Ultimate Router Table & Storage Cabinet (table saw extension wing)
Vložit
- čas přidán 17. 06. 2018
- A router table with aromatic cedar and versatile store, overkill, it's what I do.
Table Saw Router Table Cabinet Plans: bit.ly/2JMQj7U
Details! ▼
► Check out all of the amazing ROCKLER tools and materials used to make this project a reality!
Materials & Parts:
Wide T-Track bit.ly/2lgOwZZ
Regular T-Track bit.ly/2JQhRt6
Router Table ProFence bit.ly/2JZYAo9
Router Lift FX bit.ly/2otzljq
Pro Lift Router Lift bit.ly/2lgcy7k
Cam Clamps bit.ly/2lgtqLe
Power Switch bit.ly/2t3K9pB
Router Speed Controller bit.ly/2JPdIFQ
Dust Collection Remote bit.ly/2t86imG
Tools:
Drill Bit/Driver Combo bit.ly/2nAOUlu
Push Blocks bit.ly/2I2zYWT
Glue Bottle bit.ly/2K01UMZ
Table Saw Sled bit.ly/2lfnAtE
Router Bit Holders bit.ly/2K2tVqk
Feather Boards bit.ly/2ymZ2IG
Router Bit Straight Bit Set bit.ly/2ypMH6A
Router Bit Set bit.ly/2K4RiQ2
Dust Collection:
Flat Dust Port bit.ly/2K2MTgA
Router Table Dual Port bit.ly/2lgNo8P
2.5" Expandable Hose Kit bit.ly/2xhnDO4
Blast Gate bit.ly/2MxlG49
4" T-Connector Fitting bit.ly/2tkF0c3
4" Keyed Bridge Hose Clamps bit.ly/2tlmGzg
Dust Right Dust Collector bit.ly/2JOA1vn
Dust Collection Hose Clip bit.ly/2I2EBQC
► My exclusive solution for hearing protection in the shop, ISOtunes PRO - bit.ly/2uIsq7M
► Full build article - www.jackmanworks.com/ultimate...
This is a super versatile router lift and storage cabinet built around the Rockler ProLift router lift that lives in the extension wing of my table saw accompanied with some t-track.
Here's some of the intricacies of my design: The wider t-track was notched out to allow for the t-bolts from the fence to slide into the blue t-track. I swapped out the hardware that comes with the fence for some cam clamps. The whole cabinet is made from ½” aromatic cedar Purebond plywood that I had left over from my dresser build. The drawer bottoms are all made from 1/4” plywood and those function as drawer bottoms, drawer slides, drawer pulls, and even drawer stops because of the orange PVC piece mounted to the front that I plan on using to label the drawers. The drawers hold wrenches, feather boards, push blocks, and things like that. But most of the drawers are router bit holders, appropriately enough. Each of the holes in those drawers has a combined ¼” and ½” hole so each hole can hold either sized shank router bit. Rockler also makes plastic inserts that perform the same function if you don’t have a lazy millennial in your shop to drill all those holes for you. The door over where the router is located is made from an acrylic sheet with embedded wire mesh. This is a scrap piece that I got my hands on from Jimmy Diresta. It’s mounted using some spring loaded hinges that were picked from the trash, so those hold the door shut. I reused the legs that came on the saw, but drilled and tapped some holes into the side of the cabinets and bolted them on. It’s actually a much more solid solution than what came on the saw, but I’m getting off topic. The dust collection is combined between the table saw and router table and hooks into my small Dust Right dust collector. This is part of what has enabled me to keep my shop entirely free from duct-work. The smaller hose for the fence is held in place with a metal clip on the side of the cabinet and installed in the fence when needed.
