The best 3D prints to organise your life
Vložit
- čas přidán 3. 06. 2024
- Check out my 2nd channel, TT Racing: / @ttracingyt
Life can be messy, so why not 3D print some solutions? This video showcases some practical prints to help organise your life. Each model is free, easy to print and no hardware or tools are required to assemble or use them.
These are the types of prints that can convince friends and family that 3D printing is in fact pretty useful. Consider what you can make for your loved one to put a smile on their face.
Some of the filaments from this video:
Stone PLA: x3d.com.au/products/x3d-pro-s...
Marble PLA: x3d.com.au/products/marble-stone
Winter gradient PLA: x3d.com.au/products/x3d-pro-g...
Starlight twinkling PLA: x3d.com.au/products/polylite-...
0:00 Introduction
3D printed tools part 1: • 12 3D printed tools yo...
3D printed tools part 2: • 12 more 3D printed too...
0:51 Office
Wavy Pencil Holder by SNASA: www.printables.com/model/3273...
Pen holder by dirk144347: www.printables.com/model/1083...
Skull eyeglass holder by Mocodroid: www.printables.com/model/3591...
Sweeping 2-line name plate by Makkuro: www.printables.com/model/3301...
OpenSCAD: openscad.org/
Poo emoji: emojipedia.org/pile-of-poo/
5:15 Kitchen
Fabric coasters by rorys3D: www.printables.com/model/2307...
Curvy cam lock bag grip by squinn: www.printables.com/model/5094...
Bottle Dryer v4 by Quattrox: www.printables.com/model/5175...
Can lid by MakerCameron: www.printables.com/model/5076...
Red Bull dispenser by Stamatis Kambanis: www.printables.com/model/5117...
Drink can dispenser by Enigmar: www.printables.com/model/1865...
EGG_ROLL basket by Cisco: www.printables.com/model/5312...
Egg rotary dispenser by Ljhtom: www.printables.com/model/2507...
9:18 Travel
Toothbrush case by codewarrior: www.printables.com/model/5071...
USB Cord winder by TinkrMakr: www.printables.com/model/5660...
Universal travel coffee gimbal by mobiobi: www.printables.com/model/1293...
Cup insert by cpenner: www.printables.com/model/1514...
Collapsible basket by 3D Printing World: www.printables.com/model/2240...
13:13 Conclusion
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: / teachingtech
Awesome list sir! That basket at the end was one of the first 50 things I printed when I got my new printer and was totally new to 3# printing back in 2020. You're right! It is so satisfying to deploy.
I saw a modular organizer you might like. I think it’s called Gridternity?
is there a chance you know who designed it? i bet its some boring genius
It's Gridfinity 😂
who made it? seems pretty cool, they videos about it are great
Didn't some guy named Zach Friedman make it
Total scam, totally a bot, the guy is a total cyborg.
That tooth brush cap sent shivers down my spine. Thinking about all those bacteria happy to find a home in between the layer lines....brrrrrrrrrrrrrrrr
A great Kitchen addition is the IKEA Skardis pegboard and any number of handy little designs - I have one I used to make an "Espresso Corner" for my best friend that has Portafilter holders I made, a Tamper and WDT holder, WDT I made her and other items.
Love it! This should be a regular series!
This was way better than I was expecting; I could definitely use the entire set of objects for kitchen and travel. I've been holding back from a 3D printer, because I've got too much going on at the moment to add 3D printing to the learning curve; but your channel has totally convinced me that obtaining a printer is a must (for me anyway)
I love these kinds of videos. brings new ideas of stuff for me to print! Great job, I look forward to more like this!
Thank you Michael!
Love your channel!
Keep it coming✌😁👍💞
Great content mate. Thanks for the time and effort you put in. 👍
Michael that was cool. Yes I did find a few items in the video that will be of great use in organizing house and shop. Keep up the greatness. And chip clips... dozens of uses in and around the kitchen. Again Michael, many thanks.
