How to HOT TAP like a PRO!!! // Is the Aquatap Mach 1 worth $2,000?
Vložit
- čas přidán 19. 08. 2023
- Brian hot-taps a pressurized waterline using the Aquatap Mach 1 hot-tapping machine. Then wonders if the Mach 1 is worth the hefty $2,000 price tag. Also in the video...connecting the corp stop to a 1" poly line using stainless barbed fittings. Pieces and parts can be found in the links below:
Hot Tapping Machine: www.aquatap.com/
Hot Tapping Saddles: bs-products-com.3dcartstores....
Stainless Barbed Fittings: www.merrillmfg.com/collection...
Corp Stop: www.usabluebook.com/a-y-mcdon...
Blue Monster Heavy Duty Teflon Tape: amzn.to/44bGHIh
Blue Monster Teflon paste: amzn.to/3P3wHwc
2 Piece Channellock adjustable wrench set: amzn.to/3E494xq
Channellock wide mouth crescent wrench: amzn.to/45yfalo
Stainless wire brush 3-pack: amzn.to/45uX7wV - Jak na to + styl
This is awesome!! We're glad that you were able to get the job done with your Mach 1 Hot Tapping Machine!
Me too! Thanks for making a great product! It really is one of those tools that if you need it you NEED it!
Depending on your situation, that tap could be priceless. Very unique and handy tool.
Thanks Rick, I can see it paying for itself in about 3 years, if I score some other hot tap jobs.
Hey Brian, nice work! I would say you are now in the rental business. I'm sure a few folks in Surprise Valley can use it.
Hi Ken! I would have to agree with you! Been thinking about that for awhile now. Seems like it could be a pretty good way to make some money back on all these spendy tools. Best!
Another tip. If you use both tephlon tape and pipe dope the tape goes on first then the pipe dope on top of the tape. This way the dope can do what its supposed to and fill any small voids. When you do it backwards the dope is only under the tape on one fitting and not filling voids on both, the tape is trying to do the job of the dope when you do it the way you did. 😁👍
Thanks for all the tips! Sounds like you have been plumbing for a while!
@@BidwellCanyonFarm not too long. Almost 17 yrs now. Loved the video, I'm definitely gonna keep watching
but: shouldnt the dope be on both sides of the tape then?
good video!
Thanks partner!
What about the metal shavings in the tap that can and probably get into the pipe?
Ok, I see how it saved the shavings. Definitely a neat system and well thought through.
I think the leaky fitting (I kept complaining about) actually helps by allowing water pressure from the main line to keep shavings from entering the system.
Yes the shavings go into the pipe, there's no way around it when hot tapping
Great tap. Even if you need it once its cheaper than paying me to do it.
Thanks! It is a pretty special tool. When you need it, you need it bad!🤙
A tip from a licensed plumber. Typically shark bite fittings are for temporary repair because it seals with a rubber oring and rubber will go bad and it will 100% leak one day and need to keep being repaired if you keep using shark bites. If you have the tool it's best to expand or crimp the fittings on, depending on what type of PEX pipe you're using. And those fittings are extremely less likely to ever leak if done correctly. But I doubt you have the tool that's why you're using shark bites. But IDK just a guess. Awesome video though. 👍
Sounds like I need to invest in more tools! Thanks for the comments!
Copper press fittings (e.g. Viega ProPress, MegaPress) also rely on o-rings. They've been used successfully in Europe since the 1970's.
What is the point of the coupon in the drill bit?
There is a little piece of wire threaded through the bit that binds the piece of the pipe wall (coupon) cut by the hole saw. This keeps the coupon on the end of the bit and does not allow it into the plumbing system.
Which is the best bore on top are on the side
Hi Earl, I am not sure which is best. Typically, I see them on the top portion of the pipe but not right out of the top center. Slightly off center toward the direction of the water line which allows the water pipe a strain relief bend that helps with backfilling and gives a little pressure relief to the fittings. Hope this helps!
Thanks so much for responding. So in your experience which one work best for you
Cause mine is on top and i have ro used a water pump yo get water if not no water for me
45° angle up is usually the best. top taps get hit while digging, but 45° still allows air that may be in the main to get out
Would you be interested in selling for a reasonable price?
What is a reasonable price?
Wow. For $2000 it should've came with the drill, battery and charger. Thats crazy this company is doing this to their consumers. SMH
Yeah, you would think they would hook it up for that price!
Poly way too hot
Yeah, i think i got her a lil hotsy-totsy. What do you look for when you heat your poly? Thanks!
We use mostly copper here in northern Illinois,but occasionally when we use poly I just muscle it on with some lube
Yes some lube and some muscle works for me most of the time, but sometimes I gotta bust out the torch and warm up the pipe to make it barely soft enough to flex. If it's smoking you're using too much heat. It should only take about 10sec (give or take depending on the temperature outside) until it's soft enough to press on easily
dont try at home
Haha, yeah. It is a bit scary.