Dyson DC17 Brushbar and Filter Replacement
Vložit
- čas přidán 27. 07. 2024
- This video shows you how to replace the brushbar, belt, and filters in a Dyson DC17 upright vacuum. The process should be similar for other Dyson uprights.
Parts Required:
DY-911961-01 Dyson DC17 Brushbar Assembly
DY-911710-02 Dyson Belt
DY-911235-01 Dyson HEPA Post Filter
DY-911236-01 Dyson DC17 Pre-Filter Assembly
I purchased the parts from Parts Warehouse www.partswarehouse.com/ and was pleased with their service.
Thanks Ron. I've watched other videos that show how to disassemble the cyclone ( I definitely needed that) but every time a video addressed the HEPA filter they glossed over it without even showing how it's done. You've done us a great service filling in that gap.
Awesome tutorial! Thank you. Now I realize I need to replace my brush bar and belt, in addition to the filters. 😀
Thanks Ron...this was very informative...you show just how easy it is to replace these parts... and probably save yourself a ton of money in repair costs. Thanks for the awesome instruction!
This was very helpful. Thanks for helping out this anonymous online stranger. 😊
Thank you for sharing this wonderful teaching video! I'm very happy to have learned that there is a second filter, I will check it!
Yes, a video to replace brush bar motor is absolutely desired. Thank you!!!
Great video with good detail. My only question is regarding the belt you ordered. From my research, I found there are two different belts available for the DC17. The one you used (part #911710-02) is 8mm and is for the DC17 with a clutch. The one we use (part #911710-01) is 10mm and is for the non-clutch DC17. Our DC17 is identical to yours. If your DC17 is for all floor types, then it is non-clutched. If it is for carpets only, then it is the clutch version.
Before replacing the belt, I have found that I needed to use a tweezers or needle nose pliers to clean out hair that has gathered on that shaft.
very helpful!
Thank You! My vacuum works so much better now!! Have you worked on the Dyson cordless V7? My shuts off after a 10-30 secs even on a full charge. Typically when using max suction.
maybe try a new battery?...
@@jordng8294 yes, DONE ! I got the battery replaced right before the warranty expired. Thanks!!
@@kellyandtimclay6476 you are very welcome, happy to help!
My Dyson DC17 animal has a side filter but does not need screws. Might be same model but maybe made 1 or 2 years after this model and the side filter also is a tad bit smaller I think.
Thank you
this was very helpful. Now I know why my vacuum is so loud. I need to maintain it. or take it somewhere
Good video, can you do a video showing how to access the brushroll motor please? Not sure how to do that. Thanks
+Parwaz seveneightsix Officiial Thanks for the feedback Parwaz. Sure, I'd be glad to do a followup video. How is it that you need to access the motor? If it is just to replace the belt, then I can do a closeup showing how to replace the belt. If it is to replace the motor, then that is a different, and more complex job. I want to make sure that I am providing the information you are looking for. Best Regards, Ron
+Ron Garrison A video on replacing the brushroll motor please, thank you :)
i almost threw away that hepa filter ddnt kno where it went! tnx
so what was the result with the 2 different part numbers (911710-01) and (911710-02) for Dyson Belt???
I don’t see the site for your replacement parts you speak of. Can you send again.
lol, you scared me.. I was thinking "Oh god, unplug the vaccum!" lol
Where did you get replacement parts
Amazon
What company
Dyson