29 GALLON AIR COMPRESSOR 240 Volt, yes I have this compressor. On the motor there is wiring diagram to change over to 240 V. This compressor has an hour meter below the motor, mounted on the frame. One upgrade you will want to do is to add an oil drain tube off to the side. This way you can drain the oil into a container 🫙 rather than all over the compressor and on the floor. When changing the oil after break in , I used a piece of PVC pipe to get as much oil into a container.
I dropped $525 there on the first day of the sale. I was waiting for the 4375 generator to go on sale for $100 off. $379, solid price for a pretty well powered unit I think.
I had a $25 off in the mail, so I took advantage of the sale. For $225 I got the ultra torque, 5ah and charger with a free 8ah battery. That’s better than the complete kit I saw Den of Tools talk about recently.
They showed the $159.99 compressor on the sign so i would say yes. Did you know a Dewalt battery will work on a Hercules cordless tool? If you look at the Dewalt battery you will see a little tab about halfway between the back and front of the battery, remove that tab and the battery will fit both Dewalt and Hercules tools. I bought a 22' Wagner ladder 300 lb. capacity for $95.00 black Friday at the orange store. on the table saw Blade is not included.
They fit on the tools, but unfortunately they flipped the positive and neutral's in the battery's and tools so that they're not inversely compatible. It'd be awesome to just buy herc batts to use all these dewalt tools I got but no dice sadly.
@@chrishayden7016 it's even easier to just take them apart and replace the 18650 batteries in them to make them fresh again. They originally use samsung 25r's which aren't too expensive, but you can always go to higher grade batteries like the 30r's or some different brand like Sony's. I get my batts for vaping and the dewalt stuff at imr batteries. Great site, super reliable for over a decade to me. CZcams will have a bunch of videos on swapping the internals for ya, hope I help bring some more life into ya tools homie 💪
@@chrishayden7016 Yes take the screws on the bottom out and switch the 2 outer prongs #1 and #4 then reassemble and the harbor freight batteries should charge.
After last two items went to shit. Son took back a paint kit that was broken out of the box they charged him 20% restocking fee because he didn't take another one. I have a $260 hyd cart or table lift that the release lever handle broke they don't offer any part replacements for the cart. Im out $260 for a cart that doesn't work. Never go back finding item at no different in cost but with 1 year or more warranty, not the 90 days.
The 1 near me looks nothing like this its maybe a quarter of the size with a tenth of the stuff this store has and its just nicer displays layouts mines looks thrown together with the cheapest way possible
@alexanderrichards8639 you are correct I did. I actually fixed the blue impact too took it apart and switched the wires on the motor, works properly now. Just haven't had a chance to do the video been working alot still gonna try though
My experience with Harbor Freight: they sell some decent product at great prices, but the more moving parts there are, the more likely they are to break. So for things like miter saws and generators, I'll stick with the name brands. I'd even trust Ryobi more than Chicago for power tools.
I 100% disagree with the rolling toolbox assessment. Until HF puts locks on the drawers, they are junk. If you are on an incline where the drawer side is downhill they can come open and the whole box can tip if you have heavy tools in the drawers. Then at the very least you have a mess and at worst an injury.
All CZcamsrs do this. You’ll see the content creators with a modest amount of comments looking at them and commenting as you see above. But I’ll assure you, most never read them and couldn’t care less what their viewers think. It’s about feeding the CZcams Algorithm to show people engage. Like this. He makes more money. No mystery.
Dont buy bauer cordless tools wont make that mistake ever again the cordless jig saw didnt last 10 minutes before the front rivit broke that holds the blade on tne corded one it doesn't have a rivit there and it last the cordless is just tne drill and hammer drill junk buned out
@megaman010391 my impact drill still works just smells like burnt rubber and plastic never had punishing work either I went to flex tools definitely not going back . Looks like you had the same issue with there joke of a cordless jig saw lol lasted 2 cuts before that guide rivit broke of they would of just made it the same way they made the corded 1 they would of been good they half awful and I mean awful Q,I checks if they would implement a Quality checks once in a while. They probably helped them out a little bit. I'm definitely never going back the good. We have no money though that's why I bought mine. I'd better go to the money when I bought mine
I had mine for 2 years did tons of projects on them, I literally put my hood from my 1965 impala on a set of these to sand, Prime, and paint it and that's heavy
This is total B.S. Many of the items listed as - On Sale - are actually higher than they were just one sale ago. The 10x17 garage last sale for $179, this sale $189
![tattoo printer tutorial[제품단순선물]](http://i.ytimg.com/vi/g40_GwEJak0/mqdefault.jpg)
I just bought the ultra quiet. So far so good! Replaces a 30 year old craftsman that was so loud it drove me nuts!
