No idea how this channel came up, but this is an awesome flat fender. Sucks this poor guy passed away too early. Glad his wife is honoring her husband and keeping the Jeep for his son’s. That’s really cool. Every time the go wheeling they will think of their dad and everytime someone like me is looking at the Jeep and saying how cool it is, they will talk about their dad.
I have Just acquired a 48 Willy's Flat fender. The last time I had one was back on the farm over 40 years ago, as teenagers my friend Don and I spent a winter weekend freezing out collective balls off digging it out of the barn, collecting parts, pissing on electric fences, rebuilding the motor, lubing it up, slapping some gas in the tank then taking it out for a test drive and beating the brakes off it. Rinse/Wash Repeat. To say that those were the days would be the understatement of the century. Now I have one again. Total travesty but she is mine. Brings back the air of Old school simple stupid. But also tells you that how small the normal person was back in the 40’s & 50’s. and how small we were as teenagers. When held to current stats, seating /comfort was an afterthought. “It’s tight” is the understatement of the day. (Future modification will be to cut the fender and push the seat back to a more comfortable position.) 4 Cylinder Original shit (Points & condenser. That at current have been shot out burnt out or just F.U.B.A.R. for faulty wiring and not rocking any Spark. They will most likely be replaced with new wiring job and electronic Ignition.) to get my project started I rolled my ass to the parts store and purchased a new battery for the project and arced the starter just to hear the engine make the noise and see if it would actually turn over and do what engines do, somehow I found myself on the receiving end of a overzealous of a nice shot of hot juicy oil across my grill and smiling like a Porn star on the receiving end. F&^Cked up, I know. But sometimes Progress means getting dirty. I Looked like the pivot man in a bukkake video and my friends of course got a good chuckle out of it. It would seem that some unknown person disconnected the Oil Pressure sending unit, Line and gauge and just left that bottom part in the block which was positioned at the correct trajectory that provided me with that fun filled flat fender facial experience. Once I get the wiring correct. Then its time to work on the seating. Being 6'4" rocking about 300 lbs. of built for comfort, not speed the seating is a little tight to say the least. I like how this rig is set up. Especially the Roll Bar. As you noted Room is not one of the attributes of this rig so the roll cage and roof rack are looking good. So that may be plagiarized in the near future. I will also look into the replacement of the steering column with a wonderful tilt O Matic and looking at the pedal positioning I can foresee future adjustments with the pedals . Thanks for sharing
Very good jub ❤❤❤,”God bless you. I have another here in Dominican Republic 🇩🇴 ( use to have another ones, but somebody owner it. It was a ford 1964,war ;but now I only have another like this jeep.
Outstanding resto mod. My dream Jeep. I suppose to get what you want you substitute goal for dream and start planning. I hope I can find someone to do this good a job when I put mine together, Thanks for posting this.
My hot rod 'Flattie' (titled as '46) runs a Buick 225 'Odd Fire' with Kenne Bell intake and internals, MSD, too much carb, fat headers, 4 speed, Warn overdrive... .
the tub has shovel slots so its military, and on the drivers side so its an MB. the windshield looks like a cj3 but its a military m38 since the center vent is bolted shut
Fantástico ! Como me gustaría tener uno y con el v - 6 con el que se fabricaron los últimos , una joya de la marca , hoy deben ser tesoros valiosisimos de colección! JEEP , # 1.! 👍👍👏🇨🇷✌️
Love those full floater rears. But l sure do love seeing the hubs on the rear axle. Oh well. Nice tilt/tele. Mr Borreson had that in his 70’s Monte Carlo / a swivel seat. He looked like boss hog. Build is bad ass...
A fav new MC of mine is one that looks like it was built in the 40s. Someone should copy and market the 40s Jeep .. so simple.. thanks to effing regs, impossible.. don't forget your face mask. lol.. We're screwed.
Hmm... How about calling it what it is. A highly modified Jeep with a 1946 Willys body. That’s like calling Bigfoot ( the monster truck) a ford pickup. Is that a CJ3A windshield? Those were made from 1949-1953.... recessed headlights on a 46?
No idea how this channel came up, but this is an awesome flat fender. Sucks this poor guy passed away too early. Glad his wife is honoring her husband and keeping the Jeep for his son’s. That’s really cool. Every time the go wheeling they will think of their dad and everytime someone like me is looking at the Jeep and saying how cool it is, they will talk about their dad.
Love them old jeeps
My 46 Willys has dana 44 off set with a locker ,full floater and disc brake kit from Herm the overdrive guy.
