Horizontal Directional Drilling Installation Animation
Vložit
- čas přidán 22. 05. 2024
- Animation of Air Sparge and SVE solutions for contaminated soil remediation. Directional Technologies uses horizontal drilling techniques to reduce downtime and lower the cost of clean-up.
- Věda a technologie
I've made so much money having to resplice Fiber optic cables because of these machines going through them. Thank you! 😊
where are you from?
How much
Congrats zack
Now they use those to put in fiber across whole city ! Doing it right now
I flag for a dirt crew that uses a bore machine and vac trailer. Its not about the machine but how well the crew operates and communicates. The crew I work with hasn't broke any existing lines of utilities in the 4 months I've been with the... it's a great system and least invasive approach to updating utility lines.
This process of installing conduits is so fascinating. Love the video.
same
One of best video which cleared my doubts of this type of horizontal drilling. Thank you.
Great video. Great clarity. Thanks
I was thinking about this while drinking my milkshake
as you do
They just drilled a mile in one go. Can I hire this crew?
Hello - I’m looking to get an animation like this made. Could you tell me who made this for you please?
Good video !
Good video 👍
Love the video!!
_Mostly boys and girls, horizontal drilling is sitting around on the clock slowly inching your drill to get hours while traffic control waits for you to get off the road so they can go home._
I am watching this on glass fibre. Thank you.
will drilling mud be used to remove cutlings during the drilling operation?
One of the best video
Pretty Amazing
Can this penetrate the hard rock? What is the range of distance per time for various materials it is drilling through?
Bill Burdick the best damn directional driller ever
Pretty amazing
The head has an 11 degree angled bit on it that holds the locating device that’s installed behind it it tells you depth, posityor negative degrees in (pitch)0.0% is flat plus anything means it’s facing upwards by degree negative is facing down in degrees. The device in the head is held in place and tells you where the tip of the 11 degree angled bit is facing so you aim it up down left or right or anywhere in between to steer your way around throughout obstacles etc. I’ve been operating since I was 16 but that should some up some questions
Getting ready to start green on a crew, what’s the biggest dangers?
Been. Burning now for 12 years started out with a ditch witch 920 then a 1720 and just got a new jt20 but it always ain't that easy
Assistindo no Discovery sciency como é fabricada essa máquina, interessante, vim aqui pra ver como ela funciona, muito bacana. Parabéns a quem inventou essa máquina. Forte abraço. 🤝🇧🇷
very good
Can u pls tell me Which software u use to animate ..???
This is nice
God work
Informative animation, but fairly unrealistic horizontal curve.
Character In the video It's great, I like it a lot $$
How do you know if the head going straight, turn left or right, going up or going down? Thanks
There is electronic beacon inside the drilling head. Can be powered by batteries or cable. There are different tracking systems (to see the drilling head location) but all of them tells you about the bit location, depth, inclination angle, tool face (that you need for steering), and some optional parameters like batteries status, temperature, downhole pressure, azimuth, predicted depth etc.
Reading the information from the beacon can be wireless or through a cable which goes all the way through drill pipes. There are radio, magnetic and gyro systems available for determining the drilling path.
How do you drill and bore through or around rock formations and or boulders
consanna as a bore operator i can tell you its very frustrating drilling thru boulders and rocks . In little rock you have to “carve” your way thru rocks instead of just pushing it the whole time
Its a pain in the butt, and you can damage your equipment.
good video, but how does the drill change direction or depth?
This is a very simplistic definition, it's by no means this easy, haha! Mostly it's hydraulic pressure up at the drill head that will change the orientation of the bit so that when the line is pushed it will move in that new direction. It can't change drastic angles in a short distance as the line can't handle those stresses, but gradual changes are possible.
@@samanderson7745 I’m a novice but thought this was way over simplified. They are drilling near my house and it’s taking a week to go 25 feet.
@@pyronixe could be a number of reasons for that. There is probably a lot of other underground utilities that they have to work around so they have to have everything located and think several moves ahead while working. That said, are you sure they've only gone 25 feet in a week? It can seem like they haven't moved much but have actually gone a decent distance.
It's a pretty good way to cross utilities but it's not that easy as they say in that video
How does the drill operator make the head move up or down or left and right ? Is the speed or what ?
It isn't drilling, it's pushing the head thorough, there's a slanted shape on the front that can be turned, which pushes the head to the side, all the time. To go straight, turn the head often, all the way around. The guy with the detector follows it at all times. At least, this was how it was explained to me
i have a homework to be done but this is more important.
The drill inserted at 45 degrees angle, but how they straightened it parallel to the surface? Can anyone explain?
