FOX FITTINGS Hot Tapping - Saddle 400/225, Nawiercanie pod ciśnieniem- Siodło 400/225

FOX FIITTINGS offers its customers electrofusion branch saddles with big size outlets, together with drilling equipment produced also by FOX. Video shows the connection of the existing pipeline 400 mm to a new pipeline 225 mm - the works were done on working pipeline under pressure in Tychy (Poland).
FOX FITTINGS oferuje swoim klientom siodła elektrooporowe z odejściami w dużych średnicach, oraz urządzenie do nawiercania pod ciśnieniem również produkowane przez firmę FOX FITTINGS. Film pokazuje podłączenie nowego rurociągu o średnicy 225 mm, do istniejącego rurociągu o średnicy 400mm. Prace zostały wykonane w Tychach, na zlecenie RPWiK Tychy S.A.

[@mergenhayes]

You guys have real tools wow! Good job!

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@babooll5632]

I have worked in the waterworks supply business in the states for several years, but this is my first exposure to this technology. Very impressive

[@frank6048]

What is the normal/old procedure for the same job?

[@JELEN1976]

Piękna praca i zawór zamyka "sikovkama"

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@bluesman97]

Done right ... looks like a winner.

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@mead6754]

Top job lads

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@rachelann864]

Hot Tap Procedures:
1. A hot tap saddle or weld nozzle installed, valve installed, assembly is pressure tested and hot tap machine attached.
2. Valve opened, hot tap completed, coupon or cut portion retained by latches on pilot drill. Pressure is contained within the hot tapping machine.
3. Cutter and coupon retracted and valve closed. Fluid is drained and hot tapping machine is removed. The tapped valve is now ready for the contractor’s tie-in or IFT’s linestop/stopple equipment to be inserted.

[@jamescosta1174]

Damn well said

[@AbbeyOmisol]

what kind of weld material is used. I am assuming that liquid they wipe the pieces with, correct? I just can't believe that with that pressure a liquid well is more than enough.

[@joelcauchi6442]

@@AbbeyOmisol electrofusion poly welding

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@coconutdrop2962]

that was a clean job, good stuff

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@ashfaqalam893]

Brilliant my friends

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@genarosica6602]

Excelente, muy buenos técnicos, felicitaciones ,soy experto en plásticos reforzados y FRP.

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@dav1099]

thats cool ! like the music too, thanks for posting

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@dmitryl4238]

zajebiście :D

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@buhaysauditv9035]

Amazing

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@androcoper7428]

Good work

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@BurbSK-bi2wh]

That is one damn strong adhesive !

[@alipacheco8149]

I believe it´s electrofusion, not an adhesive. You can see it at 3:24

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@egon0000]

brawo

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@CanISpoonYou]

I always wondered why the packing goes out on these big gate vales so quick. They use it as a lift point.

[@andyfilkohazi3052]

Nice!!

[@andyfilkohazi3052]

Acme tapping LLC nice job!!

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@conanmclennan4354]

We're not allowed to hand peel or scrape here in nz

[@Chrominance87]

This is pipefitting right?

[@user-dc2ux4eq1r]

What is the name of this device that is used to perforate the tube

[@GULF-BANK]

Are those roots, or custom cut flooring for this job?

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@RbBski]

Alot of faith in them heat welds.Yes I know apperentlty it is stronger then the actual pipe but still ?

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@longlivepakistan5870]

valve take one man. Because every one look like jhon cena😊😊😊

[@ahssenbelhoula8603]

Wonderful I am a fan of this profession I want a website to get a welding certificate

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@mostafaparvizi2827]

Secondly, where in the world do they open and close the valve with a wrench?

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@TruePM621]

Main line 400mm dia is polyurethane so easy to work. If its Cast iron/Steel then ? How you will do then same job?

[@Paramedico]

Nearly the same but not so fast. Shut off Main, Let it Empty out, Cut Main, Insert T+adapters, fill Main

[@HuNtTaz3000]

Pretty much same. In finland we have these drilling bands to put on the pipe and the just drill the hole same way as they did

[@membadifusfuk]

Compression fittings. Called a tapping saddle.

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@danielp6629]

The plug you cut just goes into the main ? Seems like it will cause problems down the line somewhere. But I'm a sewer guy:-). Pipe bursting

[@klobmiester]

No it’s in the cutter at 6:50 as a black cutout

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@ffgamingyt9081]

Please let me know how to join 20mm HDPE pipes ,bends and flanges

[@jankrywiczniak4365]

@SivierUtilities Or just use plasson push fits

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@amiah3240]

how the water pass???
they didnt make hole?

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@rodneydean8964]

Do you have an American distributor?

[@thetcoulter6389]

What are you needing?

[@foxfittingswelding]

Not yet, if You need more information- We would be happy to help [e-mail]

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@Irfanali-cc1rb]

I am a plumber I have 12 year experience in my work Pakistan

[@rigakit]

What was the adhesive?

[@alipacheco8149]

I believe it´s electrofusion. You can see it at 3:24

[@klobmiester]

Has a built in iron in the fitting that melts the plastic to bond together, I work with the stuff and still don’t trust them lol

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@wakbusromusa9511]

More on the product? Minimize the cost ot the machine...

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@iyyappanav6199]

I well working tha jab to UAE

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@mostradadz3037]

Y a-t-il du travail avec vous?

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@artur2104]

An für sich alles richtig aber das nächste mal ohne Handschuhe und der Handscheller ist eben so verboten :)

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@patrykbanaszkiewicz9786]

Pracowałem przy wodociagach 10 lat i stwierdzam że panowie się za długi pierdola.....

[@pawelkrawczyk4410]

No to wiedz że się chuja nauczyłes przez 10 lat :)

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@user-ps5er2jh8x]

good job , but i need for hot tapping oil and gas

[@foxfittingswelding]

Its also for gas

[@zawraqjadeed4021]

أحمد الخليفة where is is located your company

[@zawraqjadeed4021]

I’m gas oil gas pipe line material Supplire in Qatar if you have any query so plz contact me on this number 009474491898

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@MilanDupal]

Not nice to use a pipe wrench for closing the valve!

[@Machinist-wf1iw]

Milan Dupal it was a special wrench made for closing a valve look again not a pipe wrench

[@matthewiles2660]

Why not?

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html

[@abdelmajiddahjaoui5352]

.

[@purusoththarma1585]

czcams.com/video/0HlgzSAwuW0/video.html