A Dani Ric fan I see. It is a nice jacket. Oh.. thanks for the print designs also.have a good 1
Some great prints there. Love your work!
I have een a lot of these things before and thought at one point I might not learn anything new, but I was wrong you showed me a couple of things I hadn't seen before. Thank you
Great to see your new Alpha Tauri jacket. Go Danny Ric!
This is so good! Love practical prints, keep up the videos. Hello from Melbourne!
Nice selection Michael! See some pieces I need to print! Thanks!
The first one is perfect, i was looking for a nice can holder for forever. Thank you
Cable organizer is AMAZING!
I love the cable winder, I'm printing a few of the those.
love these! please keep them coming!
I love these projects so functional and useful
I want more videos like this!! great job!!
The Michael Laws design is great for someone in the Septic Tank Servicing field … also another great video cant wait to print some of these!
this is awesome!! thank you for curating this list
There's a number of cool things here to print, I might do some of those chip bag clips, and the cable winder is pretty cool.
Awesome list - grabbed about half of them!
I think I've got at least three things for tonight and tomorrow to print 🙂. Great video!
Great list, thank you!
Great list! I’ll be printing most. 🙌
Superb coffee cup gimble for my various wheelchairs/scooters
Brilliant video! Great inspiration for a new printer. Cheers!
Vase mode in cura is known as "Spiralize Outer Contour"
Great ideas Michael.
Thanks for these!
Excellent ideas, thanks
I've definitely thought of a cable swirly more times than one, will probably check at least that one out when I'm able to print again..
I haven't gotten far enough into my drawer organizing to use it but Zac's gridfinity system on Thangs is great. There's a TON of options, some require magnets but not all. Good if you have drawers that eat everything
this is the way
Thank you very much
For me the USB cable winder is the best! However, the others are also very good! Congratulations, really useful. Thank you
what settings did you use like suports/infill
Incredible to see a video about organizing yor life that doesn't mention Gridfinity. Quite refreshing, in fact!
Thank you
The sweeping 2 line name thing is pretty easy to do in fusion and others with the revolve tool, or the sweep tool if you want a custom curve
Wonderful stuff!
@ 2:10 -
Michael: "The kids are learning to organize their room, AND gaining an appreciation for 3D printing!"
Michael's partner: "Neither of those things are happening."
Awesome ideas!
awesome video!!! 💯💯💯💯 keep up the great videos!
Rocking the SAT jumper today Michael! Good to see Danny back but a shame about De Vries huh? Also love your videos thanks a lot!
Sweet jacket 🏎️
Was not expecting an alphatauri jacket on the 3d printing side of my subscriptions. Rip Debris
I think I have seen him in a Renault one as well.
A really good video
Enjoyed it
More like this please
Why oh why do people keep designing hexagons with bridge parallel with the bed, if you rotate the pattern 90 degrees then there is no bridging, I see this all the time, such a simple change will improve the printability of a part.
1:24 This looks like a cool CNC'd heatsink 😮
Very good.
You ae a clear F1 fan, I hope you continue to wear F1 merch in the videos! :)
Thought I was watching flight of the conchords.
You sound so like Jermaine Clement.
Great video.
Great video! I already used a two part cable winder, which separates quite easily, making it a bit inconvenient. But the one you have shown in this video looks better for me since it is print-in-place, and it stacks better. As soon as I get to print, this is on the list “To Print”.
How long do cables survive winding and unwinding? It looks like a way to break them. Then again, traveling itself might be almost as bad for them, and knots probably are a bigger problem?
@@maxmustermann2596 I have been using those cord winders for about half a year. The only damage I have noticed on the cable is that the middle gets pretty kinked, which I don't think the design TT showed off solves that.
If I print this the bottom gets stuck together, it’s so annoying
@@yobtnirp You need to tune Horizontal Expansion/XY Compensation
@@djispro4272 what’s that?
You don;t need a brake to slow the eggs down in the two-layer holder. You just need to load it from the front up the first time, so the eggs only ever get to roll one egg of distance at a time. Loaded that way, the eggs can't build up enough momentum to bang into each other and cause damage.
