Ultimate Router Table with Swing Out Bit Storage /// Plans Available!!!
Vložit
- čas přidán 28. 03. 2021
- How to make a Router Table.
A Router Table is one of the most versatile tools in the wood shop, and in this video I show you how I build this Ultimate Router Table with Bit storage and extension wings to help make your woodworking safer and more enjoyable. It features drawers that slide out and pivot to give you access to all your Router Bits, a Rockler Pro Lift with a phenolic router table top, and a fence system that includes a t-track for all of your router accessories.
Build Plans Available: www.komarproject.com/store
Follow Me on Social Media:
website www.komarproject.com
Instagram / komarproject
KOMAR GEAR komar-project-store.creator-s...
Rockler www.rockler.com
Pro Lift amzn.to/3wcMFsn
Phenolic Top Rockler Phenolic Router Table Top | Rockler Woodworking and Hardware
Power Switch amzn.to/3cxAxdZ
Fence Rockler Router Table Fence | Rockler Woodworking and Hardware
Micro Adjustment amzn.to/3u442tM
Flip up stop amzn.to/3diQF1U
Accessory Kit amzn.to/3fnvwGq
Fence dust port amzn.to/3fn09vR
Bits Bits Co. www.bitsbits.com
9112 bitsbits.com/product/udp9112/
Pattern bit bitsbits.com/product/3000/
Roundover Bit bitsbits.com/product/2009/
Flush Trim Bit bitsbits.com/product/udc9112/
Router I used amzn.to/2QJbD2h
Triton Router amzn.to/31vNtuw
Palm Router amzn.to/2ISNoaG
Casters amzn.to/3dlJZjP
Wing Folding Brackets amzn.to/3fpvTQQ
Router Wrenches amzn.to/3fqowJ0
Power Cord Grommets amzn.to/3czuq8E
MY TOOLS
Bosch Drill and Impact Combo amzn.to/2UdyZg7
Bosch GCM12SD Miter Saw amzn.to/36GabQO
Bosch Sander 5” amzn.to/2OdS7XU
Bosch Sander 6” amzn.to/2OeJs7h
Wood Glue amzn.to/2RJEnpP
Finish Nail Gun amzn.to/2vus1cm
My Quiet Compressor amzn.to/2S3aqA7
My Grinder amzn.to/2GGaDUC
Pin Nailer amzn.to/2lUdbYv
Jig Saw amzn.to/3bFbxyt
Bosch Circular Saw amzn.to/2WGQ15U
Japanese Hand Saw amzn.to/3cfcj5q
My Router amzn.to/2ISNoaG
Track Saw amzn.to/36UuCLr
OTHER FUN VIDEOS YOU MIGHT LIKE
Closet to Office • I Transformed my CLOSE...
10,000 Pencil Table • Epoxy Coffee Table out...
Wood Lowrider Bike • Making a ALL Wood Low ...
Backsplash Tile Installation • How to Install a Subwa...
Peel N Stick Flooring • How To Install Peel-an...
Laundry Room Makeover • DIY Laundry Room Makeo...
Concealment Flag • Motorized Concealment ...
Walnut Knife Block • How to Make a Solid Wo...
Pallet Kallax www.youtube.com/watch?v=MLS_l...
MATERIALS USED
Euro Hinges amzn.to/2O6K95I
Gas Strut Lift amzn.to/3qjbxL9
Paint Smell Pack amzn.to/3ri1NC8
Barn Door Hardware amzn.to/3qkAvcV
Mini Projector amzn.to/3bhIbZl
Pocket Hole Jig amzn.to/3c4DFfS
Pocket Screws amzn.to/3bZEzKE
MY FAVORITE TOOLS
Best Clamps Ever amzn.to/3qj9gQ2
Bosch Drill and Impact Combo amzn.to/2UdyZg7
Bosch GCM12SD Miter Saw amzn.to/36GabQO
Bosch Sander 5” amzn.to/2OdS7XU
Bosch Sander 6” amzn.to/2OeJs7h
Wood Glue amzn.to/2RJEnpP
Finish Nail Gun amzn.to/2vus1cm
My Quiet Compressor amzn.to/2S3aqA7
My Grinder amzn.to/2GGaDUC
Pin Nailer amzn.to/2lUdbYv
Jig Saw amzn.to/3bFbxyt
Bosch Circular Saw amzn.to/2WGQ15U
Japanese Hand Saw amzn.to/3cfcj5q
Track Saw amzn.to/36UuCLr
Saw Blade amzn.to/2KzsQ8j
Dado Blade amzn.to/3mUlvlm
36” Ruler amzn.to/3kK6ild
18” Square amzn.to/3mLXwoF
6” Square amzn.to/2RWwyMD
OTHER FUN VIDEOS YOU MIGHT LIKE
Closet to Office • I Transformed my CLOSE...