\\\\\ GENERAL PANDERING LINKS \\\\\
■ Website - www.jackmanworks.com
■ CZcams - / jackmanworks
■ Instagram - / jackman_works
■ Twitter - / jackmanworks
■ GIFs - giphy.com/channel/jackmanworks
■ Facebook - / jackmanworks
Plans, stickers, t-shirts, etc: www.jackmanworks.com/shop
\\\\\ MUSIC \\\\\
■ Ample Tunes - Rigatoni Revolver
ampletunes.com/
■ Guustavv - Willow Trees
■ Smartface - I'd Rather Sleep
■ Rannar Sillard - We Are Legends
■ Martin Hall - In And Out Of Love
■ Gunnar Johnsen - Scared Yet
Music from Epidemic Sound. Use my link for a FREE 30 day trial!
share.epidemicsound.com/jackman - Jak na to + styl
Full build details: www.jackmanworks.com/ultimate-router-table-storage/
► Check out all of the amazing ROCKLER tools and materials used to make this project a reality!
Materials & Parts:
Wide T-Track bit.ly/2lgOwZZ
Regular T-Track bit.ly/2JQhRt6
Router Table ProFence bit.ly/2JZYAo9
Router Lift FX bit.ly/2otzljq
Pro Lift Router Lift bit.ly/2lgcy7k
Cam Clamps bit.ly/2lgtqLe
Power Switch bit.ly/2t3K9pB
Router Speed Controller bit.ly/2JPdIFQ
Dust Collection Remote bit.ly/2t86imG
Tools:
Drill Bit/Driver Combo bit.ly/2nAOUlu
Push Blocks bit.ly/2I2zYWT
Glue Bottle bit.ly/2K01UMZ
Table Saw Sled bit.ly/2lfnAtE
Router Bit Holders bit.ly/2K2tVqk
Feather Boards bit.ly/2ymZ2IG
Router Bit Straight Bit Set bit.ly/2ypMH6A
Router Bit Set bit.ly/2K4RiQ2
Dust Collection:
Flat Dust Port bit.ly/2K2MTgA
Router Table Dual Port bit.ly/2lgNo8P
2.5" Expandable Hose Kit bit.ly/2xhnDO4
Blast Gate bit.ly/2MxlG49
4" T-Connector Fitting bit.ly/2tkF0c3
4" Keyed Bridge Hose Clamps bit.ly/2tlmGzg
Dust Right Dust Collector bit.ly/2JOA1vn
Dust Collection Hose Clip bit.ly/2I2EBQC
► My exclusive solution for hearing protection in the shop, ISOtunes PRO - bit.ly/2uIsq7M
Now this is a shop project I can get behind! I love the use of color, texture, and creative design elements. Proof that shop projects don't have to be boring!
hopefully it's a trend that'll catch on!
Great job and a very nice looking router table. I have a very similar setup in my stand alone table and found that I got better dust collection by putting a series of 1 inch holes along the bottom of the door. Really helped the airflow.
Wildly underrated channel. 11/10 buddy.
Thanks!! gph.is/2I7uNpI
Paul you did an amazing job on this build. I can’t even remember how many cool parts to this video there are!! One thing to me that stuck out of course was the router bit holders/drawers and then even the opacity (if this is the right word) of the door that has a glow of an amber bulb on the inside. Wonderful job Paul and who cares if it’s overkill....it’s what you wanted and that’s what you got! Thanks for sharing too!!
That was the best editing of any woodworking video I've ever seen. Holy crap. Thank you so much for putting the work into this.
It really shows.
That is a thing of beauty! I like the look of the wood and the texture in the door. Nice job on the router bit drawers being able to handle both sizes of shanks
The only thing better than your project is your editing skills. Great job! Thanks for sharing.
Fantastic build! I might be back! LOL! For this build anyway. I don't have a router or a router table. I'm still saving to buy or build my own table saw. Many blessings to you and your Channel! You bring such great videos and share them with us! Much love!
Amazing! Love the way you made the drawer slides and stops! Genius
Enjoyed this build and all of the gory details! I like how the drawer bottoms are the slides and the pulls also.
Dude, I love your videos! They're educational, inspiring, entertaining and just plain funny! Thanks for sharing!
Man!! I've been wanting to do this to my PCS for about a year. Thanks for sharing. Your content is great and I really like your video style. Keep it up!!
