Evo All Programming ( Using The Flashlink )

Sdílet
Vložit
  • čas přidán 10. 09. 2024
  • This is how you can flash and setup your new evo all module for your remote start system install utilizing a flashlink updater.

Komentáře • 68

  • @stephen44911
    @stephen44911 Před 9 lety +1

    I'm glad you made this video for us people that don't know how to do this. You are very helpful. On my install it kept on shutting the car off when I opened up the door, driving me crazy. But someone told me that I needed to reflash it and it will fix it. I just ordered my flash link 2 today. We will see what it does for me.

  • @qhall3488
    @qhall3488 Před 3 lety

    When I plug my evo in all 3 lights just blink....whats the problem

  • @DinasGarage
    @DinasGarage Před 10 lety

    Martin Thank you so much! I have the flashlink and a few evo alls and you helped with the error and clarified in update for me Thank you!!!! Awesome! Customer and Subscriber for life!

  • @rickyrodriguez3176
    @rickyrodriguez3176 Před 3 lety

    My fortin only has a red light on when i plug it into the flashlink

  • @adamjensen6376
    @adamjensen6376 Před 3 lety

    Hi there I have a 2012 mitsubishi lancer se I installed fortin evo all year ago it was working perfect until I stop using it for 2 months and it stop working I reset the module and repeat the routine all over and now no luck. The light next to reset switch flash rapidly on the first click then on the second click it slows down then on the third click my lights flashs but it won't over turn.
    Can someone help me out here

    • @Lesscoelectronics
      @Lesscoelectronics  Před 3 lety

      try relearning it to the car, you may need to download the instructions from fortin's site..

    • @adamjensen6376
      @adamjensen6376 Před 3 lety

      @@Lesscoelectronics Thank you I found the problem already I installed after market tail lights (leds) and it gives a feedback loop which I didnt put no loader onto them to stop the feedback loop

  • @pierceproductions3604
    @pierceproductions3604 Před 2 lety

    I live in Texas and I’m seeking a pre programmed evo remote start system for a 2011 Ford Fusion se v6 . I don’t see one on your site. Can I buy one pre programmed from you? Where is your shop located ?

  • @tomnguyen9773
    @tomnguyen9773 Před 10 lety

    Hi Robert, it is a very good video. I just installed one on my 2012 honda civic today and everything work, except the two wires hook up to unlock and lock the door does not work. Does it have to do with programming the EVOL ALL. Thank you.

  • @frankieavalanche1805
    @frankieavalanche1805 Před 4 lety

    will this EVO ALL the only thing need to install on a 2013 Terrain ?

  • @The80moody
    @The80moody Před 4 lety

    I have a 2017 ford escape using evo fort-4 can I program the car to turn on the heated seats and heat when I remote start it and how

  • @MilesLacoste
    @MilesLacoste Před 9 lety

    do you guys have pre-programed EVO-ALL for honda accord 2008 that I can purchase from you?
    What T-harness should I get so that it will work for my car? I checked fortin.com website but I cant find the T-harness specific for honda accord 2008 coupe. Please help me. Link would be more helpful with your advice. thank you.

    • @Lesscoelectronics
      @Lesscoelectronics  Před 9 lety

      I have honda kits preset to go at www.lesscosales.com or call us 904 342 5491

  • @dtaposse8858
    @dtaposse8858 Před 3 lety

    Do u have a plug and play remote start 2009 Toyota Tacoma what's the cost and do u have a contact # thx

  • @jdmsir231
    @jdmsir231 Před 10 lety

    So I have the evo all installed but I was advised not to disconnect my battery cables unless I knew how to reprogram the module or else the car would no longer start? Is that true?

  • @grahamlocklin
    @grahamlocklin Před 8 lety

    What is the key bypass?
    I as because a friend miata's key ring for security is failing and the dealer can't seem to get parts. its been months. So if there is a way to use something like this to by pass the key ring and just use the key to turn the car on and off (not get the code from the key but from a bypass of sorts) that might be a cheap; and only way to work around the hole "no parts" problem.

