Install 360° camera + 12.5" monitor + dynamic indicators
Vložit
- čas přidán 25. 08. 2024
- This a detailed video about how to install and calibrate aftermarket 360° camera with the 12.5" screen and dynamic indicator mirror lights on Mercedes S212 or W212.
The installation of the monitor in detail on:
• 10.25" Android Screen ...
How to remove the air vents:
• W212 Remove install in...
How to remove the glove box in W212/S212:
• W212 Remove install in...
The camera was purchased from Aliexpress' Autosee store.
aliexpi.com/EA3j
The monitor MEKEDE "N400 Plus" was purchased from Aliexpress at
aliexpi.com/3DwM
the ONLY full and complex video on internet, about this 360* cameras. maybe people will learn how easy is NOT to start something like this without minimal knowlege about DIY arround cars.
thank you for sharing this. at least for me is gold mine. i watched like 2-3 times full video before i start instaling mine. you show what can go wrong or good and how should be instaled or what the results should be.
You are the man.
Subscribed and big LIKE.
thank you
@@mercedes-benz2127 can you please say what 360 camera kit you have? what module, name? i bought something that is different and pain in the a$$.
how that in reverse you dont have that radar image from the stereo unit? i havve similar and i cand take it off or deactivate it.
Thanks!
Great job friend. Have you lost the license plate lighting with the installation of the second camera?
No, haven't lost it. The rear camera from the kit has the light built in, and it works, but gives a bit less light than the left one.
Great job !!
Nice work
Super Job. 👍
Where does the white wire too? 44:10
I did not connect it to anywhere. It's a trigger cable for the external monitor if you have it. Have a look at the following page that sells very similar camera system. www.aliexpress.com/item/1005005489763655.html?spm=a2g0o.productlist.main.37.46ff2cc0azsWxM&algo_pvid=9906d72e-865f-492d-85f2-6f1e39573af0&algo_exp_id=9906d72e-865f-492d-85f2-6f1e39573af0-18&pdp_npi=4%40dis%21GBP%21213.11%21213.11%21%21%21267.02%21267.02%21%40211b82c017207843660287995e5062%2112000035945866652%21sea%21UK%212521224462%21&curPageLogUid=jhimC2KZlGjJ&utparam-url=scene%3Asearch%7Cquery_from%3A
Hi, I have installed this system. On putting reverse, the display is flickering between rear and front view. Please advise how to fix this. Regards
This this possible for the w211 thx
Not sure. You better ask the seller. They should know if it works with your model. Sorry. thank you.
Hi. Great video thanks. I have two questions. Are you happy with the image quality? Can the system record whilst driving to act as a dash cam? Thanks again, Christian
Hi. Yes, if you attach a cam that is recognisible by this Android, it can record. But it would be consuming resources, and thus slowing down the operating system. So I would better have a separate dash cam. That's what I think. I never tried to use this system for live camera recordings. It has two usb (usb-A) slots and microSD and microSIM slots as well.
Hola, referente al sonido, si que puedes activar aux en el menu ingeniero. Hay mucha informacion aqui mismo en youtubetocando a la vez colgar + # + 1 y mantener hasta que aparece, luego en el apartado 7 HW Setting esta el aux off, lo cambias a on.
Muchas gracias.
hello, i have similar 360 camera installed on my suv, wiring installed perfectly, but the calibration is way too complicated, just want to ask, how do you measure the calibration points (on a rectangle) showed in the end of the video, is there any specific measurements for those? please help me, im lil bit desperate on how to calibrate the bird's eye view perfectly on that specific 360 camera module.. thanks in advance sir (waiting for your reply tho) 😅 - a subscriber frm philippines
Sorry for the late reply. The calibration markings are shown from 47:05 . Basically you draw the 4 lines that are parallel to the sides of the car. Then you draw 4 boxes on each corner of the car. Boxes are 1 meter long and wide. Then you sit in the car and move the calibration points onto the corner of each box.
Hi, can you suggest me , where is canbus low and high of car wire?
Hi, thanks for sharing this great video.
Can you please advice a camera set for my ML350from 2012, please ?