10,000 Pencil Table • Epoxy Coffee Table out...
Wood Lowrider Bike • Making a ALL Wood Low ...
Backsplash Tile Installation • How to Install a Subwa...
Peel N Stick Flooring • How To Install Peel-an...
Laundry Room Makeover • DIY Laundry Room Makeo...
Concealment Flag • Motorized Concealment ...
Walnut Knife Block • How to Make a Solid Wo...
Pallet Kallax www.youtube.com/watch?v=MLS_l...
#router #routertable
Music By: www.epidemicsound.com/sfx/ - Jak na to + styl
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Best router table build on CZcams!!
Thanks so much !!! I love this thing and use it all the time. My favorite part is the bit storage
Didn't know locking shelf brackets existed, thanks. Just ordered 2 pair.
Very welcome David. Ya they have all sorts of them
Bro... that's the best router table I've ever seen. Amazing job, Bart.
Thanks Drew!! I stole your idea for the wrench drawer and I’m keeping it lol. Really appreciate it brother !!!
Good video but i dont sub to those who use CNC.!!! That is not woodworking its robotics
Bad ass bit storage boy👊🏼💥💪🏼
I don't know why, but CZcams never suggests your channel to watch and I'm subscribed too! I am subscribed to so many woodworking channels I forget but I won't forget you after this build!! That is one SWEET router table!! The table I built is very similar in design to yours(The basic design most follow) with the exception of those awesome drawers! Now, I'm just a hobbyist, so I don't have quite as many bits as you but, I'm ripping out my drawers and redoing them like yours. What a clever idea!! I wish I had a CNC to inscribe what you have-"Big-Ass Bits"! Laughed so hard when I saw that. Keep up the incredible work you do!
Thank you so much
Lights are cool addition 😂
MAN, THAT'S A GREAT-LOOKING TABLE, I HAVE BEEN SEARCHING THE NET FOR SOME GREAT IDEAS. THANKS
You are very welcome brother
Just saw this for the first time and it earned my subscription!!! Nicely done!!!
Wow....amazing man, I really like your idea style of wood working . Well done mate
wow probably the best router table I've seen!
Thank man
Daaaannng! This truly is the Ultimate Router Table! So incredible bud!
Thanks Ethan! Really appreciate it brother !!
Omg congratulations is amazing great job 🎉
That's a manly looking functional router table.
Id toss some bottle openers on it for drawer pulls to add to that rugged look! Lol
Use 1/2” gas pipe flange, 1.5” nipple and cap for the drawer hardware. It would look awesome with the pallet plank. Industrial meets rustic. Love the build and the flip up wings are dope! I had the same idea for my build. Nicely done!
Awesome router table! Really like the pallet facing...
Thanks Fred. They have come in handy a couple of times already
Good job 👏
👏👏👏👏👏👏Bravo.. excelente...
Thanks man
That is a thing of beauty! Amazing work!
Thanks man
Hello my friend,
Great design. It's a very good job. Unless you try out the innovations, you cannot learn something new. And you are always working to teach innovations. And you always produce innovative studies and ideas. Thank you for sharing. See you. greetings.
Thank you so much. Well said. Keep trying new things
@@KomarProject 👏👏👏👏
I love love love this table!! You're so creative!!
Awesome router table, I'm getting ready to build one for my shop and I'm really liking your take on the bit storage!
Thanks Robb! It’s super easy to make
Funny moments when you said RGB so I decided to give like & Sudscribe
One of your best projects and videos.
Thanks man. Really appreciate it
U should make this a business, build a lot of this router table and sell them ✌️
I just do it for the love of it. But thank you
Hi, I just completed a build of you very neat router table, excellent design. I used a JessEm lift and fence and new Bosch router, no LED's in router area, but a clear lexan door. Thanks again for the excellent design ideas. Brian, Ladysmith BC Canada
The cabinet is beautiful, I love that rustic look, in my opinion, a cast iron router table top would look better suited on it though, that white top looks too modern for the cabinet, but still, it looks awesome.
