Hardwire Install | Nestour Ambient Lighting | Tesla Y
Vložit
- čas přidán 7. 03. 2023
- Hide your wires! Hardwire your Nestour Ambient Lights to your Tesla Y. Do not blindly follow the Nestour installation. This is a modified step by step installation video.
Hide your wires with a clean install. And don't plug it into your 12V socket. Hardwire it to a switch so you can turn it on and off.
Don't void your warranty by connecting it to the 12V battery or the wrong wires. Better yet, put it on a switch and a fuse.
Nestour Ambient Lighting - amzn.to/3J1FURp
Solid State Relay - amzn.to/3WjmA6S
Tools:
Multimeter - amzn.to/3i0Zxzy
Here's a good trim tool set - amzn.to/3Gsmsxo
Should be in everyone's toolbox:
Torx 20 bit - amzn.to/3YnHRxO
We use Posi Taps on all our cars - amzn.to/3WOp3a7
because it fits into tight spaces, is the most secure and won't come loose.
mini-fuse holder - amzn.to/3vqwZCG
spade connectors - amzn.to/3IeqlXQ
Wire stripper - amzn.to/3hWMPBW
silicone wires 20AWG - amzn.to/3GqzbQS
silicone wires set - amzn.to/3WSf2Ja
=====================================================
🡇 CHECK OUT OUR OTHER VIDEOS:
➤ • Don't void your warran...
➤ • Tesla TV Screens | 12v...
➤ • Tesla 2022 vs 2023 | D...
=====================================================
IF YOU LIKE THIS VIDEO, PLEASE HIT THE 👍THUMBS UP THE BUTTON, SHARE AND WE WILL BE WONDERING IF YOU DECIDE TO 🙌SUBSCRIBE 🙌 TO OUR CHANNEL:
🙌SUBSCRIBE HERE 🡇
➤ / @teslamods
🔊Disclaimer: This video/content and the resources on the CZcams Channel is only for our audience's entertainment and or educational and informational purpose only.
#teslamodely #teslainstallation #nestourlighting - Auta a dopravní prostředky
Overall, great video. One suggestion though, please don’t shake the camera in your video. It is extremely hard to focus and create headache when watching. Again, thank you for awesome instruction.
Im not brave enough to do this, but damn it looks good!
this is great video !!! this is just the one i was looking for.
on model Y, since it already comes with foot well light can we us it as relay input ? ( 3 (-) & 4 (+) from light ) and use aftermarket ambient light?
thanks in advance
Any way to connect it to the 12v supply that turns off in sentry mode?
Hello sir! are you from the bayarea? Would appreciate your help to install this. Also can you please link those portable monitors behind the seats?
Nice! I’ve been trying trying to hardwire my Viofo dashcam but have been struggling to install it.
take a look at this dashcam install - czcams.com/video/qlx7t74Upxk/video.html
@@teslamods nice video I also my radar detector set up like that too. However for the dashcam I can’t find a constant source of power😞
Hello does it matter if my relay is 100dd compared to 10dd?
How can i switch the kit to de dark night mode of the Screen rear ?
So just to be clear, the relay and the accessories must be tied separately into negative? It was not shown in the video. Relay to negative, accessories to same negative. Correct? So I could use a 3 port push connector to have port one to car negative, port 2 to relay negative, and port 3 going to accessories negative? Thank you in advance.
yes, they can all go to the same ground. The only reason to have different negative points is just clean wiring. If I'm working on the left side, I'll find ground on the left, instead of putting a 6 foot wire going all the way to the right.
@@teslamods that makes sense, thank you. I must have voltage leak somewhere because the relay is causing the accessory power to fluctuate on/off at about 2hz. I thought it was the back of the relay causing it, but even taped up, it continues. Maybe I just got a bad relay nice every other connection is thoroughly secured.
Thanks again
Great video, the clean installation is nice. I don’t see the relay link, can u please provide a link
thanks! I put it in now. nice catch, because not all relays are good for the tesla.
I just installed this kit tonight, and was very upset when I realized that the fiber LED's red don't work, meaning yellow and purple also don't work... it took me forever to install, any advice?
the fiber itself is a conduit. the problem may be the light source - the metallic piece where you connect your fiber. Connect power and see if all the colors work on all the metal pieces. if not, it cannot be repaired. return it.
@Tesla Mods PJ I already issued a complaint with Nestour and they are sending a replacement. The 4 LEDs that connect to the fibers don't light up red. The footwell lights work fine.
26:08 i have Tesla Model Y 2023. But i dont see this blue connector in there.
Where tesla moved it to ?
You end up figuring out bro I have Tesla model y 2023 aswell
I like this tutorial with the exception of tapping the wires. This just voided your warranty on the entire car wiring. Yes, all of it. since you spliced into the CAN bus, Tesla will never repair this car again for free if anything is wrong with the electrical or computer systems... not smart