I got a big 60 gallon from menards years ago it's so loud and takes up to much space now really looking to pick up one of these smaller quiet ones
29 GALLON AIR COMPRESSOR
240 Volt, yes I have this compressor. On the motor there is wiring diagram to change over to 240 V. This compressor has an hour meter below the motor, mounted on the frame. One upgrade you will want to do is to add an oil drain tube off to the side. This way you can drain the oil into a container 🫙 rather than all over the compressor and on the floor. When changing the oil after break in , I used a piece of PVC pipe to get as much oil into a container.
Good info 👍
Howdy Chuck , I really appreciate your videos Thanks
Hey Dan I'm glad you enjoy them thanks for the comment!
They got me with this sale, I picked up the Titanium Unlimited 140 and the Predator 2000w inverter generator.
Those are some nice items to have!
That Daytona jack is the only one that comes with a 3-year warranty. The rest have a only 90-day warranty.
Great jack and an Awesome warranty!
Picked up 4 of the icon shop stools for work. Got there as they opened.
Crap, I hope you left me one.
nice 👍
I dropped $525 there on the first day of the sale. I was waiting for the 4375 generator to go on sale for $100 off. $379, solid price for a pretty well powered unit I think.
I agree
I bought mine from the bargain/return table, I love it, runs the titanium 125 😂
@@CrazySchultz17 Nice!
Great video😊
Thanks!
buy the warrior angle grinder for $10 and get the 2yr extended warranty for $3 and just exchange it before the 2yr point..
I"ve had those grinders for years used daily. Never a problem that I can remember. Don"t be a looser.
Good video; my first view of your channel.
Glad you enjoyed it. stick around I do a lot of these videos!
I had a $25 off in the mail, so I took advantage of the sale. For $225 I got the ultra torque, 5ah and charger with a free 8ah battery. That’s better than the complete kit I saw Den of Tools talk about recently.
that ultra torque is nice!
I bought a Predator generator 5 years ago and its every bit as good as a Honda....excellent price and you cant go wrong
my buddy bought one years ago and though he hasn't used it a lot he loves it
Thanks 👍🏽
👍
Sounds like some realy good deals
I agree!
@5:40 - Can you paint inside with that sprayer? Or is it only meant for outside? Like can you paint a bed room with it?
Get there electric one
@@therealbigfoot3076 That is good for inside paint jobs?
They showed the $159.99 compressor on the sign so i would say yes. Did you know a Dewalt battery will work on a Hercules cordless tool? If you look at the Dewalt battery you will see a little tab about halfway between the back and front of the battery, remove that tab and the battery will fit both Dewalt and Hercules tools. I bought a 22' Wagner ladder 300 lb. capacity for $95.00 black Friday at the orange store. on the table saw Blade is not included.
did not know that about the dewalt batteries. thanks 👍
They fit on the tools, but unfortunately they flipped the positive and neutral's in the battery's and tools so that they're not inversely compatible. It'd be awesome to just buy herc batts to use all these dewalt tools I got but no dice sadly.
Can the DeWalt charger be reversed? I have4 DeWalt batteries that no longer take a charge.
@@chrishayden7016 it's even easier to just take them apart and replace the 18650 batteries in them to make them fresh again. They originally use samsung 25r's which aren't too expensive, but you can always go to higher grade batteries like the 30r's or some different brand like Sony's. I get my batts for vaping and the dewalt stuff at imr batteries. Great site, super reliable for over a decade to me. CZcams will have a bunch of videos on swapping the internals for ya, hope I help bring some more life into ya tools homie 💪
@@chrishayden7016 Yes take the screws on the bottom out and switch the 2 outer prongs #1 and #4 then reassemble and the harbor freight batteries should charge.
