The most annoying thing when it bounces on commisioning :D BUT at full speed it should be stuck- It means it needs compensating chain to reduce stress on ropes and whole whinch assembly
@@artronics5382 I am operating on elevators up to 1.6 m/s I see the problem of rope tensioning on this one so it could have been faster, but compensating chain / line under the cab and counterweight would greatly fix this issue which can be destructable for whole winch assembly (ropes are the part of winch) during emergency braking in 'downwards' movement with empty cab
@@BigPeretz the counterweight almost never matches the weight of the elevator. It helps reduce the size of the motor for a given capacity tho. Depending on how much friction there is in the system it could practically freefall if it's unbalanced(which it usually is)
Must be a very hard stop, scary (but fun) indeed...
It looks even scarier when it falls, my brother
That’s because you’re plunging down the shaft in full speed into a buffer, that’s probably when there’s an even harder stop…
@WioIetta hello brother..This is background music of KGF Indian movie
Lift be like:Weeeeeee..
STOP (with very heavy russian accent)
The most annoying thing when it bounces on commisioning :D
BUT at full speed it should be stuck- It means it needs compensating chain to reduce stress on ropes and whole whinch assembly
Yes brother, are you absolutely right?
@@artronics5382 I am operating on elevators up to 1.6 m/s
I see the problem of rope tensioning on this one so it could have been faster, but compensating chain / line under the cab and counterweight would greatly fix this issue which can be destructable for whole winch assembly (ropes are the part of winch) during emergency braking in 'downwards' movement with empty cab
Also do the Crash Test of the Elevator 👀
Hahaha 😆 👍
You think Elevators are cheap They're too expensive to buy
Thus system is also in India as this saved me and my friends from a lights out crash
Absolutely brother, if your lift is good and of best quality then you are safe otherwise you are not safe.
😨jumping the Elevator & 65º
Very high quality 👍
Thanks bro
@@artronics5382 yea
hello i have been on a lift when going down the lift doors did not fully close and it was moving shall i report this to a staff member?
But safe
Very safe and danger
It is safe brother, there is no problem this is just a testing process. It is being tested.
But safe
Very
It is safe brother, there is no problem this is just a testing process. It is being tested.
İf a lift trully freefalls ( it will happen in seconds) it can reach speeds of km/s if there is atleast 6 floors
But
the elevator is falling speed 12 km/h
That can not be good for the elevator
😒
Pretty sure that elevators going to be going a lot faster then that if it’s free falling.
An elevator cannot free fall due to the counter weight
@@BigPeretz And what if the cable holding the counterweight snaps in half?
@@hawaiidispenser Governor 🥵
@@BigPeretz the counterweight almost never matches the weight of the elevator. It helps reduce the size of the motor for a given capacity tho. Depending on how much friction there is in the system it could practically freefall if it's unbalanced(which it usually is)
When elevator falls- cab falls upwards in most cases... Safety gear works only on cab falling downwards in most cases
I think the elevator must have broken, I don't know what could have happened with that
this is a safety test to make sure it is working. read the title before leaving a retarded comment
2x elevator
Who else thought the music was we will rock you at first
ElEVATOR😮😮😮
Yes brother
doesnt look good. it bounces and it looks like something broke off