Your locator will give you a certain percentage to get up or down to to keep the head level. So let's say you go in at a -30% you'll keep going up 10% until you're level and then adjust from there it all kinda depends on the depth you're allowed to be at it and how long your rods are
Wow so easy..
Did that last week
Exillent tachnologoi for hdd
what software was used to make this?
Can u please also tell me which software is used if you figured it out.
Hi can I use this animation in my page ?
I feel sorry for you not getting reply after 2 years too
I appreciate that you asked for permission
@@Tanmay_Mom 😂😂😂...
Use it ,I am giving you the permission
I've been doing tho for alittleover10 year now. It's a hate /love thing.
How the drill is directed ? Any video about it ?
There are several methods to know where the drill head is located (guidance systems). It basically boils down to changing the direction of the bit. Try this video or email me. elobello@aegion.com.
czcams.com/video/cl8BBoCV7gU/video.html
Simply via electronics in 2019
my company does this i just can never talk to the operator because im doing safety overwatch
Also more potholes, landslide, & earthquakes.
Ktoś to kupił w Polsce? I już przetestował? Na stronie próżno szukać pełnej specyfikacji technicznej!
Кто нибудь объясните как он поворачивает?
Can these drill under railroad tracks?
Yes. In the US, most railroads have pretty deep minimum depths for pipes carrying fluid. Feel free to email me. elobello@aegion.com
Scott Hayes yes, rivers too, wide rivers even.
Accurate Construction Services Brighton, Michigan. Tell em jr sent ya.
Been doing it for 8 years I love my job I get paid to play video games
Всем похую))
driving the worm
i want to learn!!! could you help me?
You can choose for one of the above gifts
can you clarify me how the metal driller bents?
Ash king god allows it too
I need some one who can get me a auger horizontal drilling machine for job.
(In condition )
mujhe ek 18 ton capicity ki hdd mc japanees make kee purchage karna he
That is my job
This is the answer of countries flooding and sewerage system
Isn't it.
How driller changes direction and how it goes up and down??
czcams.com/video/cl8BBoCV7gU/video.html
It have a steering,
Contact me for more information.
Ayush Lal theres usually a locator which can be in many different brands such a “ falcon F5 , subsite, ditch tracker 150 and ect. “ someone who knows how to read the pitch can guide you with a cloak type system . For example if you want to go up you push 12, going down push 6 , push 9 you go left and so on .
لماذا لا توجد حفارات لإنقاذ الطفل ريان
Can you use this to create a water pump? Take water from the ocean and put it in a man made reservoir?
If you install the pipes sure, why not? It doesn't really need to be for electrical conduits. I use this method on my plumbing projects many many times. Install a shut off valve and there you go!
💚🤘🏿
how the hell can it drill in a curve like in the example
MsJinkerson it’s crazy how these work but it gets the power to steer from the equipment pushing it through.
Twitter thread about a woman with a power line in her skull brought me here
How do you turn it left right up and down? that is the question i am needing answered
How much does that drill cost
Hi , I am a driller in African who won't the answer for the same question.
Please let me know if you get it.
Oscar Díaz a typical JT20 brand new will about $80k . That size of machine that looks about a jt2030 would roughly be about $150k
Okay thanks
I have a set of drilling crew.
We need, auger horizontal drilling machine. If some one can get us any for job. With condition
William Adjei you could talk to companys like ditch witch and vermeer for a horizontal bore drill
इसकी कीमत बताओ कितनी है
Can you send me HDD profile making app
Yes sir plzz
Inbok number yes.081220549142 thank
Your process very good to avoid more depth & to reduce length. Thanks
Can i make some.money in this industry as a crew?
Do you want contract with saudi Aramco.?
Can you provide one
Pakistani lier
Hi
Lol I make these at work
Im job to-do would like preschool triple
Haha its not that easy .... But yea that's how it works in a perfect scenario
Who's here from Twitter
The biggest drawback of this machine, wheels of this machine damages the road while moving or working on the road.
SAM how long can it drill???. I have found a abandoned cable passing Underground across my home. I think someone has done horizontal drilling
Fake news.
aaa
sar enka mobile number Mel Sakta h kya
Substitle
「動画の音が良くない」、
My job wanted me to operate this only paying me 21.50$ 🤦🏽♂️ yeah right I quit
Pagla
GravE digging NASA Vade Beasley first Astronaut at Restaurant noon moon lunch and luanch alien Grey, FBI Commander Roll meals, Colombia moon,dark SiDE, from Grandson John Robert Bruffett Junior 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸 marines covenant alien movie
"Electric"… WHAT?!? It's a freaking adjective!! 😡
Typical bore crew, not pot holing anything.