How to install 360 degree cameras in car? Long video from carsanbo

Sdílet
Vložit
  • čas přidán 19. 12. 2022
  • The car: LEXUS 2015 ES200
    360 degree camera supplier: Guangzhou carsanbo technology limited
    Installation spend time:About 3 hours
    Installation cost in China :99USD
    The screen use: OEM factory radio screen
    Interface for LEXUS :Yes,Sample car using CVBS channel .New version support VGA channel
    Tools need prepare:
    1. Plastic skid tools, wrenches, scissors, etc
    2. Automobile electric pen, electrical glue
    3.1 meter long hard wire, a bottle of butter spray
    00:08:Remove the left door trim panel and mirror
    01:08:Remove the right door trim panel and mirror
    01:24:Remove the rearview camera
    02:02:Remove the front camera
    02:40:Disassemble the car mirror
    04:24:Drilling hole at mirror
    05:50:The wire how to through small hole
    06:37:Install the mirror back
    08:23:How to find trigger wire(The turning light should turn on)
    10:16:How to through rear camera wire to front site
    10:51:Install front camera
    11:20:How to through front camera wire to front site
    12:53:Connect the host and interface
    13:36:Install the door trim panel back
    14:06:Install the side mirror glass
    15:56:About calibration tips
    We have 3 version chips ,blow is the link from our store .
    CR2053 Chips 1080P
    www.aliexpress.com/item/10050...
    SONY225 chips 720P
    www.aliexpress.com/item/10050...
    SONY307 chips 1080P
    www.aliexpress.com/item/10050...
    and SONY225 chips for VAN design camera
    www.aliexpress.com/item/10050...
    We also have 360 system for bus .the link as below
    www.aliexpress.com/item/10050...

Komentáře • 99

  • @themikeymikechannel2947
    @themikeymikechannel2947 Před rokem +22

    I'm doing a 360 degree both side views and front and back soon , no installation video but after it's done , I'll post the finished video when it's all done.

    • @carsanbo
      @carsanbo  Před rokem +2

      You are very kind 😊,let help more people know 360 system installation

    • @Hasan0698
      @Hasan0698 Před 11 měsíci +2

      How'd the install go?

    • @windolite
      @windolite Před 8 měsíci +5

      @@Hasan0698he never did it

  • @njurus
    @njurus Před 9 měsíci +2

    Mastery at its best he did not need to keep on testing to see if it's working in between the process 👌

    • @carsanbo
      @carsanbo  Před 8 měsíci

      we advice test the device before installation so we can sure one-stop install

  • @user-cx4eu3wx2r
    @user-cx4eu3wx2r Před 7 měsíci +6

    Thank you for your help. All the installation was completed perfectly. I did it by myself whenever I had time, and it took about 5 days. It took at least 3 to 5 hours a day. It took a long time because I did it alone, but I am proud.

    • @carsanbo
      @carsanbo  Před 7 měsíci +3

      Congratulations,so glad we can help

  • @reggierizaev
    @reggierizaev Před rokem +1

    Very informative video! Thank you!

    • @carsanbo
      @carsanbo  Před 5 měsíci

      you are welcome .so glad we can help

  • @drmohamed6256
    @drmohamed6256 Před rokem

    Great clean job

  • @billthomas9263
    @billthomas9263 Před rokem +6

    Very professional and clean job. No scratches and very neat wiring work. Congratulations, I just hope you're in the Philippines 🇵🇭

  • @ARM1886
    @ARM1886 Před 3 měsíci +1

    Great workmanship.

    • @carsanbo
      @carsanbo  Před 3 měsíci

      thanks ,hope this video can help

  • @xkurisutianx
    @xkurisutianx Před 6 měsíci

    muchas gracias por el video, tenia la duda si la señal de giro funcionaba al parpadear pero con este video demuestra que si la reconoce.

    • @carsanbo
      @carsanbo  Před 6 měsíci

      De nada, el parpadeo del semáforo no afectará la función de activación.

  • @user-hj7kx1hq1y
    @user-hj7kx1hq1y Před rokem

    暑そうw でもよく見ると意外と丁寧な仕事で感心。カーサンボのアラウンドビュー製品買うよ!

