Super Easy Set up Pressure Pot for Resin Casting!
Vložit
- čas přidán 23. 07. 2024
- In this video, we're going to show you how to set up a pressure pot for resin casting in super easy steps. This pressure pot set up is ready for use right out of the box, so you'll be plug and play for your next resin casting project!
If you're new to resin casting, or you just need an easy way to set up your pressure pot, then check this video out! It'll show you everything you need to know to get started in no time at all!
Pressure pot for resin casting made super easy. This California Air Tools pressure pot come ready for action with no set up necessary.
5 gallon Pressure pot amzn.to/3pjbfcy
2.5 gallon Pressure pot amzn.to/3pkvLcR
8 gallon air compressor amzn.to/46eMeQx
In Line Filter amzn.to/42Trx9L - Jak na to + styl
Great explaination Jake, a must see video for prople setting up a pressure pot
Thank you Mr. Mint
Thanks for the video Jake. Very helpful.
Thank you Paul 🦾🦾
Another very informative video thanks Jake for sharing
Thank you Shane. 🦾🦾
This is a great informational video on setting up the CA Air Tools pressure pot! Thanks Jake! 💙
💙💙💙💙
Indeed, very nice job Jake. ;)
Thanks. I had forgotten all that
👍👍👍👍
Just the video I needed 😊
I freak out if my pot goes slightly over 50 lol, guess I should chill out.
I've never adjusted the pop-off valve, doing that would give me more peace of mind 🥰
💜💜💜💜💜💜💜💜💜💜💜
Great video Jake🎉
🦾🦾🦾
Great tutorial, very informative!!!
🦾🦾
Fantastic video Jake, very well explained
🦾🦾🦾
...really good info...thanks Jake...👍
Matt
🦾🦾🦾
Just got one; now not scared to open it up
Sweeeet… Glad I could help
Congrats 🎉🎉🎉🎉🎉
🦾🦾🦾🎉🎉🎉
Great tutorial! I was just wondering…could you do a tutorial on how to put that mold carrier together??? Please & Thank you 🤔😬😵💫🫨😶😂
😂😂😂🧡🧡🧡🧡
@@JakeThompson maybe some day…🤞🤞🤞🤞🤞
To level the floor of your chamber, you can also pour in a bit of resin and of course, let it harden. Just enough to level out to the edges.
I am afraid if you spill resin on it, you won’t be able to clean it up.
👍👍👍
🦾🦾🦾
Outstanding video on setting up the CA Air Tools pressure pot, Jake. I am very happy you now have four in your shop! Well done. See you Saturday. 💪💪💪
Thank you Mr. Jim.. I can already see that it’s going to be a big help.
Thank you so much for this helpful video, I’m trying to understand what and how a pressure pot for resin works! I have a question, how is the air compressor set up? And what is that little lid pop used for?
Here is a video on the air compressor. czcams.com/video/wqIWYf3dhs4/video.htmlsi=cMExMBR4LUio4JVg the pop off valve is a safety measure to ensure you don’t over pressure the tank.
@@JakeThompson my hero!! Thank you 🙏🏻
Jake do you think the 2.5 gal cal. pressure pot is adequate and what pressure do you suggest?
Thank you for all your help
Lots of people use the 2.5 gallon and are quite happy.. I cast bigger things, so I use 5 gallon pots… on a good quality pot I go to 65 psi.. but just make sure it’s below the max rating for your pot.
@Jake Thompson How do you know what psi to apply to an item?
I just go below the maximum rating for the pot.. but I have just heard online that you need 45psi for it to get rid of the bubbles.
Hey Jake. Great show last week. My new pot is coming tomorrow and I can't wait. I'll be a beginner at this so I just got the 2½ gallon pot. Just one question and I think I asked you before, but I forgot. I'll just be putting 1 or 2 small molds in at a time. Did you say keep them in about 4 hours? Thanks and I'll see you Saturday.
Thank you Michael.. if you are using Alumilite clear slow… 4 hours is the demold time.. I take mine out at least 2 hours in the pot 🦾
@@JakeThompson I ordered Total Boat High Performance. I thought measuring 2 to 1 would be easier for a beginner. Would it still be 4 hours? Thanks for getting back to me.
@@michaeldequatro1012 Somewhere on your resin will be a demold time, leave it in the pot for that long.
@@JakeThompson Thank you :)
I'm curious how long you put your resin in to degas it? No doubt, it will depend on how much you put in at one time, but say a pint or a quart quantity?
With Alumilite clear slow I will take most things out in 2-4 hours. Any other resin or epoxy I will leave it over night
I just got one from VEVOR a 2,5 gal. I cannot make it go above 30psi, my compressor pops out 😅 any suggestions?
Do you mean the pop off valve on the pressure pot.. or your compressor poops out? Lol
@@JakeThompson my compressor hahahaha
@ 😂😂😂
I recently purchased this same pressure pot and I noticed when I connected my compressor the pressure gauge on the pressure pot does not move. I'm new to this and haven't been able to find any answers to this issue can you help? I would really appreciate it. I even called the company and they didn't know
I would go to the simple stuff… can you hear air going into the tank.. does your air compressor have air in it.. ( I’ve had someone not know they had to have the compressor on and the out valve open.. Is the regulator letting air in?
@@JakeThompson hey Jake thanks for the reply. I am able to hear air going in the pot as well as my compressor pushing the air in. It's just that the gauge never moves at all so I'm not sure what I'm doing wrong. Perhaps a video explaining these steps would not only be helpful for me but for others as well. Especially anyone getting into using this tool in the future. I've looked everywhere for an answer and can't find anything explaining this which is odd.
@@FALCONMINISTUDIOS message me on Instagram and maybe I can video chat with you
@@JakeThompson that would be perfect thank you!
Did you make those carriers?
Yes.. they are on my site 👍
😃💪😃
❤️🦾❤️🦾
😂😂😂😂😂
👍👍👍