Had a razor sharp mdf system, gave up on regritting the mdf wheel, made an 8" plywood wheel, glued on 240 grit emery sandpaper, just like this lasting over 50 sharpening and still going without any signs of failing!!!!
Super. You addressed the all import aspect of holding the angle. So many show the wheels, which is fine, but do nothing to get the proper angle and hold it. Great job. Just thinking that in lieu of a clamp on the rod to hold the knife a neodymium magnet might work?
On the design of the original razor edge system they used wax to prevent the grit from being too abrasive on the blade (eating away faster than desired)
Having declared my dissatisfaction with this sharpener last night czcams.com/users/postUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ I thought about the problem some more. It occurred to me that I might be undoing each attempt at achieving a sharp edge by the repeated attempts. So, I tried to clean up the unsatisfactory result by honing with only positions 3 and 4.Miracle!! A really nicely sharpened chef's knife, more than enough to handle my needs. Admittedly, it did not reach professionally sharpened razor-fineness, but it is now significantly sharper than it was. A bout of breaking down carrots convinced me. So, major apologies to the manufacturer, Amazon, and all happy and potential owners! Follow the directions: don't buy it if you have ceramic blades; and don't overwork your knife blade.
Will try your sandpaper method!! I've got the razor sharp wheels, work great for about 5 knives, then need regritting. Trying different glues, anyone having grit retention problems/ fixes? Razor sharp says should be able to do 100 knives......
Huge amount of detail, but no overview, and hard to follow. Have to give 1/5 Try getting narrators to talk for you: interesting, informative. Good luck
Меня всё видео волновал вопрос - а чо бы не купить просто круг с мелким зерном (есть с весьма мелким, вплоть до полировки, держу в курсе) и второй круг - с ещё мелким или вообще полировальный. Подручник сделал - хорошо. Но вся эта возня с кругами - непонятна.
I put a diamond disc over the grinding wheel and mounted the bench grinder sideways so the disc is horizontal. A slope gives me 25 degrees for the chisel or plane iron. Not good health and safety but it is cheap and works.
Why don't you remove the motor from the base then reattach after rotating the motor 180 degrees. This way you can have the switch in front of you. there are several videos on CZcams
@WungusBill sorry Wungus but I suggest you look at the following video and see what many of us have done. you do not need to reach over the grinder and you don't need to walk around the table to get to the switch. My grinder which I use daily has has the switch right in front of me and the the wheel turning away from me. czcams.com/video/isWzcFBlNmU/video.html
I love it when people love what they're doing, BUT......I think it was a serious mistake to glue the sandpaper to the wheel. It will wear out and then what? A whole better way to do it all for quick and cheap is to get a $50 belt sander at Harbor Freight and use different grit belts that are cheap, easy to change, and can sharpen anything from a mower blade to an axe, to a pair of scissors, to any knife, literally in seconds. I applaud what you did, but there is a much easier way.
He could simply grind away that worn paper and apply new. The commercial "Razor Sharp Edgemaking" tool actually using a grit that is glued to the wheel, so when it wears out you simply remove it (gently grind it off then sand smooth, apply glue, and reapply new grit). You can purchase a jar of this grit (enough for dozens of applications) at Woodcraft (search for Razor Sharp Edgemaking RazorSharp Jar of Grit). They also sell the rouge (buff wheel) and wax (grit wheel).
The sound of the knife cutting through the paper sounds as if it was cutting against 100 grit sandpaper/ meaning sharpness doesn't equal smooth cutting or durability? HOMEMADE!! Yup/ In A machine shop, at home.
@@binnsbrian not interested in this machine or technique/ go to China and you will find out this type of work is terms for firing an employee. Yes CHINA/
Oh! I forgot this , machine or type is approximately 10% of this machines asking price. For great reason/ it cost virtually nothing to make. Again this is nothing to do with correct sharpening of quality shears/ No THANKS!
Had a razor sharp mdf system, gave up on regritting the mdf wheel, made an 8" plywood wheel, glued on 240 grit emery sandpaper, just like this lasting over 50 sharpening and still going without any signs of failing!!!!
Brilliant idea for beginners in regards to the angle device. Great job!
Great job! I saw on a commercial unit angle markings for height of blade for a given angle of sharpening. Great that your rest is adjustable!
Super. You addressed the all import aspect of holding the angle. So many show the wheels, which is fine, but do nothing to get the proper angle and hold it. Great job. Just thinking that in lieu of a clamp on the rod to hold the knife a neodymium magnet might work?
Best I have seen yet. Good job dude.
Clearly this system works, and requires less eye-hand coordination than using progressively finer grits on a 2x72.
Simple and perfect
What kind of board are you using? Thank you
Very cool idea
O wiele za szybkie obroty i nie chłodzone płynem. Lipa.
Can I order the jig?
How much does it cost?
Very nice! Why did you coat the sand paper with the wax? Is that so the metal filings won't stick to it and that way it will last longer?