But what if the fill level drops to 30% while using it?
This, just load from the last empty egg
amazing video!
The clip for a bad of CHIPS*** is very interesting. It doesn’t look to far off from piranha plant haha
I feel like you're intended to start by placing the eggs directly on the bottom of both of those dispensers when they're empty. Once the dispenser is mostly-full, they won't be able to build up enough momentum to damage the eggs when you place them at the top.
You're right. Less fun but safer.
@@TeachingTech- Can I put SUNLU 3D Printer Filament in Ender 3 but it’s PLA ?
@@Jakeypoo-di6hyyes
Lock bag grip 👍
Please post your makes on Printables. It’s a little thing that I’m sure would be appreciated by the creators you featured. Thank you. 😊
I found a handy tailor's tape measure dispenser on printables, stops them getting all tangled up.
Damn, nice example names!
Thank you for this! The toothbrush cover is something that has been driving me crazy, not anymore!
Not sure I would use it. The bacteria that would get caught in the PLA could be pretty gross.
I love the not wasting any time to get the Ric merch
Hahaha, now I know your name! I gonna make a Sweeping Name Plate that says "Michael Laws ME!" :P
The cable winder looks like a winner. I've lost count of all the USB cables and earphones I have.
That collapsible basket is cool too, but one thing I've learned about children is that if there's a basket to collect things in, they're determined to fill it.
For the collapsible basket, shocked you did give egg collecting as a use. Have a thin stack of them by the door. Whoever is going out to get the eggs, they grab a basket or two and just go collect.
0:25 very fitting how you say you are all about functional and practical while wearing an alpha tauri shirt lmao
Did you really go to the woods with your 3d printed basket?
Nice video ,useful prints.
I printed the cable winder but the top and bottom got stuck. I love this idea better then any other I’ve seen! I’m just very very new to the printing game so it’s probably a beginners mistake? Any help would be the best! 🤓10:03
(As for the Pen Holder) A TIP: When storing Pens/Pencils, it's Pens down (so the ink flows to the tip) AND it's Pencils up (so their tips stay sharpened).
except for fountain pens
@@andrey.p you don't use your fountain pen caps as backup ink well booby traps? I don't know if you're using fountain pens correctly unless half of your worldly possessions are permanently ink stained.
очень полезное видео! спасибо, я окончательно понял, что принтер мне не нужен) держатель кружки на руль убил наповал)))
Hi iam new to 3d printing can you suggest me some daily use and need of filaments. Which filaments should i buy and keep
Where to I organize my organing prints? In more organizing prints?
New sub 🎉
Anything that involves hygiene/cleaning or food/beverages I tend to avoid printing (except bag clips). It's just too easy for fdm printed items to have great places for bacteria to stay and grow.
If you really must print stuff that also needs to be sanitary, look into food safe clear layer paints or epoxies to coat the print in to make a more even surface so bacteria aren't able to hide and grow.
Today was the day I learned that some people dont keep their eggs in the fridge. Who knew?
Eggs have a natural coating that protects them meaning they don't need to go into the fridge. Except in the US they're washed for retail, removing the coating, so they should go into the fridge.
@@LxRv coating or not, they still last longer in the fridge
Eggs sold in the USA need to be refrigerated, as they have the protective cuticle removed. Eggs in other places generally don't, so they're often okay not being in the fridge.
@@xbadjokerxhow long do you hold on to your eggs 🙃??
It can be hold for 14 days without any problems outside the fridge..
But mostly the temperature is the problem. In warmer climates it is sometimes better to store the colder..
Like others have said, store bought USA eggs must be refrigerated because we choose to acid wash the eggs. That limits the amount of bacteria but also allows eggs to become internally contaminated.
Unwashed eggs do not require refrigeration for some time. Possibly many weeks.
In order for a good system to work a country must have some uniform rules and a type of food handling culture.
brb printing the glasses skull right now
Where do you get your designs from and how much do they cost?
