They argue the reason it was never changed is because the 6.7 engine was built around this small Bosch CP4 pump and changing it to a larger pump would simply not fit the space or the OE terminals to work with the existing sensors, hi pressure hoses and the like. So they created one, not a prevention kit (which they also have) but an actual pump that fits and works in the 6.7 engine configuration. I cannot confirm or deny the validity of their claim, but it’s worth watching and making your own assessment of the S&S CZcams video. czcams.com/video/hNXIH-JNg30/video.html
Thanks! That's good to know!! Will definitely check it out.
you mentioned that the cp4 pump was designed for European diesel. I am currently living in the Philippines and looked up what standards are being used here, since about 75% of the vehicles here are diesel. The diesel in the Philippines is manufactured to the euro4 standards. that should be just fine for use with the cp4 pump. Just for an FYI, the f150 is being sold here as a new truck with the 3.0 power stroke and in the ranger they are using the 2.2 diesel, although it is not called the power stroke. I am in the market for a new truck and I wanted to know what I would be getting into with a f150. now I know. thank you.
F150 hasn’t been sold as a diesel for two years in the US. I recommend the Ranger diesel
I would put the S&S pump asap too not worry about that problem!
It was funny you never mentioned that Ram issued a factory recall on 2019-20 and replaced all cp4 to cp3 at no cost. Maybe ford doesn’t want to stand behind there cp4 failures because the customer will pay for it if they want there truck. Customer service
My 2011 6.7L engine runs a lot better and quieter with the S&S disaster prevention kit. Not sure why except maybe more fuel is available to enter with bypass kit. I think one of S&S videos explained that. I forget all the details but it does improve the torque at higher RPMs before falling off.
Because if they changed it they would have to admit there is a problem with it
THEY FAIL ALL THE TIME .THERE IS NO MONEY IN FORD PUTTING BETTER PUMP IN FOR THEM ITS A MONEY MAKER FOR FORD ESPECIAL IF THE WHOLE ENGINE FAILS AT 23K PLUS
Wrong on the European fuel and American fuel. Myth debunked
CPX pump is out and has been for nearly a year. Best solution.
GM denied denied denied on the LML. Told the judge in a class action lawsuit the consumers used bad fuel. Oh yeah say how so GM when your owners manual states to use low sulphur fuel. They could have saved themselves millions of $$$ had they told consumers to use fuel lube additive. I'm waiting on my payout GM for what you owe me! My LML CP4 failed after a mechanic put in a Exergy FPR to catch a failure. I suspect air got into the pump. Kaboom! I suspect a Ford because of an additional pump and less chance of air getting into the fuel is why they have had fewer issues. I run a fuel lube additive in my F250. Plus I have the S & S prevention on it.
If you can't afford the new S&S pump get the disaster prevention kit and run fuel additives that increase lubrication. Hot Shot Secret and Archoil are Good.
Probably better fuel filtration, I’ve had two 6.7 without any issues and don’t know anyone that has had issues.
Sounds like that's the case! Guess GM really screwed the pooch with the LML, giving it no lift pump and minimal filtration.
Ford makes better trucks that’s why obviously.
Everything is great in a classroom setting but honestly in the real world testing the multiple variables in fuel it’s a poor design and the facts are Bosch will be replacing people’s engines or something like that after the lawsuit is over absolutely poor engineering from a logical standpoint! Life isn’t in a controlled environment water gets in diesel that’s a fact of life has been for 90 years 🤣
Get it deleted and your problems are solved.
My truck is deleted, but how does that solve the cp4 issue? I’m genuinely interested to learn.
Mine was deleted and the cp4 still took a dump on me. And I stay on top of filter changes, additives every fill up and never let the tank get below a quarter of a tank. Word to the wise, if you can afford it, get the S&S dcr pump or bare minimum get their disaster prevention kit.
Sorry, wrong system.
He means buy the 6.2 gas😂