    • @carsanbo
      @carsanbo  Před rokem +1

      Yes,its hot when making installation,not a easy job,just contact us if any question,thanks 😊

    • @user-hj7kx1hq1y
      @user-hj7kx1hq1y Před rokem

      @@carsanbo
      My car is a right-hand drive car with a total length of only 3.4 meters. Will your product work?

    • @carsanbo
      @carsanbo  Před rokem +1

      @@user-hj7kx1hq1y yes ,it works

  • @perfectholiday1842
    @perfectholiday1842 Před 5 měsíci

    Can this be connected to multple screens at once to display panoramic

  • @mrbrian826
    @mrbrian826 Před rokem

    Very nice

  • @ahmetkaya8395
    @ahmetkaya8395 Před 6 měsíci +2

    First of all, thank you very much for sharing your video. I just have one question; How should I adjust the orientation when connecting right and left cameras? Is there a sensitive setting I should pay attention to?

    • @carsanbo
      @carsanbo  Před 6 měsíci

      Hello sir ,the right and left camera view image have 1/3 or 1/4 show car body ,You can watch the video on 360 panoramic calibration on our channel, which contains photos of the viewing angle

  • @tomt3883
    @tomt3883 Před 9 měsíci

    Thanks for the video. Where should I wire the 2 side cameras if my side mirrors don’t have signal lights? Thanks

    • @carsanbo
      @carsanbo  Před 5 měsíci

      hello ,you can get this signal at car fuse box

  • @robertzakrzewski1642
    @robertzakrzewski1642 Před rokem +1

    Hi. I bought this set from you but I don't know how to connect the UART 1 cable. There are two pins. Do you need to provide TX and RX signal from canbus there?

    • @carsanbo
      @carsanbo  Před rokem

      Hello UART1 is for trajectory host,you need to buy this host alone

    • @robertzakrzewski1642
      @robertzakrzewski1642 Před rokem

      And what signal must be sent to the module to read the speed of the car? Will the module disconnect the transmission of the image from the cameras after turning off the reverse gear or will the image remain for a while when driving forward?

    • @carsanbo
      @carsanbo  Před rokem

      @@robertzakrzewski1642 the trajectory host coming with kind of canbus device ,it can read the car data,like speed ,radar ,door open ,the trajectory line of car ,when finish reverse,the video of 360 system can be set keeping display or screen saver model ,the 360 system always working after car starts

  • @TheOtherArea
    @TheOtherArea Před měsícem

    Just curious - for what do you need the left/right signal triggers?
    My Mirror do not have signals and i don't know if it is neccesary to get the signal somewhere else...

    • @carsanbo
      @carsanbo  Před měsícem

      hello sir ,the left and right signal is from car right or left turning light 12V+.not from your mirror screen

    • @TheOtherArea
      @TheOtherArea Před měsícem

      @@carsanbo
      Yes i know but do i need the signal, when i need the Camera only for parking mode?
      I think this signal is only needed during driving?

    • @carsanbo
      @carsanbo  Před měsícem

      @@TheOtherArea if you need only for car reverse purpose ,i am advise you just take a reverse system with back up camera only

  • @ahscreations677
    @ahscreations677 Před 4 měsíci +1

    Need to ask one question about the side mirror that If we hole in side mirror, it void warranty?

    • @carsanbo
      @carsanbo  Před 4 měsíci +1

      We not quite sure about this ,but many new car installed 360 system after sell

  • @mohammadjuzar3568
    @mohammadjuzar3568 Před 3 měsíci

    One small question where do you connect rear camera trigger wire you are showing the connection but not saying any description of it

    • @carsanbo
      @carsanbo  Před 3 měsíci

      Hello rear view camera trigger wire need to connect with reverse lamp +

  • @pennmedic
    @pennmedic Před 9 měsíci

    So on the radio end of the camera wires, where did you wire the red wires to?? You never showed that. I know the camera end red wires go to turn singles hot wires and the rear goes to back up light hot wire but what about the other red wires? thanks.

    • @carsanbo
      @carsanbo  Před 9 měsíci +1

      Hello ,the other red wire need to connect with radio reverse trigger

    • @feisal6120
      @feisal6120 Před 7 měsíci

      For side cam, the red wire to turn signal then how about the other, where should i connect

    • @carsanbo
      @carsanbo  Před 7 měsíci

      @@feisal6120 hey ,for rear camera ,it connected with reverse lamp + ,I mean the rear camera trigger wire

  • @user-cx4eu3wx2r
    @user-cx4eu3wx2r Před 7 měsíci

    Will it work if I just connect the power without connecting the detection wire? Can I use it without connecting the rear left and right blinker wires?

