I had a JB Case and had to depart with it as I needed more storage. I ended up choosing the Urbain 3x5 because I liked the pocket cofiguration but automatically ordered the JB Interior for it. I can't wait to get it installed and still have the protection I have grown to love.
Bought and installed in less than an hour. The new insert was pretty nice. Had to do some pulling to get enough fabric pulled over to tape it to the tube. I think the newer cases have a longer tube then what was shown in the vid. I had only 1.5 inches of fabric at either side of the tube. Time will tell if the tape will hold as I pull cues in and out repeatedly over time. I am happy otherwise. I’m still getting used to the idea of not having individual tubes separating the sticks though.
The cavities are not tapered so there is no correct way to insert the cues. The vast majority of players insert the butts bumper down and shafts tip down.
If you send me one I will be happy to review it. I have seen one casually in the pool room and wasn't impressed with the interior. But until I have one to dissect I can't really comment on the interior construction and protectiveness.
@@jbcasesoriginal I have already purchased and down this swap. Makes the case better but I still went back to my JB Need something with backpack straps
Predator is junk... the ONLY thing they make that is worth anything is cue shafts. The only other good products they have are made by someone else (like Jacoby or Sang Lee or Aramith), and they get the maker to add a Predator logo to it.
When players are sponsored at that level if a cue breaks they can be rushed a replacement if needed. So they aren't as concerned about it as someone who spent three months of savings to buy their dream cue.
If the interior is removable easily like the Urbain then yes. I don't have a roadline to inspect so I can't tell you what options are available and what effort it would take to change the interior.
The tape is part of the construction. Yes it's weak but using tape is a functional method of constructing cue cases. Doing it right is a choice that many "makers" don't make for whatever reason. ($$$)
No thanks John no desire to be part of a Mexican Mariachi Band, simple solution is to not buy a junk Pool Cue Case to protect your Cues. Easer to buy a good, or great case by JBCases that protects Pool Cues. Why spend good money on junk, unless you want crap Cue protection.🤥
I had a JB Case and had to depart with it as I needed more storage. I ended up choosing the Urbain 3x5 because I liked the pocket cofiguration but automatically ordered the JB Interior for it. I can't wait to get it installed and still have the protection I have grown to love.
Bought and installed in less than an hour. The new insert was pretty nice. Had to do some pulling to get enough fabric pulled over to tape it to the tube. I think the newer cases have a longer tube then what was shown in the vid. I had only 1.5 inches of fabric at either side of the tube. Time will tell if the tape will hold as I pull cues in and out repeatedly over time. I am happy otherwise. I’m still getting used to the idea of not having individual tubes separating the sticks though.
Use good double faced tape if you notice slippage. You should be ok though.
I've had one of these cases about 18 months now. But I've only noticed the rattling about a month ago.
I was thinking about getting one of them cases but not anymore I'll definitely be buying one of your cases in the new year at somepoint
I had one of these cases and that was the problem could hear them moving around my solution was to buy a jb lol
Looking forward for a Jflowers case insert too.
Really nice 😍 where i can buy that JB case interior?
mine dont rattle like that but i also put my cues in correctly. for your butt section the joint goes in first
That is nonsense. Then it only means your cues will rattle on the other end. I will do a video answer to this and prove it.
The cavities are not tapered so there is no correct way to insert the cues. The vast majority of players insert the butts bumper down and shafts tip down.
can you review the cuetec pro line hard case?
If you send me one I will be happy to review it. I have seen one casually in the pool room and wasn't impressed with the interior. But until I have one to dissect I can't really comment on the interior construction and protectiveness.
Predator case hacks :D
Do you have a distributor of jb case inserts in the philippines..?
Will this work on the 2x4 Urbain case? Can we fit the 3x6 into it?
Yeah any answer to this question
Does the 2x4 case rattle like he demonstrates the 3x5 does? I was looking at buying one.
Yes if the the interior is removable as shown then it can be replaced.
The interior of the Urbain cases I have, 2x4 and 3x5 both rattle just as shown in the video.
@@jbcasesoriginal I have already purchased and down this swap. Makes the case better but I still went back to my JB Need something with backpack straps
What’s the cost of the 2x4 insert
Too bad these great cases/accessories are not available in Germany. 😕
Shame on Predator for peddling those cases. Additionally, Albin Ouschan has a signature Urbain case and he should be much more protective of his name.
Predator is junk... the ONLY thing they make that is worth anything is cue shafts. The only other good products they have are made by someone else (like Jacoby or Sang Lee or Aramith), and they get the maker to add a Predator logo to it.
When players are sponsored at that level if a cue breaks they can be rushed a replacement if needed. So they aren't as concerned about it as someone who spent three months of savings to buy their dream cue.
is it true that the depth of the urban like this?
It is 100% true for the Urbain cases that I own.
Hi , do you sell one to fit the 2x4 urbaine predator case? Thanks
Luke
Yes you can choose size when you order.
@@jbcasesoriginal please tell me what size fits inside the predator urbaine 2x4 case?
Do you have replacement interiors for a 2x4 instroke?
I have a Predator roadline case 2 butts four shafts. Can I order custom interior??
If the interior is removable easily like the Urbain then yes. I don't have a roadline to inspect so I can't tell you what options are available and what effort it would take to change the interior.
I can't believe the the tube is just taped together like that. WOW! That sucks. That case is almost $200, not that cheap.
The tape is part of the construction. Yes it's weak but using tape is a functional method of constructing cue cases. Doing it right is a choice that many "makers" don't make for whatever reason. ($$$)
Good day.. I'm here in saudi arabia.. How can I order a JB case?? Thanks..
Just like any other website, order and follow the directions.
A sane pool player won’t jiggle his/her cue case with cues inside.
Man i want this for my urbain case, but im in indonesia..
We ship to Indonesia.
No thanks John no desire to be part of a Mexican Mariachi Band, simple solution is to not buy a junk Pool Cue Case to protect your Cues.
Easer to buy a good, or great case by JBCases that protects Pool Cues.
Why spend good money on junk, unless you want crap Cue protection.🤥
2 layers of tape! The predator difference!!🤣🤡