On the design of the original razor edge system they used wax to prevent the grit from being too abrasive on the blade (eating away faster than desired)
Think this was polishing compaund.
i saw in another video that bee wax is for cooling, who knows, maybe for both cooling and aggressiveness reduction...
amazing
Having declared my dissatisfaction with this sharpener last night czcams.com/users/postUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ I thought about the problem some more. It occurred to me that I might be undoing each attempt at achieving a sharp edge by the repeated attempts. So, I tried to clean up the unsatisfactory result by honing with only positions 3 and 4.Miracle!! A really nicely sharpened chef's knife, more than enough to handle my needs. Admittedly, it did not reach professionally sharpened razor-fineness, but it is now significantly sharper than it was. A bout of breaking down carrots convinced me. So, major apologies to the manufacturer, Amazon, and all happy and potential owners! Follow the directions: don't buy it if you have ceramic blades; and don't overwork your knife blade.
А что за материал , из которого сделаны круги МДФ или фанера .?Лента что приклеили на круг на стыковке не отвалится и зачем запилы на соседнем круге ?
The cuts are for cooling
WTF !!! One man came up with the idea and implemented it. Then there were 1000 copy cats !!!
Will try your sandpaper method!!
I've got the razor sharp wheels, work great for about 5 knives, then need regritting.
Trying different glues, anyone having grit retention problems/ fixes? Razor sharp says should be able to do 100 knives......
Same here, grit lasted about 2 knives, just mixed lots of grit with the glue, so far lasting over 5 knives
Is there a commercial jig like this for sale anywhere?
Look for "Tormek"
Parabéns
Mission Kitna padta hai bhai rate location
Huge amount of detail, but no overview, and hard to follow. Have to give 1/5
Try getting narrators to talk for you: interesting, informative. Good luck
BTW, I've seen great results just using raw mdf wheels, or that with compound...worth thinking about. Get a finer finish than with sandpaper
Видео конечно блеск!!!! Ведь у каждого есть токарный станок и.т.д!!!
Всё тоже самое можно сделать без токарного станка. Лишь руки росли не из...
Меня всё видео волновал вопрос - а чо бы не купить просто круг с мелким зерном (есть с весьма мелким, вплоть до полировки, держу в курсе) и второй круг - с ещё мелким или вообще полировальный. Подручник сделал - хорошо. Но вся эта возня с кругами - непонятна.
16 min vid to sharpen a blade. takes me 5 min max
I put a diamond disc over the grinding wheel and mounted the bench grinder sideways so the disc is horizontal. A slope gives me 25 degrees for the chisel or plane iron. Not good health and safety but it is cheap and works.
احسنت
yeah. just to much work. easier ways
You have to use polishing paste with polishing pad.its effective more than wood
Why don't you remove the motor from the base then reattach after rotating the motor 180 degrees. This way you can have the switch in front of you. there are several videos on CZcams
@WungusBill sorry Wungus but I suggest you look at the following video and see what many of us have done. you do not need to reach over the grinder and you don't need to walk around the table to get to the switch. My grinder which I use daily has has the switch right in front of me and the the wheel turning away from me. czcams.com/video/isWzcFBlNmU/video.html
I love it when people love what they're doing, BUT......I think it was a serious mistake to glue the sandpaper to the wheel. It will wear out and then what? A whole better way to do it all for quick and cheap is to get a $50 belt sander at Harbor Freight and use different grit belts that are cheap, easy to change, and can sharpen anything from a mower blade to an axe, to a pair of scissors, to any knife, literally in seconds. I applaud what you did, but there is a much easier way.
Hello, the scythe blade should not be sharpened with tape, but with a hammer.
He could simply grind away that worn paper and apply new. The commercial "Razor Sharp Edgemaking" tool actually using a grit that is glued to the wheel, so when it wears out you simply remove it (gently grind it off then sand smooth, apply glue, and reapply new grit). You can purchase a jar of this grit (enough for dozens of applications) at Woodcraft (search for Razor Sharp Edgemaking RazorSharp Jar of Grit). They also sell the rouge (buff wheel) and wax (grit wheel).
Not everyone has a lathe
но нож всё равно тупой
The sound of the knife cutting through the paper sounds as if it was cutting against 100 grit sandpaper/ meaning sharpness doesn't equal smooth cutting or durability?
HOMEMADE!! Yup/ In A machine shop, at home.
Send me the link to the one you built.
@@binnsbrian not interested in this machine or technique/ go to China and you will find out this type of work is terms for firing an employee. Yes CHINA/
Oh! I forgot this , machine or type is approximately 10% of this machines asking price. For great reason/ it cost virtually nothing to make. Again this is nothing to do with correct sharpening of quality shears/ No THANKS!
who the hell has all this much Machenry at there home?
Devi fare scorrere non girare la lama , ti cambia l'angolo di affilatura.