You have truly mastered the art of the tasteful product placement. Honestly love the vids and I hope you're doing well out of it all.
i love your attention to every last detail.
Nothing gets past me! gph.is/2oQQlhG
The only thing better than your build ideas is your video editing. Very well done! Thanks for sharing.
love the plug port cover. Great idea man. keep up the good work I know that router tables gonna get a lot of use
I think this is my favorite build you've done so far. 👍
That's probably one of the better router table set ups that I've seen on YT. It also make good use of space as well as being functional. :)
Oh boy, so nicely done! Loved it! Awesome design. That logo cap so cool!!
Jackman Fix ✅ Awesome work brother!!
Very timely for me to find this video. I just finished building my shop and have been considering incorporating my router table into my table saw. You convinced me with this setup. Thanks for sharing
Perfect! I've been using this setup for a couple of months now and it's been perfect for me so far
Such a great idea, man! Looks awesome!
What an amazing build! It is so beautiful! I love your attention to detail in the 100th degree! Love to watch a master at work. :) Best regards.
Very nice build! Love the cedar, I don't see many people use it but it's one of my favorites.
Very nice setup - love the build video!
You’re the best woodworking channel.
Great video. Not only in content, but just in your shooting and editing. There seems to be a played out style in the DIY woodworking type videos on youtube lately, so this is pretty damn refreshing! Great work!
It isn’t worth doing if you can’t over do it. Very awesome build. Absolutely love this and definitely going to remember this when I build my little side wing for my saw. 👊🏼😁👍🏼
Not sure how I missed this video but this is amazing and exactly what I have been needing(without knowing it). I can’t wait to give It a try.
Awesome job Paul, looks amazing!😍 Great job on the video and editing as well! 👍👊
Great job. Great design. You really upped your game on the video editing. All in all, super nice job.
Best smelling router table in town!
You bet it would bring in some serious questions from guests or onlookers.
Really nice build! Definitely an excessively pretty router table cabinet!
Great build, I really like the two size for holding the bits in place......very clever!
Great build! I have been considering building something on the end of my table saw and now you have provided something for me to consider. Thanks
Perfect!
Güzel işler çıkarıyosunuz. Tebrik ederim.
That's a simple/clean looking and one bad ass build!
Definitely love that multi table it's awesome
Dude, very cool I especially love the wire hole cover retainer... pure beauty for something that's probably only ever to be seen in this video :) Props and respect!
Just when I thought I couldn’t enjoy your videos any more, I didn’t. I’m already at 10/10!
I can't believe Paul made all this with his hands, without any magic and..... using only woodworking tools???? I am so impressed buddy!!!
A very badass build and your gets better every time. 👍👊🤓
Awesome build!
Can you believe it? Just getting to this now. Great job.
I always enjoy your edits, man. I don't have a router table, and no plans to procure one anytime soon, but your content is always quality.
Love your style of videos. The comedic additions are a nice touch.
Underrated channel, as someone else said.
Much appreciated Patrik! As long as people keep watching, I'll keep making
You make such fun and humorous videos. If I ever made woodworking videos, I would like them to be like yours.
Universal bit size holes, thanks for the tip it never crossed my mind.
First time on your channel and really impressed! Probably the best router table solution I have seen! You did such a great job! I've recently figured out that a table wing router table is a great space saving solution for my shop and this build/video is amazing! Well done & thanks for sharing...gotta subscribe! :)
Dude, this is the first video I’ve watched of yours and I was blown away! Excellent job on all accounts. I don’t why I haven’t heard of you before. You make me wanna get better at editing 👌🏻
Killer cabinet! I'm going to pickup a set of the plans as I intend to mount a router on my table saw wing.
Excellant timing, I need this build right now! If I could have hired you in the 80's and 90's as an editor I would have great videos.
The idea is really amazing I will make some improvements to my table, thank you man.
Great to hear Qassim!
