How I sharpen a drill bit as sharp as a razor in just 1 minute || drill sharpener

Sdílet
Vložit
  • čas přidán 23. 03. 2024
  • How I sharpen a drill bit as sharp as a razor in just 1 minute || drill sharpener #kusangwelder #diy #dance #tools
  • Jak na to + styl

Komentáře • 98

  • @sangmai4983
    @sangmai4983  Před 23 dny +3

    czcams.com/video/LoMGSnGss6E/video.htmlsi=ixzRK7g0GpbPM1E0

  • @nicosgeo
    @nicosgeo Před měsícem +29

    Using the side of a cutting fiber disk as grinding? That's a Darwin award act.

  • @ICOWBOYIM
    @ICOWBOYIM Před 21 dnem +30

    You missed the relief angle, the secondary angle, the cutting face is a compound angle of two intersecting angles that is determined by the material being cut. There are reference charts available for that info. on line.

    • @sangmai4983
      @sangmai4983  Před 21 dnem +5

      Thank you for giving me your opinion❤️👍🤝

  • @contrarian8870
    @contrarian8870 Před 19 dny +20

    Seems like "1 minute" is now 9 minutes long

  • @tunafish3216
    @tunafish3216 Před 9 dny +5

    That’s got to be the most dangerous drill bit grinder I have ever seen ! !

    • @sangmai4983
      @sangmai4983  Před 9 dny +1

      If you are a responsible worker with a good mindset, you will definitely be safe❤️

  • @ZenMinus
    @ZenMinus Před 20 dny +22

    PLEASE, viewers of this video, DO NOT attempt this method. What a load of crap! This should be removed form youtube! This NOT the way to sharpen drill bit. This is the worst drill "sharpening" I've ever seen. There are so many things wrong in this video, including the DANGEROUS USE of cutting disks. The angles are wrong, at 8:27 you can see how bad the angles are!

  • @mikeford5106
    @mikeford5106 Před 21 dnem +15

    How NOT to "sharpen" a drill but !!!

  • @domading2759
    @domading2759 Před 4 dny +1

    I'm not going to say its the best way to sharpen.. But don't be so down on the grinder disc use.. You can safely grind with a cut disc if you know what your doing.. I've got more hours welding then most people have driving.. Been doing it a long time

  • @ricardogastmann9688
    @ricardogastmann9688 Před 15 dny +3

    I understand you! Because I did the same with my drill bit in the past..
    These people haven't idea (neither the quality of Makita tools...) what is in the middle of the work your drill bit not cut... Greetings from south of Brasil 🤗

    • @sangmai4983
      @sangmai4983  Před 15 dny +1

      First of all, I thank you for your comments on my video, but this is my daily job, I've been working on this idea for years, I have many ideas but I don't have time to do them right now, I will work hard to come up with many useful ideas for everyone to see, I am from VIET NAM❤️

  • @daddydawg1902
    @daddydawg1902 Před 4 dny +1

    I like the impldesigin.Nice video . THANKS

    • @sangmai4983
      @sangmai4983  Před 4 dny

      Thank you very much, my friend. I wish you good health❤️❤️🤝🤝

  • @kevowski
    @kevowski Před 7 dny +2

    Can someone at Red Bull racing hire this guy as Max Verstappen’s chief engineer please?

    • @sangmai4983
      @sangmai4983  Před 7 dny +1

      Surely my cow will win first prize globally😂😀❤️

  • @RickaramaTrama-lc1ys
    @RickaramaTrama-lc1ys Před 10 dny +3

    Nice video but all my bits that need sharpening are little ones and they are the real Bear to sharpen~!!!!

    • @sangmai4983
      @sangmai4983  Před 10 dny

      Thank you friend, I wish you good health❤️🤝

  • @christopherort2889
    @christopherort2889 Před 22 dny +5

    You always dimple the metal before you drill it. That keeps the bit from wandering

    • @sangmai4983
      @sangmai4983  Před 21 dnem

      Thank you for your comments, I will absorb them and motivate you to learn❤️👍

  • @jeffmarett321
    @jeffmarett321 Před 15 dny +3

    This is not how it's done. Most grinders even come with a 60 degree slot for sharpening drillbits. Even if it doesn't. This is not how it's done.