By the way, i love the background birds tweets... Looks very lovely place... Where are you from ?
Thanks for the comment. This is Birchington near Margate, Kent. I cannot really advise any camera. I did this video while installing the camera I bought at that time. You need to look around because it's been 3 years since then and these thing change and get updated every few month. If you could find the stock 360 camera system that would be the best. But I think it's just very expensive. This camera system works well, but the problem it has is that it shows wide view, but I would prefer the linear image, that is not distorted, like the standard rear view camera from Mercedes.
Hello, great Job again. Do you have information how you installed the cameras in to the mirrors? I don't have seen in the video?! Regards Tasso
12:23 - shows installation inside the mirrors. When I bought the camera kit, it came with the bottom housing for the mirrors that had cameras already in them. So you just replace the whole bottom part.
@@mercedes-benz2127 Thanks!
Hi, could this be done to a Mercedes Sprinter?
I thinks this should not be a problem.
Can this be done for GLC 2022?
Not sure about that. When you'll be buying the camera, just check the compatibility. They should always tell you if it would fit your model. Speaking of the indicators, I think it can be done as they do them for basically all models. But one always has to check to make sure it fits.
Hello good video, could you explain to me how to connect torque and what is the use of the double bluetooth that that screen has? in the settings there is a folder that says bluetooth settings and inside it, thanks and greetings
the bluetooth settings are in the network menu and also in the system menu. I used them for sound, for Insta360, and for other connection. Did not have any problems so far.
About Torque: You go to google play and download the Torque. Then connect the device. Start Torque and it should find the device. If it does not find it, than in Torque you go to settings and choose the device that you have. If Torque cannot find the device that means that this screen's android system does not recognise the bluetooth device.
Hola, que tipo de interface usaste??
La interfaz es el módulo de control que vino junto con las cámaras.
is there a camera for 2016 CLA 250?
Not sure. This was bought from aliexpress. Here is the search results on that site: www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20210427215716&SearchText=360+degree+bird+view+camera+for+benz
can you please say what 360 camera kit you have? what module, name? i bought something that is different and pain in the a$$.
how that in reverse you dont have that radar image from the stereo unit? i havve similar and i cand take it off or deactivate it.
Hi. Thank you for the comment. The kit I bought is this:
www.aliexpress.com/item/4001236869080.html?spm=a2g0o.order_list.order_list_main.145.21f21802BLcVof
It now shoes much cheaper than I bought it. Also not sure about the module name. This was 2.5 year ago, and it was a cheap Chinese 360 camera kit. It works OK now as well. The only thing I had to do since then is to replace the rear camera. What I don't like about it is that it has a wide view which I don't like. I would prefer linear rather than wide. Also, I cannot make the lines work. I mean the ones that show the live path or guide lines where your wheels would go. You are talking about some radar. What do you mean? Is your rear camera does not show when you put into reverse gear? Or something else.
@@mercedes-benz2127 on screen of display, on 12,5" android, i have a picture of the car and signs like spider web (radar lines). It doesnt mater what camera i connect, that image is fixed on the reverse screen. Can i deactivate that somewhere in setings of android unit or it is there because of the sistem instaled?
@@djovidius3545 On the screen, when you go to the settings (the very right one), then Reverse, then you have to choose 360 Panoramic Reverse CVBS. You can also try the different options and see if it works. The very top one - Original Reverse is for the vehicle original reverse camera (if you have one installed).
@@djovidius3545 Here is the link to the picture just taken that shows what I mean. Have a look. I cannot post it here, only the link. drive.google.com/file/d/1BD3pKqR-emnet6O8njmL0nc5FwASOGX5/view?usp=sharing
@@mercedes-benz2127 i will try to explpde the sistem, to find those settings. Thank you.
Who the fuck would want a ugly camera on their Mercedes logo lol
Not really that ugly. Yes, the stock system would be better. But if you don't have it, but you need 360 view than this option is not that bad. If you want to install aftermarket original from Merc than it would be fairly expensive. Consider that only one camera is $700 second hand, and you need 4, and then the control unit.
just buy a car that has the items you want saves all that crap.