After last two items went to shit. Son took back a paint kit that was broken out of the box they charged him 20% restocking fee because he didn't take another one. I have a $260 hyd cart or table lift that the release lever handle broke they don't offer any part replacements for the cart. Im out $260 for a cart that doesn't work. Never go back finding item at no different in cost but with 1 year or more warranty, not the 90 days.
how do you break a handle? Sounds like misuse.
@@jeepgirl1653 misuse right you can stay with them and support china
The 1 near me looks nothing like this its maybe a quarter of the size with a tenth of the stuff this store has and its just nicer displays layouts mines looks thrown together with the cheapest way possible
I really want the BadLands 12k winch.
Yea it's nice I got the smaller 3500 on my atv I love it
When are you going to post the temu impact wrench video???
Wrong channel, dude...😮😮
@ToyManFlyer1100 No, he made a video. Unboxing impact wrench from temu and he said that he will test them
@alexanderrichards8639 you are correct I did. I actually fixed the blue impact too took it apart and switched the wires on the motor, works properly now. Just haven't had a chance to do the video been working alot still gonna try though
My experience with Harbor Freight: they sell some decent product at great prices, but the more moving parts there are, the more likely they are to break. So for things like miter saws and generators, I'll stick with the name brands. I'd even trust Ryobi more than Chicago for power tools.
I agree the Chicago brand is the tool for a project here and there. Someone that isn't going g to use it much and doesn't want to spend a lot
I 100% disagree with the rolling toolbox assessment. Until HF puts locks on the drawers, they are junk. If you are on an incline where the drawer side is downhill they can come open and the whole box can tip if you have heavy tools in the drawers. Then at the very least you have a mess and at worst an injury.
I didn’t see any Icon tools
Anyone habe the Bauer pressure washer?
Recently shipment of openbox and refurbished products?
To *every* store? Nah, it's "tax day".
Anyone have the ultra quiet compressor? Is it really quieter? Mine sounds like a bomb..a continuous…bomb 😂
I have the small Fortress quiet compressor & it is a lot quieter than a normal compressor.
They used to have good prices for tools you only use once in a while. Now you can buy name brand tools for the same price.
Hey Chuck
hey bud
@@AllThingsCool how are you
Try ordering parts for anything you buy there.
warranty is always a good thing to get with your product at least for the short term you will be protected
Wouldn't it be easier to ask a associate at the store to get info on the free tool vs the comments? 😂
Love to engage with the community. Love hearing feedback from everyone and hearing what they have to say
All CZcamsrs do this. You’ll see the content creators with a modest amount of comments looking at them and commenting as you see above. But I’ll assure you, most never read them and couldn’t care less what their viewers think. It’s about feeding the CZcams Algorithm to show people engage. Like this. He makes more money. No mystery.
A for cheap good place for cheap hands tools Who does A couple of decent other things not much that will last
Dont buy bauer cordless tools wont make that mistake ever again the cordless jig saw didnt last 10 minutes before the front rivit broke that holds the blade on tne corded one it doesn't have a rivit there and it last the cordless is just tne drill and hammer drill junk buned out
Yea that's not good 😐
The jig saw sucks. The impact drills are decent. Ive have a 1/4 hex for about 3 years, still running strong.
@megaman010391 my impact drill still works just smells like burnt rubber and plastic never had punishing work either I went to flex tools definitely not going back . Looks like you had the same issue with there joke of a cordless jig saw lol lasted 2 cuts before that guide rivit broke of they would of just made it the same way they made the corded 1 they would of been good they half awful and I mean awful Q,I checks if they would implement a Quality checks once in a while. They probably helped them out a little bit. I'm definitely never going back the good. We have no money though that's why I bought mine. I'd better go to the money when I bought mine
Boy! That is one long sentence.
@@richbenoit1840 lol
THIS PLACE DELL MOSTLY JUNK !!!!!!!!!!!!!!!!
Those cheaper saw horses aren't worth the money. The first time I set a sheet of plywood on them, they both broke.
I had mine for 2 years did tons of projects on them, I literally put my hood from my 1965 impala on a set of these to sand, Prime, and paint it and that's heavy
This is total B.S.
Many of the items listed as - On Sale - are actually higher than they were just one sale ago.
The 10x17 garage last sale for $179, this sale $189
last sale as in parking lot sale? Cause that's usually the best sale they run but only happens a couple times a year usually
I thought harborfreight was selling women when you said wench and didn't say winch. It's like saying win with a ch on the end. Stop exciting me
lmao