    • @carsanbo
      @carsanbo  Před 5 měsíci

      hello ,of course .you can operate by a remote control

  • @user-jf6ys4wv4h
    @user-jf6ys4wv4h Před rokem

    Good afternoon . Please tell me I lost the remote from the device a long time ago. yesterday my system stopped being controlled through the screen. how do i do a factory reset? without the remote and pressing the screen. Thank you

    • @carsanbo
      @carsanbo  Před rokem

      Hello pls order one more remote ,without remote can not doing any setting

  • @lopeiaran3422
    @lopeiaran3422 Před 7 měsíci

    Will this camera record when parked or driving? Kind of like a dash cam?

    • @carsanbo
      @carsanbo  Před 7 měsíci

      yes ,sure .when play at PC .it's split screen with 4 camera video

  • @user-cx4eu3wx2r
    @user-cx4eu3wx2r Před 7 měsíci

    hello. I am planning to purchase and install a 360 Bird View product and connect ACC to power with a fuse. Should I connect to a 10 amp, 15 amp, 20 amp or 30 amp fuse?

    • @carsanbo
      @carsanbo  Před 7 měsíci +1

      hello sir ,10amp is enought

  • @user-cx4eu3wx2r
    @user-cx4eu3wx2r Před 7 měsíci

    I'm trying to connect the 360 ​​Bird View product to a monitor that only supports HDMI without navigation. Is there anything else I need besides the monitor?

    • @carsanbo
      @carsanbo  Před 7 měsíci +1

      you can using HDMI cable to connect with your monitor ,but first you need a AV monitor to do 360 bird view video output setting to HDMI output ,since default output is CVBS and AHD .

  • @truongkimson
    @truongkimson Před 10 měsíci

    can you also show how to connect from the camera box to the original screen?

    • @carsanbo
      @carsanbo  Před 10 měsíci +1

      It need a interface device

    • @truongkimson
      @truongkimson Před 10 měsíci

      @@carsanbo do you have interface device for ford ranger?

  • @juchin6826
    @juchin6826 Před 2 měsíci

    6:03 what did he spray for? lubricant?

    • @carsanbo
      @carsanbo  Před 2 měsíci +1

      yes ,you are right .

  • @cni84
    @cni84 Před rokem

    What do I do if my vehicle doesn’t come with a stereo system to view or monitor the cameras?

    • @carsanbo
      @carsanbo  Před rokem +1

      Hello sir ,you need to buy a monitor alone ,better with ahd pixel ,our store have stand alone type or mirror type if you don’t like the radio android

  • @NeilAmadeoAcenas
    @NeilAmadeoAcenas Před 5 měsíci

    What is the name of the unit and where can i buy it.. i hope you can help😊

    • @carsanbo
      @carsanbo  Před 5 měsíci

      hello,you can order this unit at here www.aliexpress.com/item/1005004410841053.html?spm=a2g0o.store_pc_groupList.8148356.11.16557935pk0xQY&pdp_npi=4%40dis%21USD%21US%20%24389.43%21US%20%24260.92%21%21%21389.43%21260.92%21%40212c01e917028930489887113e99ce%2112000029086528971%21sh%21KR%21235089132%21

  • @RashdanBb-eq6nj
    @RashdanBb-eq6nj Před 6 dny

    How to connect the infrared receiver to the box?

    • @carsanbo
      @carsanbo  Před 6 dny +1

      Hello by VGA cable

    • @RashdanBb-eq6nj
      @RashdanBb-eq6nj Před 2 dny

      @@carsanbo thank you. You are the best. Just plug and play right,

  • @M.K.Parvez
    @M.K.Parvez Před rokem

    which apps used ?

    • @carsanbo
      @carsanbo  Před rokem

      Hello sir ,our system not using app ,it can not connect with phone

  • @yahayasojaabubakar7999
    @yahayasojaabubakar7999 Před 4 měsíci +1

    But can this process also work on a Mercedes Benz w204 2013 ???

    • @saucyiwnl
      @saucyiwnl Před 3 měsíci

      yes

    • @yahayasojaabubakar7999
      @yahayasojaabubakar7999 Před 3 měsíci +1

      @@saucyiwnl do I have to chnage the screen to an after market one or the follow come screen can work perfectly, just need to buy the cameras ???

