Video není dostupné.
Omlouváme se.
Philips TV Black Screen WITH Sound | Sound But NO Picture | 10-Min Fixes
Vložit
- čas přidán 10. 10. 2023
- If your Philips TV has sound but no picture or a black screen with sound, then you can diagnose the cause, and find out how to fix it, using this video.
In 60% of cases, you have a backlight failure, but sometimes the cause can be with the internal components, or even something as simple as a software glitch.
Read the full article:
www.lapseoftheshutter.com/phi...
Read the full article: www.lapseoftheshutter.com/philips-tv-sound-but-no-picture/
Hi Sir
my
55pus6703/12 6870c-0535b
I have backlight and sound. When I disconnect on strip line I get half of screen only white.
ia this about t-con board?
Excellent overview of the problem, easy to follow by non-tech guy (ie me !), I feel very confident I can fix my problem Thanks once again 👍
Thank you for all the tips!
For me, unplugging and re-plugging all the cables fixed the issue.
thanks to this, i learned that i sadly need a new TV ;( it sucks more because i got a 50" Phillips TV with ambilight for about $400... which was about 50% off at that store... and the backlight just *poof* died...
awesome video, thnaks mate
Casting this on my broken Philips. Atleast the sound is ok.
Its work, thank you
Question - my TCon board shows picture on half the screen on both sides when you unplug either cable. I got a second hand TCon board but that one only shows image on 1 half with either cable unplugged? Is this a problem with the replacement TCon board or perhaps something else?
My Philips 58pus7805/12 has no pictures but the screen is still blue-ish. Any advice? Sound and surround lights are working
did you get it to work? same problem as me
I've got the blue screen too, and it randomly works every few weeks. We'll just turn the TV on, and then it works until we turn it off again. Or it shuts off, and then it doesn't turn on.
@@th3o159 same problem as me. 😢#sadfaceemoji
I just got that problem
What if the picture goes off intermittently? For a while now, the screen has blanked out to black (with sound still going) a few seconds or even several minutes after turing it on from standby. Turning it off with the remote, then turning it on again would fix this after a few tries. Sometimes the screen would then stay on for hours, sometimes it would turn off again after a few minutes, or maybe within half an hour. Recently however, no matter how many times I turn it off and on again, the screen only stays on for a minute. I doubt it is the screen or backlight, it seems to be related to powering on and standby. While turning on, the diode switches from red to white, and it pulses between weak and strong white light, sometimes it keeps doing this for a long time.
I have a question for you
I got a Philips flat screen T.V with sound but no picture. I toke it to repair and he changed the control board. The T.V will run normally for whatever time until you turn it off and then turn it on again. It will be back to the same problem, sound but no picture.
Do you have an idea what could be the problem?
any advice about my 55pus6703/12 6870c-0535b
I have backlight and sound. When I disconnect on strip line I get half of screen only white. is this T-CON board?
My problem was lines on the screen on and off then it just showed blackscreen after a few weeks. I unplugged one of the ribbon cables from the T-con got white screen on half screen and picture on the other half, did the same with the other ribbon cable and got it reversed, then i plugged both back in and got the black screen. is this a T-con problem then, should I just replace it? Could it be somthing else?
Hello
Have the TV (philips 55pus6162/12) switched on, after about 1 hour a bang was heard and the display went black, only the on/off led light was on, disconnected all the cables and tried to start again but the same result, black display and led light on.
What could be wrong?
hello i have a philips TV have a issue when i switch on the TV the pannel is working main board has two green lights showing but pictures in the beginning there was a full vertical line issue i changed the T-con board but still no picture only a black screen but the pannel is working i hope because i have checked half screen test with tcon then i get white screen on the half i tried with both sides i got half white screen on both sides i have tried changing ribbon cables but still no picture the backlights are okey working perfectly a permannent line on pannel that is also showing so i think pannel is also, can you help me to find asolution for this how i can find the solution for this.
it is 65 inch philips smart tv 2019
I have a white screen ,no picture .has sound.
My tv quickly flashes the Philips logo when I switch it on, then goes black, there is sound and when I shine a torch at the screen there is picture. What could cause the back light to go out? It obviously still works if it’s on for a split second when I start the tv. Thanks
Have you fix it?
@@mariusconstantin7569 no using spare tv for now, after a month of leaving it. Tv came on and worked fine for about ten minutes then backlight stopped again and it went out.
exactly the same thing here u got something write me back if u had a solution pls im thinking opening it up and i wil but u know id like to now for sure so i wont take unnecesary risks
50PUS6162/12 ?
My TV suddenly went dark when I was watching Netflix...I use torchlight and I see the images... I've put my TV ambient light off.. Please tell it's easy to fix 🙏
You must change the backlight.
Space running out