    • @sangmai4983
      @sangmai4983  Před 15 dny +2

      There are many ways to sharpen drill bits, this method is for use in urgent cases, thank you for your interest in my video❤️

  • @robertbryce7626
    @robertbryce7626 Před 12 dny +2

    I hope you understand. Pathetically long and undesired commercials that I can skip gets the video watched. If I can't skip them, the video does not get watched.

    • @sangmai4983
      @sangmai4983  Před 11 dny

      Hope you understand for content creators like me, I thank you for your time. I sincerely appreciate it❤️

  • @scottnusser6232
    @scottnusser6232 Před 23 dny +8

    Buy a drill doctor 😂

  • @dgoddard
    @dgoddard Před 4 dny +1

    Watch me turn a 1 minute task into a half a day long job with crap you might not even have in your garage.
    Geez. Tell me you don't use your brain without telling me you don't use your brain.

  • @kidjellesed
    @kidjellesed Před 18 dny +6

    This video is how to hurt yourself and ruin your bits.

  • @user-ec7lw3cq7b
    @user-ec7lw3cq7b Před 3 dny +1

    198K views good job.

    • @sangmai4983
      @sangmai4983  Před 3 dny

      I sincerely thank everyone very much❤️❤️❤️❤️🥰

  • @davidtaylor8244
    @davidtaylor8244 Před 15 dny +4

    Jesus, Just buy a small bench grinder as cheap as an angle grinder and will do the job safely and properly I can sharpen HSS drills in around 10 secs on a bench grinder. What utter rubbish, please don't anybody think this is a good idea or clever in any way this guy is clueless

    • @sangmai4983
      @sangmai4983  Před 15 dny +1

      This is an idea when going on a construction trip or in urgent times that will help you sharpen your drill bit right away and help those who do not have the funds so this is also called an idea, thank you for your interest. heart❤️

  • @JosephBoxmeyer
    @JosephBoxmeyer Před 10 dny +1

    Thanks. But if you costruct your aluminum angle oppositely the drill bit will not attempt to rise when being sharpened.

  • @tommypondsteen
    @tommypondsteen Před měsícem +5

    Dude, thats just dangerous. If you decide to do this, wear some face armor.

    • @sangmai4983
      @sangmai4983  Před měsícem

      Thank you for your words of concern for me❤️

  • @robertmceuen3630
    @robertmceuen3630 Před 16 dny +2

    Just looked at your replies to the commentors. You're just a smartass.

    • @sangmai4983
      @sangmai4983  Před 16 dny +1

      Thank you for your comment, I just want to create content from what I know in my daily work❤️

  • @Crlpope
    @Crlpope Před 4 dny +1

    Forced add before you can what you came to see should have choice if you dont care for the product

    • @sangmai4983
      @sangmai4983  Před 4 dny

      Thank you for your feedback, it makes me more motivated❤️

  • @nevillegreskie6545
    @nevillegreskie6545 Před 9 dny +1

    The hole is not round, so tberefore not sharpened properly.

  • @kevinpotts9583
    @kevinpotts9583 Před 26 dny +3

    you could ride bear arse to London on that drill i was in engineering for 42 years and was taught properly

    • @sangmai4983
      @sangmai4983  Před 26 dny +1

      Sorry if I could ride a bear then I would be a fairy😁

  • @Patrik6920
    @Patrik6920 Před 12 dny +1

    Note: This is Dangerous! to even attempt and quite bad for the drill...

    • @sangmai4983
      @sangmai4983  Před 12 dny

      Sir, if you are a careful and meticulous person then you will be safe in this job, if you are a careless person then you definitely think this is not safe

  • @j.c.7511
    @j.c.7511 Před 11 dny +1

    we all like i say less than 1 minute will make my son an l one thanks

  • @user-tk7tt3ll5r
    @user-tk7tt3ll5r Před 15 dny +1

    You can’t use 2 blades , why didn’t you use a thicker grinding wheel?

    • @sangmai4983
      @sangmai4983  Před 15 dny

      Since I didn't prepare a thick grinding wheel, I replaced it with these two blades😁

  • @jonedee1022
    @jonedee1022 Před 19 dny +1

    No chamfer on the edge? I guess this would work in a pinch but certainly not a long term solution.