Extention wings are dope 💪👍😎
Thank you!!!
That looks awesome mate. Love the draw design. 👍
What a beautiful build I love it it’s just wow awesome job
Been waiting for this one to drop and you did not disappoint!! Amazing job, Bart!
Thanks so much Bryan!! Really appreciate it man
Thanks for your service !!
Thanks so much brother
Yup, the LEDs put it over the top. Well,,,actually,, it was the bomb before them. Great build !!
Lmao I know. I was wondering if I should keep them permanent but then I came to my senses lol
👍 awesome bro...
Just checked out your channel for the first time...well done! I can't wait to see more!
Thanks so much spencley!!
the reclaimed wood "veneer" is really cool.
Thanks so much
That looks amazing.
Thank man!
getting ready for bed, see there is a new video from Bart, bedtime delayed by 18 minutes and 10 seconds
Hahahahaha now that’s commitment !! Love you man!
@@KomarProject Right back at you. Hope you and your family are all safe and well
Yes yes I am extremely happy and excited to see this video Bart. Love watching your videos and learning. This project turned out very beautiful and most importantly cool. Bart hopefully very useful. Hopefully you get great use out of it. Love palit wood. Keep up the great craftsmanship and hard work my friend. Keep Making. God Bless.
Thanks Jared!! You are awesome man !!
Great job on the Sleeper, Bart!! I just built my with the same Rockler lift, fence and top. I really like what you did with the bit storage - I put in 3 sliding trays on the side but you're right, the slide/tracks take up valuable shelf with for bits. Nice work!
Thanks so much Mark!! Ya the lift is amazing. I love it
Super cool build. Dig it.
Thanks Garry!
Great build, Bart. Soon I will make something similar for my shop. Thanks for this inspiring video, buddy!
Can’t wait. I’m sure your going to come up with some awesome jugs for it
Amazing job!
Thanks so much
I like it! Great job!
Thanks AC
Love your style that pallet wood looks really cool 👍👍👍
Thanks Brian
If you were looking for an ugly veneer finish you nailed it.
Fisher sent me Great job
Well thank you so much to Drew. And thanks for checking it out
This is the first of your videos I have seen, and I subscribed as soon as it was done. Love your style, how you break it all down, and how do-able you make the project seem for newbies like me to try for themselves. Cheers.
Thanks Danny. Ya I try to make it as simple as possible. Welcome aboard
so very cool!!!! Great ideas!!!
Thanks so much Marla
Awesome man! I just may need to build something similar.... you’ve motivated me.
You should. I’m going to have plans for this down the road sometime but if you need something now I can send you my sketches with all the dimensions
Whoa!! Totally love the storage, Totally stealing your idea 👍👍
Now all I need is a router, a cnc, some bits and mahogany. Lots of mahogany. And maybe some walnut. A tablesaw wouldn't hurt either 😂😂
Hahaha. Go for it man. That’s why I make these videos, to give people a idea of what they can do. I’m also going to be coming out with plans
@@KomarProject Awesome 👍😀
Awesome build mate.
Thanks so much Andy !
Once you hear Ryan Reynolds, you can’t unhear it 😂 Great build man 👍
Congratz, you did a fantastic job... Sadly, not all of us have the means to purchase these God-for-bid router lifts. Cause I'd love to have one. Believe me. But not finding anything under 400$ is really an unfair deal for such a part. Being unreachable for people on a lower budget. Companies could create some just made a bit cheaper, that lack some options and things like that, but still do the job well, but just cheaper to help lower budget people. My opinion to all the companies out there!
But the router station itselft is very nice, I like your rustic look on it (which is me all the way) you did the same thing as I did on mine with the folding ends which are really a great advantage to have when you have larger pieces to work with. I loved your idea for the pivoting draws. I might try it on my new router table if you don't mind me stealing one of your ideas?.
Well, all this to say! You did a beautiful job. The only thing I would've done differently, as I did on mine, is Instead of the 2 draws at the bottom, I would've set at least three. Two, one over the other on own side and one large one for routers, miter gauges etc. But aside from that. A PERFECT BUILD. Plus I love the branding on your P-glass door. Beautiful. Congratulations!