    • @saucyiwnl
      @saucyiwnl Před 3 měsíci

      @@yahayasojaabubakar7999 you need a headunit that has the 360 system support because it is a chip they need to install into the screen

    • @saucyiwnl
      @saucyiwnl Před 3 měsíci

      @@yahayasojaabubakar7999 aliexpress has the cheapest ones I would look for a nice looking 360 display that doesnt leave a corner of ur car not seen

  • @wengkit4056
    @wengkit4056 Před měsícem

    大哥 左右的电线接了门那里 然后进去车里面的红色左右电线还需要接哪里

    • @carsanbo
      @carsanbo  Před měsícem

      是接转向灯的正极,这个是转向视角触发线

  • @user-gf7lg4lf8l
    @user-gf7lg4lf8l Před 7 měsíci

    how i can add 360 view in my sienna 2021 original oem radio

    • @carsanbo
      @carsanbo  Před 7 měsíci

      Pls check if OEM radio support cvbs input or not ,if yes ,then okay ,and the second option is add the interface

    • @user-gf7lg4lf8l
      @user-gf7lg4lf8l Před 7 měsíci

      oem radio has 3 28 pin harness i don't knw which is for video middle, side by speaker wire or the last one please reply me thank u@@carsanbo

  • @xinlailiu8528
    @xinlailiu8528 Před rokem

    你好,美版2017 ES350需要刷机吧?原车屏跟你视频一样小

    • @carsanbo
      @carsanbo  Před rokem

      你好,需要加解码器才能跟360全景连接

  • @alltech247
    @alltech247 Před rokem

    how to get the video footage out of the system ?

    • @carsanbo
      @carsanbo  Před rokem

      There are have a usb memory card for recording video

  • @drmohamed6256
    @drmohamed6256 Před rokem

    Does it fit tucson 2023

    • @carsanbo
      @carsanbo  Před rokem

      Hello sir ,our item is universal,only your radio need support ahd or cvbs signal input

    • @aleajactaest4975
      @aleajactaest4975 Před 10 měsíci

      ​@@carsanbo
      Καλησπέρα φίλε μου.
      Το Pioneer AVH-Z7200dab μπορεί να υποστηρίξει αυτά τα συστήματα καμερών.;;
      Ευχαριστώ εκ των προτέρων.

  • @KemiKaze
    @KemiKaze Před 26 dny

    Why do you need this on a small car

    • @carsanbo
      @carsanbo  Před 21 dnem

      there are have some blind spot there

  • @duybangvo7691
    @duybangvo7691 Před 9 měsíci

    Tôi đã mua camera của các bạn nhưng không có interface kết nối. Giúp tôi với

    • @carsanbo
      @carsanbo  Před 5 měsíci

      which connector you dont have ?it coming with AHD and CVBS RCA output

  • @zhiktonglim977
    @zhiktonglim977 Před 9 měsíci

    This is so time consuming and required at least 2 skilled professional workers to get the job done properly.

    • @carsanbo
      @carsanbo  Před 5 měsíci

      if the first time install .it take times to doing this

  • @aaaa-by3ix
    @aaaa-by3ix Před rokem

    I was thinking of adding cameras to my car but never mind it’s a lot of work and probably expensive to hire someone

    • @carsanbo
      @carsanbo  Před rokem

      Yes,it need some shop who have experience doing this ,normally need to take 2-3 hours

  • @Viper-no6wb
    @Viper-no6wb Před 4 měsíci +1

    terrible wiring job, none of it was soldered or securely connected together

    • @carsanbo
      @carsanbo  Před 4 měsíci +1

      Yes ,I am agree with you,if he wraps the connection with a heat shrink tubing ,it will be great

  • @vjdas6
    @vjdas6 Před 9 dny

    is bird view is virtual

    • @carsanbo
      @carsanbo  Před 6 dny

      Yes ,you can see more our video know about 3D bird view

  • @doxiemamazakie1746
    @doxiemamazakie1746 Před rokem

    Location nyo sir? ano contact number nyo po

    • @carsanbo
      @carsanbo  Před rokem

      hello sir .we are in Baiyun Guangzhou .please send your inquiry to info@carsanbo.com