Honestly, this is one of the most entertaining videos I’ve seen on CZcams in quite a while. It’s obvious you enjoy what you do here. Thanks for the content!
Thanks for the love Josh! I'll keep enjoying it as long everyone digs the videos still
Underrated channel. No idea why I never came across your videos until I watched the MagSwitch power feeder base from other channels. Gonna watch a lot more of your videos in the coming weeks! New Sub! Thanks!!
Very nice and elegant!
That cedar cabinet looks sweet! The drawer pulls were an interesting touch I didn't expect. 👍🏻👍🏻👍🏻
Thanks!! Those things are pulling double duty. Might add labels to them too just to give them another task haha.
Dude super nice
Love the double bit both sizes so smart-
Impressive editing and insane attention to detail!
I love your videos! Excellent editing!
Elegant?? Great build Paul. I really like how you have everything for the router right there....👍👍
haha self appointed. Thanks Mike!
Honestly my favorite part...your logo wire cover. top notch.
This video is both, educational and entertaining. Great job, amazing router table.
That's the best feedback I could ask for!
Best video I’ve seen in a while from any of the CZcamsrs!
Editing skills are always amazing
You may be the last wood working CZcamsr that still works out of his garage! I'm rockin' that single bay lifestyle too! Keep it up big cat.
Great vid and very inspirational.
Probably the coolest router table I've seen yet! The only thing I would add is labels somewhere to tell what is in each drawer. Subscribed!
Nice build and obviously a lot of time spent in editing the video: well done!
Bad ass router table and I really liked the bit holder idea. Great video editing also...
Yes sir, I like it. So much storage.
Nice job and as always capricious. Congratulations. From Brasil.
That is a fine work you did there..
YO! I really enjoyed this edit. I like the scene change on beat. Good music. Great camera angles. You put just as much detail in your edit as you did the build. The dramatic moment got me! I thought you two were really fighting. You really know how to push your own buttons. Awesome! thanks!
The thing that I'm the best at is pushing my own buttons lol
the editing was awesome too
Excellent proyect!
Great job, guy. Congrats
I really love your videos.
this is the coolest video ive ever seen
love the transitions, great video work! let alone the skill in the build!!
Like always...building beautiful things...and very funny too...congratulations...have a great week.
Have a great week Wagner!
Very good job! 👏
subscribed !! Thank you from Germany !!
I gotta say you used 2 word that are in my non-like column: Ultimate and Rockler. But I gave ur vid a shot anyway and am glad I did. (Meaning Thumbs up to you!) Ultimate because I find anything with that superlative is, well, NOT and Rockler because they on the very bottom of the cheap list if u get my drift. Good quality stuff most of the time though.
You turned me on to how to make bit drawers - half way thru with 1/2" then finish with 1/4 and add bottom -SMART! Oh and the t-track idea was up there too.
Looks great!
The drama to hoopla ratio on this one was perfect!👍👍👍
Nope. More. There always needs to be more ;)
Excellent video!! Always makes me laugh watching everything you put out!! Keep it up brother!!
Always entertaining! Great stuff
You're projects are great and your videos are funny as hell! I just started following you keep up the awesome work!
awesome build. thanks for the ideas
Man I really enjoy your videos! 👍🏼👍🏼 great build Brother!! 👊🏼😉
An overkill on awesome is perfectly fine with me. The dual router shank storage drawers are a fantastic idea and one that I shall shamelessly steal :-D Great work as always.
Steal away! haha
I love overkill :)
Very good video!
Clearly this build was a labor of love, even if you are a millennia! Do U have enough router bits?, LOL! This old " hippy " appreciates the old school application in most of this build. I didn't see a single pointer hole on this or perhaps U did use some & I simply can't remember... Beautiful build here & thanks for sharing it...
Bill on the Hill,
Vermont... :~)
Bel video, sempre molto interessanti, Complimenti.
You're growing on me Jackman... Well done, really well done.
I'll take what I can get ;)
A joy to watch👍
Entertaining as always!!!
Tolles Team.