    • @sangmai4983
      @sangmai4983  Před 19 dny

      That's your opinion, but everyone has their own opinion

  • @mikec3260
    @mikec3260 Před 19 dny +2

    9 minutes later....

  • @jimcook4033
    @jimcook4033 Před 19 dny +3

    Just go buy a drill Dr.

  • @jpnulty
    @jpnulty Před 3 dny +1

    To much fannying around

  • @dreadnaught2707
    @dreadnaught2707 Před 2 měsíci +11

    One of the worst sharpening jobs I have seen.

    • @sangmai4983
      @sangmai4983  Před 2 měsíci

      🥰🥰🥰❤️❤️❤️

    • @sangmai4983
      @sangmai4983  Před 2 měsíci

      I think this is also the fastest way to sharpen your nose

  • @davemartin1534
    @davemartin1534 Před 12 dny +1

    Amateur!! Drill sharping. May work For you on wood but not good enough for iron or steel, every thing that is important is off. Believe you me after 14 years in machine shop experience of sharping drills by hand I took a new drill out of the package and went strait to the grinding wheel. Factory drill shaping is inferior also.

  • @stephenmoore4284
    @stephenmoore4284 Před 14 dny +2

    WHAT A LOAD OF CRAP

  • @XCL34NM4NX
    @XCL34NM4NX Před 20 dny +2

    WTF wrong way… Noob 😂

  • @ronaldpatton5668
    @ronaldpatton5668 Před měsícem

    Good grief! Not another drill sharpener video.

  • @MIKEMAKESTHINGS
    @MIKEMAKESTHINGS Před 16 dny +1

    NICE.

    • @sangmai4983
      @sangmai4983  Před 16 dny

      Thank you so much for your compliment, I wish you good health❤️🤝

  • @robertbryce7626
    @robertbryce7626 Před 12 dny +2

    Wanted to watch the video, but turned it off due to too many bullcrap and long commercials.

  • @sangcokhi9642
    @sangcokhi9642 Před měsícem +1

    Ý tưỡng này vô cùng hữu ích ❤❤❤ chúc mừng bạn

  • @neighborhoodprepped7862
    @neighborhoodprepped7862 Před 20 dny +1

    Why did I waste almost ten minutes watching this crap if it only takes 1 minutes to sharpen?

    • @sangmai4983
      @sangmai4983  Před 20 dny

      The time to sharpen your nose is only 1 minute ❤️

  • @user-uv7up4vg6i
    @user-uv7up4vg6i Před 15 dny +1

    Hopeless for so many reasons.

    • @sangmai4983
      @sangmai4983  Před 15 dny

      Since you haven't done anything like this yet, you say it's hopeless🤝

  • @PapawMule
    @PapawMule Před 23 dny +1

    Think I'll try that..

  • @horacerumpole6912
    @horacerumpole6912 Před 8 dny +1

    Total crap-

  • @buzztoole4751
    @buzztoole4751 Před 25 dny +3

    Definitely a good idea, I can usually get em pretty good freehand but this quick idea for a guide is good. Most of the people making mean comments probably don't know how to use a pair of pliers!

    • @sangmai4983
      @sangmai4983  Před 24 dny +1

      Thank you brother for giving me more motivation. Thank you brother❤️

  • @bartsolari5035
    @bartsolari5035 Před 22 dny +1

    My cousin Donny tried this and lost a thumb

    • @sangmai4983
      @sangmai4983  Před 21 dnem +1

      oh what a pity and condolences to your cousin, please be more careful at work, wish you always good luck

  • @armondeushon7892
    @armondeushon7892 Před 23 dny +2

    Thankyou for this video, I will try this for sure, great idea, noticed your fingers are all rough, you must work hard

    • @sangmai4983
      @sangmai4983  Před 23 dny

      Thank you for motivating me, thank you for taking care of me, I work very hard so my fingers are rough❤️

  • @davemorrison7410
    @davemorrison7410 Před 22 dny +1

    Nice

  • @sangmai1174
    @sangmai1174 Před měsícem +2

    Khá là tiện lợi trong việc mài mũi khoan❤ cảm ơn bạn đã chia sẻ video hữu ích 🎉