I have Just acquired a 48 Willy's Flat fender. The last time I had one was back on the farm over 40 years ago, as teenagers my friend Don and I spent a winter weekend freezing out collective balls off digging it out of the barn, collecting parts, pissing on electric fences, rebuilding the motor, lubing it up, slapping some gas in the tank then taking it out for a test drive and beating the brakes off it. Rinse/Wash Repeat. To say that those were the days would be the understatement of the century. Now I have one again. Total travesty but she is mine. Brings back the air of Old school simple stupid. But also tells you that how small the normal person was back in the 40’s & 50’s. and how small we were as teenagers. When held to current stats, seating /comfort was an afterthought. “It’s tight” is the understatement of the day. (Future modification will be to cut the fender and push the seat back to a more comfortable position.) 4 Cylinder Original shit (Points & condenser. That at current have been shot out burnt out or just F.U.B.A.R. for faulty wiring and not rocking any Spark. They will most likely be replaced with new wiring job and electronic Ignition.) to get my project started I rolled my ass to the parts store and purchased a new battery for the project and arced the starter just to hear the engine make the noise and see if it would actually turn over and do what engines do, somehow I found myself on the receiving end of a overzealous of a nice shot of hot juicy oil across my grill and smiling like a Porn star on the receiving end. F&^Cked up, I know. But sometimes Progress means getting dirty. I Looked like the pivot man in a bukkake video and my friends of course got a good chuckle out of it. It would seem that some unknown person disconnected the Oil Pressure sending unit, Line and gauge and just left that bottom part in the block which was positioned at the correct trajectory that provided me with that fun filled flat fender facial experience. Once I get the wiring correct. Then its time to work on the seating. Being 6'4" rocking about 300 lbs. of built for comfort, not speed the seating is a little tight to say the least. I like how this rig is set up. Especially the Roll Bar. As you noted Room is not one of the attributes of this rig so the roll cage and roof rack are looking good. So that may be plagiarized in the near future. I will also look into the replacement of the steering column with a wonderful tilt O Matic and looking at the pedal positioning I can foresee future adjustments with the pedals .
Thanks for sharing
Do it!
I did. Love some of the Mods that are on that old War Horse. Nothing like a Flat Fender @@-oiiio-3993
This has got to be one of the most functional flat fenders I’ve seen! Giving me a bunch of ideas for my CJ3B! Keep the flatty videos coming!
Very good jub ❤❤❤,”God bless you.
I have another here in Dominican Republic 🇩🇴 ( use to have another ones, but somebody owner it.
It was a ford 1964,war ;but now I only have another like this jeep.
Very nice and well thought out.
Glad you liked it!
thanks for some motivation for me to get out and work on my 55
Outstanding resto mod. My dream Jeep. I suppose to get what you want you substitute goal for dream and start planning. I hope I can find someone to do this good a job when I put mine together, Thanks for posting this.
A very sweet ride.
I have my dads 49, I need to restore it similar to this. It already has a Buick V6 ….
My hot rod 'Flattie' (titled as '46) runs a Buick 225 'Odd Fire' with Kenne Bell intake and internals, MSD, too much carb, fat headers, 4 speed, Warn overdrive... .
One cool capable rig! Glad his kids got it back!
Love those flat fenders, had one in high school bought for 600 bucks
Rad rig and a great tribute for the kids to have of their dad!!
Awesome looking jeep. Great build. I believe those kids will enjoy that jeep. I really like that tilt steering.
Thanks 👍
Nice! Very early CJ, almost just like an MB.
the tub has shovel slots so its military, and on the drivers side so its an MB. the windshield looks like a cj3 but its a military m38 since the center vent is bolted shut
Love MBs! Especially this one, kids, don’t ever sell dads Jeep
Lights in the inner well... super SASSS!!!!
Awesome flatty! Can’t find em grind em! lol
Looks like a well built machine!
See this kids ...take care of your stuff..it'll mean something to you one of these days
Very nicely built Jeep 💪🇺🇸
Fantástico ! Como me gustaría tener uno y con el v - 6 con el que se fabricaron los últimos , una joya de la marca , hoy deben ser tesoros valiosisimos de colección! JEEP , # 1.! 👍👍👏🇨🇷✌️
Very well built jeep, hell yeah....😎✌
Love those full floater rears. But l sure do love seeing the hubs on the rear axle. Oh well. Nice tilt/tele. Mr Borreson had that in his 70’s Monte Carlo / a swivel seat. He looked like boss hog. Build is bad ass...
Looks like an mb by the shocks
Holy crap! Let it go everyone. Nice Jeep, ‘nuff said. You make yours the way you want it; it is just a jeep after all.
So the only thing 46 is the title... love the mb/gpw stuff. Wish I never sold my 46...
Yeah, its a keeper...
Además todo tiene un sentido , súper práctico u funcional👍👍
Badass Jeep!!
Is good story i love it
Took out the tanks under the seats?? Nah. Mine was first year for civilian production. Throw out the bumpers. Junk. And plate the frame so it’s boxed.
It's pronounced "Will-is".
302 ci ford. 750 holly dp. Battery between the seats. ? Mine did. Did is the key word.
I’d take that any day over the crap keep makes today!
Who did you have make the rear shafts? Im looking to have a set made for my ‘48
That’s an M38 windshield.
Badass
A fav new MC of mine is one that looks like it was built in the 40s. Someone should copy and market the 40s Jeep .. so simple.. thanks to effing regs, impossible.. don't forget your face mask. lol.. We're screwed.
Late comment...BUT, that's kinda a thing. Google Mahindra roxor.
Can you run an overdrive with the center section Dana 60
You really need to have an off set rear end to have an overdrive.
крутой джип!
That’s a 3a windshield. Not a 2a.
M38. Vent has straps over it, does not open.
Hmm... How about calling it what it is. A highly modified Jeep with a 1946 Willys body. That’s like calling Bigfoot ( the monster truck) a ford pickup. Is that a CJ3A windshield? Those were made from 1949-1953.... recessed headlights on a 46?
It's not a '46 body, it's a somewhat modified MB (if flat toolbox lids are original).
Windshield frame is M38.