  • @reymonsencion5300
    @reymonsencion5300 Před 4 lety

    greetings what is the difference between the Evo All and the Evo One Thank you

    • @Lesscoelectronics
      @Lesscoelectronics  Před 4 lety +1

      they're very similar, except the evo-one can do manual trans and also handle high current applications + do can bus simultanously. (and also has more programmable options).

    • @reymonsencion5300
      @reymonsencion5300 Před 4 lety

      excellent answer ... another question all Evo all have the remote start function

  • @margarito356
    @margarito356 Před 8 lety

    hey. I have a problem with Evo all. at programing the blue light come on but when time to finish is not working and a amber light on ..what can I do for getting to work??I will appreciate if you can help me.... Thanks

  • @robertlopez2133
    @robertlopez2133 Před 10 lety

    Do I need an aftermarket remote start with the evo all without the t-harness or can I hardwire it in and use the lock x 3 to start?

  • @jdmsir231
    @jdmsir231 Před 10 lety

    How much do you charge to program the evo all bypass? Lessco Electronics

  • @christianlarose1203
    @christianlarose1203 Před 7 lety

    i have the Solid Blue Light but when i turn the Ignition [ON] , the blue LiGHT REMAIN the same... i dont know if its a FLASH problem or sth else ..any help please.

    • @brandonfaletti5899
      @brandonfaletti5899 Před 7 lety

      im having the same issue,. did you figure this out

    • @Lesscoelectronics
      @Lesscoelectronics  Před 7 lety

      the blue light signifies a canbus connection issue, see if your grey and grey/black are reversed..

  • @robertlopez2133
    @robertlopez2133 Před 10 lety

    Will I need a transponder key bypass with the evo all and after market remote starter?

  • @jdmsir231
    @jdmsir231 Před 10 lety

    Will I still need a third transponder key for the installation of the Fortin?

  • @matthewwilcott1494
    @matthewwilcott1494 Před 5 lety

    I have a 2014 murano. followed your video exactly. once i programmed it the red light was flashing. No remote start function at all not sure where i went wrong

    • @Lesscoelectronics
      @Lesscoelectronics  Před 5 lety

      I dont have a video on a Murano..

    • @ferdnard1152
      @ferdnard1152 Před 5 lety

      Is your car push to start? According to the Fortin website 2014 Murano push to start should work but if you use a key or intelligent key then it looks like it wont. Not sure if Nissan dropped keys on that model after 2007 just wondering if that could be your problem.
      fortin.ca/en/products/evo-series/evo-all/vehicles.html#nissan

  • @Pearljammin56
    @Pearljammin56 Před 3 lety

    Terrible. Can't see the screen.. why bother showing it??

  • @toyotrustPR
    @toyotrustPR Před 10 lety

    Great video. thank you for the tips.

  • @jdmsir231
    @jdmsir231 Před 10 lety

    Does lessco electronics have an official site where we can make the transaction?

    • @Lesscoelectronics
      @Lesscoelectronics  Před 10 lety

      why yes we do, its lesscosales.com
      the service you want it called "flash"

  • @donovansn5851
    @donovansn5851 Před 6 lety

    How do I talk to you guys about a remote starter I installed. I think I need the flash link updater. I am looking at installing these as a service for my customers and just need a little info

  • @robertsutherland4518
    @robertsutherland4518 Před 7 lety

    Thanks for your prompt reply, for my application, if I understand I need to purchase the evo all ford and get it flashed to My 2016 euro ford ranger xlt and I can install the cs800s Cheers robert

  • @jetskier47
    @jetskier47 Před 8 lety

    do i need one for a 2014 ram promaster cargo van thanks ?

  • @tiggermix
    @tiggermix Před 3 lety

    oh C'mon. Free is good.

