Toyota Keyless Entry Remote Replacement Programming Corolla Camry Highlander Sienna

Sdílet
Vložit
  • čas přidán 22. 10. 2010
  • Visit us at www.carandtruckremotes.com/
    List of vehicles applicable
    2003 2004 2005 2006 2007 2008 Toyota Avalon keyless remotes
    2000 2001 2002 2003 2004 2005 2006 Toyota Camry keyless entry remotes
    2000 2001 2002 2003 2004 2005 Toyota Celica remote controls
    2003 2004 2005 2006 2007 2008 2009 2010 Toyota Corolla remote keyless system
    2000 2001 2002 2003 2004 2005 Toyota Echo remotes
    2007 2008 Toyota FJ Cruiser key fobs
    2001 2002 2003 2004 2005 2006 2007 Toyota Highlander car remote controls
    2004 2005 2006 2007 2008 Toyota Matrix car remote transmitters
    2000 2001 2002 2003 2004 Toyota MR2 keyless transmitters
    2001 2002 2003 Toyota Prius remotes
    2001-2010 Toyota RAV4 keyless entry remote control
    2004-2010 Toyota Sienna minivan remotes
    2004 2005 2006 2007 2008 Toyota Solara coupe and convertible remotes
    2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Toyota Tacoma keyless entry transmitters
    2004 2005 2006 Toyota Tundra remote controls
    1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Toyota 4Runner remotes
    Procedure To Program Toyota Wireless Remote Transmitters:
    Begin with: The driver's door open and unlocked. Key out of the ignition.
    1. Insert and remove the key from the ignition switch 2 times within 5 seconds.
    NOTE: Steps 2 and 3 should be performed within 40 seconds.
    2. Close and open driver's door TWICE.
    3. Insert the key into the ignition and remove it.
    NOTE: Steps 4 - 6 should be performed within 40 seconds.
    4. Close and open the driver's door twice.
    5. Insert the key into the ignition.
    6. Close the door.
    NOTE: Steps 5 and 6 should be reversed for the following models ONLY (close door first, then insert key into ignition):
    2000 - 2005 Celica
    2001 - 2003 Prius
    2001 - 2005 ECHO
    2001 - 2005 RAV4
    2003 - 2004 Avalon
    7. Turn the ignition switch from "Lock" to "On" and back to "Lock" at about 1 second intervals to select the desired mode:
    1 time for ADD mode.
    2 times for REWRITE mode.
    3 times for CONFIRMATION mode.
    5 times for PROHIBITION mode.
    8. Remove the key from the ignition.
    9. To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 7.
    NOTE: If Confirmation or Prohibition modes have been selected, opening the door will complete the procedure.
    10. For Add or Rewrite modes do the following within 40 seconds of Door
    Procedure Lock confirmation:
    A. Press both car transmitter Lock and Unlock buttons simultaneously between 1 and 1.5 seconds and release.
    B. Within 3 seconds of step A, press the transmitter Lock button for more than 1 second and release.
    If the keyless entry remote transmitter has been successfully programmed, the power locks will cycle "lock" to "unlock" once at this time.
    If there are problems with the remote transmitter or the procedure up to this point, the locks will cycle twice. If this occurs, verify that you have received the correct transmitter, and then repeat the above procedure.
    C. If multiple remotes are to be reprogrammed, repeat steps A and B.
    11. Open the driver's door to conclude programming mode.

Komentáře • 940

  • @corey_axler
    @corey_axler Před 8 lety +3

    Thanks so much!!! I can't believe our dealership had to make an appointment to fix our keyless remote (before I knew of this video!) This was a huge time-saver and now if there is ever a problem I can just go out to pep boys and get a new one!

  • @GiaHuyNguyenAtlanta
    @GiaHuyNguyenAtlanta Před 9 lety +4

    THANK YOU VERY MUCH!!! I just lost one of my Toyota Highlander 2005 remotes, and since I have an old Tundra 2006 remote laying around, I programmed it with my Highlander and it works PERFECTLY!!

  • @xvjk5007x
    @xvjk5007x Před 8 lety +2

    Thank you! I just lost my FOB and your instructions for rewriting saved the day! Liked and subscribed.

  • @tfadius
    @tfadius Před 3 lety

    I literally thought my remote was broken for years!!!! This helped me fix it. You guys are amazing.

  • @TrangTran-nk3fu
    @TrangTran-nk3fu Před 7 lety +11

    it works with toyota camry 2011!! thank you so much!! this is so helpful!!!

  • @nestorm4
    @nestorm4 Před 8 lety +27

    ha! and to think the bastards at the dealership wanted to charge us $500 for this. I just bought 2 keyless entry remotes from Amazon for $25.00 and will be programming them myself. Thanks for the video!

  • @TONAH
    @TONAH Před 6 lety +2

    YOU DESERVE A MEDAL!! I just followed your written explanation and got it on the first try!!!

  • @jasongonzales2505
    @jasongonzales2505 Před 8 lety +1

    Worked on my 2012 Tacoma. Thanks for the video. It's way easier than I expected.

  • @andrewgancinia
    @andrewgancinia Před 5 lety +5

    Thanks for explaining the “add another key” vs. “reprogramming”

  • @Bladecarandang
    @Bladecarandang Před 8 lety +4

    I own a 2004 toyota camry and when I follow the instructions the car locks and unlocks on its own but when I press down the lock and unlock buttons together followed by the lock button again, it doesn't seem to work. I tried it 3 times so I know I'm doing it correctly. Any reasons why this isn't working? Thanks

  • @lisaphilyaw961
    @lisaphilyaw961 Před 5 lety +1

    I just bought 2 spare keyless entry remote from Amazon for my 2013 toyota and followed these steps and it worked.....awesome....ty so much💖

  • @rahulparmar05
    @rahulparmar05 Před 10 lety +1

    Just got Keyless Remote and with this video programmed the remote with in 5 min....
    Really helpful and saved $170

  • @xiomaraparedes2223
    @xiomaraparedes2223 Před 7 lety +2

    to think that I brought my keyless remote almost three friking months ago, and just today I decided to program it. how easy was that. Thank you so much guys. btw, I had to do it twice cus I keep messing up steps... lol but it was worth it. I finally breath relief.

  • @jmfirefox03
    @jmfirefox03 Před 8 lety +2

    Thank you! This was the third video I watched and it worked like a charm!

  • @tomduncan1970
    @tomduncan1970 Před 8 lety +1

    After trying other unsuccessful methods, This is the correct procedure for my 2009 Matrix. Worked perfect. Thank you.

  • @polemeros
    @polemeros Před 6 lety +1

    Thanks for this. Very helpful to actually see it done before trying to do it from a printed page. It worked for me on my 2004 Toyota Matrix, after my keys were stolen; fast and easy. Good job!

  • @fzaaaa2011
    @fzaaaa2011 Před 9 lety +1

    I just finished from programming my car remote. The way did work on my Toyota Avalon 2004. Thank you so much Sir and I appreciate your help 👍

  • @beatrizmester986
    @beatrizmester986 Před 9 lety +1

    I just reprogrammed the two remote controls of my Toyota Camry 2006 following the instructions of this video. Thanks So much!!!!

  • @jamesoliver1336
    @jamesoliver1336 Před 5 lety

    This video is perfect! My car ('07 Toyota Camry Solara) randomly "forgot" the remote and this video helped me to reprogram it again. Thanks so much!

  • @dearally4787
    @dearally4787 Před 8 lety +2

    Thank you so much for uploading this tutorial. I bought a remote on amazon for $20 for my 2010 Corolla LE and programmed on the first try using this video! Saved me a ton of money!