I cannot print that fabric coaster in silk PLA. I've tried 3 times already with 3 different settings. When I do with the PLA, it goes smoothly, the coasters look fantastic. I have no idea what I'm doing wrong. I printed the rabbit, it was all good. I'm using eSun PLA+ and eSun PLA silk in my Ender 3 S1 Pro.
Gridfinity. Champion of 3D printed organization. … Great video! Thanks for highlighting these, I see several I’m going to print.
That pencil holder looks like it'd make for great octolapses, haha
I feel like I need to print all of the files here
Perfect video at the perfect time. Was just looking for stuff like this
@teachingtech my ender 3 pro prints slide around towards the middle of prints and I’m practically bald from all the hair I have pulled out trying to find out why please get me answers
No mention of Gridfinity? Shame! It's currently the best and most modifiable organization ecosystem.
I need more of this, please!
☮️❤️🌈
OMG WARRIOR CATS
I really need to start my 3D printer fund 🤦♂️
I've watched TONS of videos on 'useful' 3d prints and this one also has nothing useful lol. I always hope i'll find at least one idea that i could use, but...
I don't really travel.
I don't use a toothbrush. I use floss, soft rags and mouth washing to avoid scrubbing, abrasives and bristles As a result i have no idea what a toothache or dental problem is. I have all my teeth (minus some chips and scratches from faceplants) including my wisdoms
I don't have kids.
I already have a mug full of writing utensils, who doesn't?
I don't have a desk i need a name plate for.
I don't wear glasses.
I don't have any bottles to dry.
I don't eat eggs.
I don't eat chips or anything from a bag.
I don't drink from cans.
I drink Cubano coffee at home out of a nice small espresso mug like a civilized monkey.
I don't have cables i need to roll and unroll.
I make nice live edge oak coasters from 'cookie' cuts of logs. Probably have a hundred of them, in a box somewhere idk i never use them, i don't have cold drinks or surfaces that could be damaged by them, or guests since i live in a turtle in the sky and nobody climbs a 7000' mountain to visit a weirdo in a weird little turtle shaped hobbit house.
Don't get me wrong, 3d printing is hella useful, i make all kinds of stuff but almost none of it is anything i ever find on any website. I'm always making replacement parts for stuff, like i fixed several broken tripods by modeling replacement head pieces, i make guides, tools, and templates of all sorts, and i make and sell locally branded keychains and earrings to tourists where i live when i have the time. But never, do i ever find stuff online that is useful AND designed properly. I just downloaded and printed a chisel and plane sharpening guide because i was lazy about modeling one. Well, surprise! The mouth is too shallow to hold any of my chisels, it bends and goes all crooked when you tighten it and is almost impossible to get a blade mounted straight in it. But it's got a bunch of likes lol.
Right now i'm designing a minimal modular 3d printed rc airplane parts system that works like 'Legos', you print out as many small building blocks as you need and can put them together in all sorts of configurations and sizes.
hallo, am very new to 3d printing and I do try printing the USB Cord winder by TinkrMakr, and it was a hassel removing the infill how do I do that without infill and both of them snapped when I twisted the top
How do you manage to get an sh sound in the word "assuming"?
Not sure I am happy or sad after watching this video, because I suddenly got a high demand for filament 😂
Most of the food based (toothbrush) I wouldn't use. Knowing what we know about how PLA is not food safe, I don't think it is worth the risk.
"Practical 3D prints to organize your life"
Let's print some chainmail ...
lol.
How safe is using 3D printed parts for food-related stuff?
Bacteria can collect between layer lines, so it's not usually recommended unless you use some sort of food safe liner. That said - none of the prints in this video directly touch the edible part of food.
I printed the cable winder and it just one piece - no winding etc - what am I doing wrong please - ender 3 s1 pro - both the 5mg and others were the same
I did the USB cable wind up storage.. It was stuck when trying to free the center part by turning it, it just snapped the center winder inside.. so that was a waste of 5 hours printing.