How to make remove the gears from the motor with one minute - KST HACKS
Vložit
- čas přidán 18. 10. 2018
- Hello my dear friends, in this video I'm going to show you. How to make remove the gears from the motor with one minute. Thank you for watching!! Please subscribe to get more interesting videos: goo.gl/WV8MGN
► Facebook: goo.gl/rQ32cm
► Blogspot: goo.gl/Ya2DPg
► Fanpage: goo.gl/zFnXcg
► [Support]: goo.gl/ZQRAU1
Thank you for watching your video. Please share your video to support me!
Love all of you :)
----------------------------------------------------------------------------
© Copyright by KST HACKS ☞ Do not Reup
----------------------------------------------------------------------------
#KSTHACKS #LIFEHACKS #CREATIVE - Jak na to + styl
thank you❤ i bought a motor for a project that came with a gear and i tried literally everything. this is the only solution that worked
Great job. 👍 If it wasn't with the help of this, I wouldn't have been able to remove the wheel from the motor without damaging It. It helped and worked for me very well. Thank.❤
No problem 👍
worked great, very simple. Thanks.
Simple and effective. Thank u.
Ohh my finally I’ve been trying all day to take mine off thank you very much!
Thank you bro for your idea😊
One big salute for you
ikr?
Thank you for sharing this I'm going to give it a try
Obrigado pela dica, Deus abençoe sempre!
Casualy today found You Video it was very helpful because i have not enough tools...greetings from México Cancún!!
Thanks for watching!
thank you i have multiple motors with metal gears stuck on them i tried to remove for a long time but always failed i will try your tip
🌷👍Thank you very much. I have a motor. I need to remove that thing, and I suffered a lot. This video saved me
You are welcome
You are right
mee too!
Bro your video has saved my life and it will save it again
Parabens! muito util.
mine was stuck so hard and heat and everything we searched up didn't help but this did it MOST HELPFULL RC VIDEO EVERRRRRRRRRRRRRRRR!!!!!!!!!!!!!!!!!!!
very cool. Looks like similar concept to removing metal watch band links. Thanx for sharing.
Now I've filled to gaps in knowledge that have always bothered me. Nice 1 🙂
Now I've filled to gaps in knowledge that have always bothered me. Nice 1 🙂
I think a rubber band around the grips would have gone a long way
Lo mismo pensé
Thanks bro for this awesome idea..😊😊
No problem 😊
I like the simplicity of how you did it
does it mess it up when you are slamming into it?
Obrigado pela ideia cara
Why didn’t I think of this that’s a great idea!
Worked! Thanks
You're welcome!
Thanks helped so much
No problem
Be very careful if you want to reuse the motor!!
It might happen that you break the copper wire where it is connected at the collector! (happened to me once!)
congratulations! very useful.
Thank you! 😃
Thanks bro👍👍
Welcome 👍
Amazing thanks man
No problem!
you are the freaking best!
MERCI BEAUCOUP 😚
your method usually works very well, but i have a motor which had the gear so stuck that i broke the motor (something inside now does not allow the motor to move)...it was so stuck and i've also heated up the gear so that it gets larger than the axle, but it did not work...that aliexpress 550 brushed motor made me go crazy
Sorry to hear that
Will this damge the motor?
Waw great simple video
Thank you 🙂
Thank u so much buddy🥺
No problem 👍
Thank you
My motor's gear's hole doesn't go all the way through...
Mera 130 DC motor mey metal gear Laga hey Jo ki nikal hi NAHI raha
But how to remove connecting shaft?
just heat the pinion little bit and then you can take it off easily
Is that pinion glued on to the shaft?
Is that why heat can take it off.
@@Loudes012 shaft and pinion materials have different heat transfer coefficient.
Some are applied with heat and shrinks itself in place while cooling, some shafts have grooved tips and are placed with a drop of clear high temp lock tight. Either way heating it will remove it.
Thanks
It worked thank you
You're welcome!
thank you bro
No problem
Hello Brother aapne jo Pinoin Gear nikale ho motor ke shaft se Wo Pinoin Gear kaha pe milegaa
Herkes çektirme aparatı ile göstermiş. En pratik senin yaptığın. Teşekkürler. 👍
Nice 1 🙂
Thanks 😋
Man has that out of the groove opening music
Where from i buy this gear ?
this might work... i need gear off old motor to put on new one... the pliers used like that i never thought of..
The idea is so simple and brilliant but the demonstration lacks everywhere XD
I got mine off. where can you buy the gear wheels? I am working on a floor sweeper.
Did you find a way?
@@SivanandaSaiChilukuri NOT YET. I used a rubber band wound around the motor spindle
@@ChaZacIsa wow. thanks.
That’s clever
60 minutes
How can get This type of steel or brass gear
Did you get it?
How did you get the back piece off
I just heated the geat with a torch and plyers pulled right off. Cooled with a cup of moter oil.
Does bro have 2 pieces of wood held together with electrical tape??
How to fix gear not turning with shaft of the dc motor just the motor turn and the gear not it id fit on the shaft but it spin on the shaft without the axe of the motor turning
And what if the pinion does not have a hole in?
no sabia que se podia quitar, lo voy a probar
is motor working after this
What’s the name of the pliers?
Which motor is it?
Look loke a drill motor cuz I have 3 lol
Bang di mana jual dinamo
Nicee
Very nice
bánh răng có lắp lai morto được ko
có nhé ThuVõ
Lm v có hư moter ko ạ
không nhé Bé lùn, đây là cách gỡ đơn giản mà hiệu quả không làm hư hỏng nhông hay motor
How volt that DC motor
5 -> 12v dc )
has solo con el martillo sacar clavos easy
It's not actually that simple
Wow
Sao giống của kênh sáng chế vậy anh
My b in side magnet is break
one minute????
wow
Koplo. Trekker modif man
That doesn’t work. It drove the shaft through the back of the motor, RUINED.
it work you need to hit it with a 3lb hammer like a man
i just did it on my bed with wards master 4 inch vise korea pilers and a harbor freight 3lb engineers hammer (sledge)
I'm assuming his situation is like my particular one which is that it's a good pinion on a bad motor
Mujhe Chhaiye thaa
video hay vl
khen đểu đấy ah :3
Ih
Самая глупая идея из всех, что я видел. Можно было бы и доски поровнее найти...
*but
🤣🤣🤣🤣
😊😊😊😊😊❤❤❤❤❤❤
Thanks