  • @onassislegaspi2547
    @onassislegaspi2547 Před 9 lety

    Can you make a video installing Foltin evo all to a toyota 4runner 2015...tnx

  • @robertlopez2133
    @robertlopez2133 Před 10 lety

    2006 Infiniti g35, standard transponder key

  • @rotceh0410
    @rotceh0410 Před 8 lety

    Hi, a Viper Smartkey module will work with an Evo One?

  • @robertsutherland4518
    @robertsutherland4518 Před 7 lety

    Hi Martin,I'm located in Australia and have been watching your videos for remote start on my 2016 3.2 diesel ranger euro. I have the compustar cs800s and wish to add the forin bypass and harness. Is it possible to purchase these items along with drone 3400 through your eBay store? Cheers Robert

    • @Lesscoelectronics
      @Lesscoelectronics  Před 7 lety

      yes, I ship worldwide, (however the drone doesnt work in AU) Here's a link:
      stores.ebay.com/Lessco-Electronics/_i.html?_nkw=fortin&submit=Search&_sid=77826561

  • @ahmedbighouse2949
    @ahmedbighouse2949 Před 9 lety

    I need ur help. How can I communicate with u ?

  • @cyrusIIIII
    @cyrusIIIII Před 6 lety

    where should I download the software?

  • @reesekegley3622
    @reesekegley3622 Před 6 lety

    Not getting blue light at all

  • @jdmsir231
    @jdmsir231 Před 10 lety +2

    Lessco Electronics

  • @rogerludwig3130
    @rogerludwig3130 Před 7 lety

    please help me

  • @ocsrc
    @ocsrc Před 9 lety

    I am having a problem with my EVO ONE. Can you suggest anything that might bring it back to life ? Thanks
    Here is a video of what it is doing, or in this case, not doing:
    czcams.com/video/DDvhRrhI_9Q/video.html

    • @Lesscoelectronics
      @Lesscoelectronics  Před 9 lety

      I agree, that is most likely a st generateion model that had issues like the one youre explaining, that evo needs to be swapped, where'd you get it?
      also the rf kit setting for crimestopper is the default if I recall correctly because they work by the first option without the necessity of adding in an rf decoder unlike the usual compustar kits I add in, I had that call in to fortin in the past.

    • @Lesscoelectronics
      @Lesscoelectronics  Před 9 lety

      Lessco Electronics correction - I meant 1st generation

    • @ocsrc
      @ocsrc Před 9 lety

      Lessco Electronics I talked with them and they said they have never seen this issue before. I am going to swap it, but Fortin said people are not supposed to sell these on Ebay or Amazon. Only to be sold and installed by Fortin dealers. I did not know that when I bought it.

  • @daleroberts9556
    @daleroberts9556 Před 9 lety +3

    Enough with the slurping sucking noises dude. I can't believe you posted that.

  • @jasmachugh4222
    @jasmachugh4222 Před 5 lety

    Will the Evo All work on a 07 Sienna?

  • @margarito356
    @margarito356 Před 8 lety

    hey. I have a problem with Evo all. at programing the blue light come on but when time to finish is not working and a amber light on ..what can I do for getting to work??I will appreciate if you can help me.... Thanks

    • @Lesscoelectronics
      @Lesscoelectronics  Před 8 lety

      +Mar ca probably a loose connection, Ive had that same issue

    • @christianlarose1203
      @christianlarose1203 Před 7 lety

      hi Castillo , did u get any help for u Post;;;im having the same problem in a 2017 Jeep wrangler unlimited ;;; im looking for some help cant find anything . if u resolved ur problem , please let me know what did u do .....Thx

    • @margarito356
      @margarito356 Před 7 lety

      No I didn't receive any help is still the same problem

    • @christianlarose1203
      @christianlarose1203 Před 7 lety

      what kind the car do u have? if u have a jeep make sure u buy the one for Chrysler dodge Jeep... i got a Evo Combo from walmart i had to return it bc they shipped me the wrong one ;;;; get the one Chrysler Dodge Jeep and u will be fine ..