Excellent build. Good to see one with dado fittings instead of pocket screws. Where can I find that 4"x2" dust collection fitting with the built in flange?
Thanks for posting that reclaimed wood look looks fantastic I like it alot. I built mine but I was wondering if maybe my router is too far away from the back of my table. ( 7 inches from lift device to back of table. )Could you tell me minimum distance on yours? I also use a 2 1/2 inch dust port lots of suction and volume. also I was wondering why you decided to put holes in the back instead of holes in the front for good air flow. Thanks in advance for your help. , Phil
Nice build. We did similar methods for the narrow drawers but I did magnets instead to make the trays removable
Thanks man. I was actually thinking of magnets to close the side drawers but in the end it closed ok. Thanks brother
Omg loved this , great build , and led's are always needed to finish a job 😂
hahaha LED lol
Great build. I will building a similar project soon and I have made some modifications to my design based on some of your ideas. So that was cool to see. A minor tip on something I got burned on several times, try not to use the flat portion of the base of the router when making cuts against an edge. If you're off for just a moment and it comes away from the edge, your cut isn't clean. If you keep it on the round part of the base, this isn't an issue. Did that on big piece of walnut and it cost me. I really do like your table. Good job.
Thanks! Good luck on your project!
Great looking router table Bart!! I have the same lift. I love it, but the snap-ring inserts don’t “POP” out anymore. Lemme know if you end up having this problem too.
Really? Maybe there is a spring that got stuck. I would call Rockler I’m sure they will replace it for you
This video popped up today, and the first I have seen from you. Great style, love the pallets idea, and the swinging bits drawers. That sounded rude...anyway. lots of bits to learn from this, and I am now subscribed. Not sure why I have not seen you before now.
Great style...and loved the led outtake at the end.... but why not led's! ; )
PS
Are the plans available? Happy to pay but the link went nowhere.
If I may ask, what are the final dimensions of the cabinet? I’m interested in creating something similar for my Incra 27x43 offset top
Nice!
So, it's been a year. Have you seen any rust on the shanks from sitting in wooden holders? That would be my concern, but my shop has no heat or air conditioning.
You know I never though of it but I just ran to look. And we are good. No rust. I think the finish sealed it up a bit because it was sprayed and some of it got into the holes. Good thinking though
Hi very ingenious and very good job...and what about plans ?Do you share them ? thank's a lot
Philip
Coming soon brother
Watches video...likes video...goes to post comment and realizes they don't own a single router tool or bit...watches video again 😂 Great build!
Hahaha that’s what I’m talking about. Lol. That’s commitment lol
How can I purchase plans for this gorgeous work of art? I can't seem to open your website store.
Ohh I just tried opening it too and for some reason it’s not working. Let me call the website company today and I’ll get back to you. Weird. Sorry this happened and thanks for letting me know.
Ok thanks. 👍🏾
Great video buddy 👍 ( just question are you czech?😅)
No I’m polish
I wish a tool manufacturer would help me out with just a few tools i lost during the time i was getting put on disability because i had to sell to pay bills the 2 years to get approved and now i can't afford to get them back. I can do little bit of stuff before i start hurting each day and that would help keep my mind busy. I've been on disability for 2 years after working in construction for 34 years so I'm still struggling
As an update.... the extension brackets are $32 on Amazon as of January 2024
ს უ პ ე რ ...... S U P E R .....
Plans??
Coming very soon
Did you say matematika? 😂
I did lol
SHLM & HaB (peace & love). The Name of the Creator is Hayah asher Hayah, as what He told Mose (Exodus 3:14), preserved in the Hebrew Scriptures. There is a curse to the G-o-d name (Isaiah 65:11-12), preserved in the Hebrew Scriptures. All followers of the Messiah are to do the 7 appointed times (Leviticus 23), but no more animal sacrifices, following the Crucifixion of the Messiah. We are now of the order of MLK TSDQ (King, righteous), to Whom ABRaHM tithed. Ask the Messiah to be your personal Savior. He is the Atoning Offering for mankind for the remission of sin ( 1 John 2:1-2). He said to him, I am the way, the truth and the life. No one comes to the Father except through me (John 14:6). If you believe the Messiah died on the cross, & Resurrected three days later (presenting Himself as First Fruits to the Father), please ask Him to be your Savior. He is the ONLY way to Everlasting Life.
Be careful with your hands 😭😭