The Automotive DIY Snowball - More Things to Fix - Day Job MX-6 Ep2
Vložit
- čas přidán 28. 07. 2024
- Like most car builds, things snowball as we find more things wrong and things to do on our MX-6 turbo.
Sparesbox website: www.sparesbox.com.au/
Motive Discount Code: MOTIVE5 - Auta a dopravní prostředky
Never have i been more excited for a series like this one. Mx6 turbo is the first turbo car I ever had and since then I always have to have a turbo car around. Also have a blue gc8 like U guys but the mx6 was my introduction to a turbo car. Still smile about the first time I hit boost
So true, I'll always remember my first time getting on boost.
Same here, when I was 16yrs old I owned a red gt 5spd, always loved these cars, it was a very fun car… bought it for $600 bucks with immaculate body, the car was over boosting and hitting boost cut and the owner didn’t know what was wrong with it and ran like shit, turned out it just had a stuck wastegate that I fixed for free and the car ran amazing for like a year then I had to replace exhaust manifold stud on it once and they were stripped out and had to get a shop to fix the stud holes, luckily they were able to do it without taking the head off
Cant wait until Ep. 3 when they go for a spin, hit boost, and the clutch slips like crazy. The good old mx6, my first turbo car, my first love.
Fixing up your first car is always sentimental and satisfying, doesn’t exactly depend on the process itself
no point in upgrading the turbo if you don't want more things to break. For a sentimental cruiser leaving it stock just makes sense
Just buy brand new shifter bushes from Kia. They’re the same. Did that with my GD 626, and several 323s over the years.
As a massive TX3 fan I always had a soft spot for MX6es. I remember racing one at the Friday night Street drags back in the day.
Thank you so much for this series! Was the car I learned to drive on. And our shifter was just like that. And it broke the exhaust studs also! Good to see halfway around the world and some things don't change. One last thing is the balancer has the rubber in the pulley on the front, the one that was on my car came apart, something to look out for.
Much better than the 1st "Day Job" project... I know it was just a bit of fun but this stuff is more interesting to me.
Keep it simple! Love the cap and rotor explanation for the younger folks. Not everything is dbw and cop. It could be, though ;)
I had a '91 MX-6 GT White with blue interior, basically what you've got there, loved that car! The seats were top notch and how about that oscillating button for the dash vents! I think they can handle 14 psi before boost cut. Turn that baby up and hold on! I'd love to do what you guys are doing right now, but here in eastern Canada older Mazda's don't exist anymore. They all just rusted away to road dust. Like even up to 2006 lolz.
when I was 16yrs old I owned a red gt 5spd, always loved these cars, it was a very fun car… bought it for $600 bucks with immaculate body, the car was over boosting and hitting boost cut and the owner didn’t know what was wrong with it and ran like shit, turned out it just had a stuck wastegate that I fixed for free and the car ran amazing for like a year then I had to replace exhaust manifold stud on it once and they were stripped out and had to get a shop to fix the stud holes, luckily they were able to do it without taking the head off
Coming along great! Must feel really good going back to your first car after having so much more experience.
The 3D printed bushes are much better than my hose idea ! 😂😂
I use bronze oilite bushings for my shift linkages. To get ALL the slack out there is one pin that needs to be drilled out on the transmission end of the linkage and replaced with a 10mm bolt. I have the link to the bushings I use if anyone is interested.
I'd say do a shed skid Andrew but we don't need you rebuilding the gearbox the episode after that. 🤣👍
They are glass haha grenaded the spider gears in one
Great video
Love Daniel blokes a topper 👍
love the series
Corksport also do Shifter bushes for Protege/Astina wich use a G series box
Hmmm I'm thinking that might be water pump leak. Another fun job lol
Did someone say VF22 STI Turbo swap??
Was about to say the exhaust gasket doesn't seem right then the next second it swapped hahaha
Change the O2 housing you’re going to be impressed when you open up the vj11 !!!
You might regret using cheap exhaust gaskets with no fire rings on a turbo engine. I've seen them disintegrated on multiple occasions. Too much pressure and heat in a turbo application. They are ok on NA engines but a s/h factory Mx6 gasket is likely to be more reliable.
My MX6 had the bolts on turbo manifold break in block too. I could not get them out. Took mechanic I got in a full day to defeat them.
T4 and a megasquirt. Clean out EGR passage (known to block) Box will take close to 400hp. Fast reliable, dailied one for years running a Microtech and gt28. Lost it in a house fire in 2018
R.I.P
I love this cars😊
I had a white 6262 turbo I spend $400 on eBay for a t3 t4and heap of bits a external gate and intercooler all was new but 2nd hand never used,welded a t3 flange 3” stainless dump and intake on 6 psi it would rip haha
man I hated doing clutches in my 92 turbo
Looks like someone is doing a water pump seal.
Are those 3D printed bushes going to last?
Depends what he printed them in... hope it was at least PETG
Episode 3? Been over a year between episodes 😖
The transmissions on these are pure glass!
Oh, we know from back in 1999-2000
@@MotiveVideo Same! Worst car I’ve ever owned to mod. No parts were available back then, and it would hit fuel cut so easily with raised boost. 😂
Most of Mazda’s 1990s transmissions were. I swapped out a few gearboxes in my TX3 back in the day. That’s why people are putting in MR2 boxes into high powered FWD Mazdas nowadays, and GT4 or RAV4 boxes into the AWDs.
@@daniel.s8126 mr2 box fits in the mx6?
Continue on the gtr build.
They want to but shops are only just getting back into work, and have a backlog.
i dont wanna fix my first car, i actually dont even want to see it again.
was a TR Magna :/
Nothing pisses me off more than seeing grubs touching brand new parts and fitting them with filthy hands. Have some pride in your work, really doesn't matter what car it is.
lolol ok
Whats with the music